You got to think about how powerful that gun is. Every .30 caliber I know that puts out over 100fpe doesn't like pellets. those pellets are going over 1000fps. Also, AEA .30 calibers are all chambered in .303 so if you get a chance try some .303 slugs. Maybe I can send you some sometime. My .30 Standard, and Challenger pro both shoot .303 AVS slugs, an NSA .303 slugs perfectly. they don't like pellets at all. I got plenty of pellets that are being wasted because it took me a lot of money to figure it out. 🤣
Cool. But first I have to get this gun to fill, the gauge isn't moving correctly my compressor was at 3700 psi and blew a oring on my water separator but the Terminator gauge shows 200 bar something is off so I filled my blitz with no issues I needed to check with Terry
@airpower7692 Yeah, I had the same problem with my 32-inch barrel .30 caliber. The AEA gauges are cheap. My gauge on that gum has broken twice. Saying it's at 5000psi when it's only at 2800psi and even saying 0psi
GOOD DAY ROY, IF YOU WANNA SHOOT THAT HUNDRED FT LB GUN IN THE back yard i got a cheaper solution. rubber mulch from home depot or lowes in a plywood box all you need for a hundred ft lb is either 6 inches thickness rubber mulch or 3 inches thickness and a steel house door in front and back, i usually just cut the doors in half and screw a 2x4 between them for the 3.5inches one stud cut three ways will be bottom and sides leaving the top topour the rubber mulch in , that will also help you retrieve the lead for recasting. i am using a similar barricade with a 2x4 flat and another wide for a total of 5.25inches thickness and a half steel house door on front and back and i shoot my 51cal element max at that and it does not make it through. 1/16th inch steel plate is easy to get at home depot to make the surface new after it gets a bunch of holes in it.or a semi-trailer mudflap of rubber is mostly self healing. just add paper targets. oh a fiber optic iron sight is easier for ranges under 60yards than that red dot. smiles.yes one of those barricades can be built for under $50 if you got a dented steel door in the back yard . or in someones trash haha. trip to the dump is where i get mine.
Once I get this gun dialed in then I'll feel more comfortable in my back yard with proper back stops but I need more time with it too make sure it's going to be good enough and not just shoot all crazy on some shots
Thanks for the video , I tried to put hole on my old frying pan thick one , couldn’t get it done w 357 terminator or .25 AEA hp ss+ , put terminator .30 cal 50gr pellet did it , I think personally this gun is one of the best pcp
super red dot trick is this its super = get a 1 inch lift under your red dot and sight it in obviously however your going to pair that with a (low) profile tactical front iron sight ,,. just put the iron sight out as far as the rail will allow it is lower ,. the red dot is true center however the other center is the iron sight this helps in keeping the gun level and gives the advantage of red dot and then like a set of cross hairs in the front the iron sight ,. it works well and will improve the performance of a red dot only way i will shoot is with both sights ,. theirs still sum trust in the iron sight
You got to think about how powerful that gun is. Every .30 caliber I know that puts out over 100fpe doesn't like pellets. those pellets are going over 1000fps. Also, AEA .30 calibers are all chambered in .303 so if you get a chance try some .303 slugs. Maybe I can send you some sometime. My .30 Standard, and Challenger pro both shoot .303 AVS slugs, an NSA .303 slugs perfectly. they don't like pellets at all. I got plenty of pellets that are being wasted because it took me a lot of money to figure it out. 🤣
Cool. But first I have to get this gun to fill, the gauge isn't moving correctly my compressor was at 3700 psi and blew a oring on my water separator but the Terminator gauge shows 200 bar something is off so I filled my blitz with no issues I needed to check with Terry
@airpower7692 Yeah, I had the same problem with my 32-inch barrel .30 caliber. The AEA gauges are cheap. My gauge on that gum has broken twice. Saying it's at 5000psi when it's only at 2800psi and even saying 0psi
@@airpower7692 I'm looking into buying a Huma gauge or a digital gauge.
@@dougiefresh3767 Terry is looking in to this issue for me
@airpower7692 Yeah well its the gauges. I have 6 AEA's, and I've that issue twice with 1 gun and once with another.
Great video Roy, you'll get it dialed in for sure
GOOD DAY ROY, IF YOU WANNA SHOOT THAT HUNDRED FT LB GUN IN THE back yard i got a cheaper solution.
rubber mulch from home depot or lowes in a plywood box all you need for a hundred ft lb is either 6 inches thickness rubber mulch or 3 inches thickness and a steel house door in front and back, i usually just cut the doors in half and screw a 2x4 between them for the 3.5inches one stud cut three ways will be bottom and sides leaving the top topour the rubber mulch in , that will also help you retrieve the lead for recasting. i am using a similar barricade with a 2x4 flat and another wide for a total of 5.25inches thickness and a half steel house door on front and back and i shoot my 51cal element max at that and it does not make it through. 1/16th inch steel plate is easy to get at home depot to make the surface new after it gets a bunch of holes in it.or a semi-trailer mudflap of rubber is mostly self healing. just add paper targets.
oh a fiber optic iron sight is easier for ranges under 60yards than that red dot. smiles.yes one of those barricades can be built for under $50 if you got a dented steel door in the back yard . or in someones trash haha. trip to the dump is where i get mine.
Once I get this gun dialed in then I'll feel more comfortable in my back yard with proper back stops but I need more time with it too make sure it's going to be good enough and not just shoot all crazy on some shots
Nice!! it looks good.
👍 Roy I hope you get your gage problem fixed !
Terry is on it
@@airpower7692 👍👍
Thanks for the video , I tried to put hole on my old frying pan thick one , couldn’t get it done w 357 terminator or .25 AEA hp ss+ , put terminator .30 cal 50gr pellet did it , I think personally this gun is one of the best pcp
It's because AEA airguns love manly slugs💥👍 They don't like paper shooting pellets😖
How many shots per fill?
@@TheSlvrnkl 22
Any reliability issues?
Not so far it seems to run good
super red dot trick is this its super = get a 1 inch lift under your red dot and sight it in obviously however your going to pair that with a (low) profile tactical front iron sight ,,. just put the iron sight out as far as the rail will allow it is lower ,. the red dot is true center however the other center is the iron sight this helps in keeping the gun level and gives the advantage of red dot and then like a set of cross hairs in the front the iron sight ,. it works well and will improve the performance of a red dot only way i will shoot is with both sights ,. theirs still sum trust in the iron sight
Is it possible for this rifle to be a double bottle?
Yes you can get s rear tank to replace the folding stock and it's a second bottle
Really I have talk to fox air power llc they said they don't know, and they have not seen anyone done it to the .30 cal terminator.
@@renatoganaden10 you mean you want 3 bottles on it cause you do know the folding stock can be replaced with a bottle
@@airpower7692 no sir I just want to replace the folding stock to a second bottle just like the .357 cal.
@@renatoganaden10 ua-cam.com/video/VYxTdC_UkRs/v-deo.html
Turn the pressure down to about 850
I need this gun