Repairing a Polaris Robotic Pool Cleaner | How to Replace Parts on a Polaris 9450 Robot Cleaner
Вставка
- Опубліковано 13 вер 2024
- If you're trying to fix your Polaris 9450 Robotic Pool Cleaner this is the video you want to watch. We will show you how to replace some of the plastic parts on your pool cleaner and get the Polaris up and running in no time.
❤ SUBSCRIBE - www.youtube.co...
🎁TIP JAR - PAYPAL: paypal.me/vipp...
Legal Notice: Any electrical connected to your hot tub or swimming pool should be worked on by a licensed electrician.
-----------------PAID LINKS BELOW------------------------------
✔ Polaris Parts Canada
poolproductsca...
✔ Polaris Parts USA
sunplay.com/co...
✔ Pool and Spa Test Kit
amzn.to/3MegnnZ CANADA
amzn.to/3xx3hhG USA
✔ Pool Salt Tester
amzn.to/3zKmxbg CANADA
amzn.to/41exfm7 USA
✔ Pool and Spa O-Ring Lube
amzn.to/3Eq40mq CANADA
amzn.to/3KVn2Du USA
✔ Pool and Spa Wrench
amzn.to/37XbbGz CANADA
amzn.to/3KVn2Du USA
😎 Join this channel to get access to perks:
/ @vippoolsandspas
Thank you so much for this detailed video. And especially for stating how the back wheels are not easy to remove. I wrestled with them for nearly 30 minutes until I gave up. I’ve searched high and low and finally your video showed in my google results. Def a video to save for future reference and subscribe cause I’m sure you have other videos that will help
Glad it was helpful!
Hello VIP POOLS. Did your P945 stop spinning on one side. Is that the reason you changed out all the gears and plastic. I have my left side not spinning causing it to go in a circle. Will this fix mine?
@@shaunbarnes4420 yes, this one was going in circle. You can see the gears without removing them to see if they are worn down.
Hello again VIP Pools. Do you know if the Polaris 9450 parts will work on the p945. Looks like the same machine. Took mine apart and my gears are definitely worn down.
@@shaunbarnes4420 yes
Can you share the grease or lubricant brand for the wheels. I did not see a link anywhere for it. Also, FYI I am 3d printing the plastic parts. The file is free on printables.
Where I can buy this part. Thanks
All links for parts should be in the video description.
Qomotop robotic pool. Cleaner model HJ1103J a charging port protector
Yes I'm looking for a charging Port protector
Mine didn’t last a year! I just got an error message that it couldn’t finish its cycle. My roller and wheel doesn’t spin on the right side. Everything is super wobbly. It’s a shame that you spend $2000 for one of these units and it craps the bed after such a short time I don’t understand. I’m gonna try your procedure, so thanks for the post.
I love these robots. I have 4 of them that I put in customers pools or I rent them out. I do have a few other videos on these, but haven't had time to edit them to put them on here.
When trying to remove the front wheels, how do you know where to rotate the wheel so that the axel tab is in the 12 o'clock position and reachable to push down with a screw driver. We have tried everything and cannot get the wheels to come off.
Might have to drill it out. Then you have to get new part
@@VIPPoolsandSpas Thanks for your response. We have even tried drilling and the wheels still won't release. May need to call in the professionals!
@@susandeacon7530 Hello Susan, I was just able to remove the wheel on mine. It's tricky but with patience, and a but of force on the tab with a blunt screwdriver ( i used a robertson #2 ) it eventually worked. The tab is on a sleeve which does not rotate... I had the same thoughts as to how to position the wheel at 12 o'clock...!
Will this fix the error 02 issue?
Check the connection. If it's all good, it will be a motor problem on one side. Could also be something stuck on a wheel
@@VIPPoolsandSpas thank you