Thanks a lot for these very useful videos. You saved me hours of reading the 70+ pages user manual with low-quality pictures and approximate translations. Your explanations are very clear, keep up the great work !
Thank you so much for this video. I was nearly panicking, as never put together a sewing machine, and I’ve been given one as a present. You saved my life! Happy sewing I go! Thank you!! xx
Girrrrrl this video was perfect for someone who has never even touched a sewing machine before! It was even helpful when I encountered a jam in the lower bobbin! Look at me, using proper terminology:) thanks!! I FEEL like I know what I’m doing now haha
Hi. I'm teaching someone to sew today. They have this machine. Thanks for the instruction...I have all Brother machines so I see they are similar. Thanks.
Thank you very much dear...I bought this similar sewing machine since 2018 and I discovered that the DVD wasn't in English and I kept it hoping to figure it out through UA-cam and I couldn't see any video to help me and I couldn't also return it to spotlight where I bought from cos one month grace had elapsed. Since then I have been praying and hoping that GOD will send Angel to help me and you are that Angel. I am super grateful to GOD for this video cos I will do so much from this machine and profit by the Grace of GOD. GOD bless you greatly dear.
Thank you very much dear once again for being answer to my prayer. Yes please... I shall be grateful if you could add a video on how to select the stitch length and width on variety of fabric e.g like how to select the pattern on satin/light weight fabric and how to make buttonholes please. GOD bless you always dear.
Thank you for taking time to make this. I'm struggling to know how to move the needle and presser foot side ways to different measurements on the base panel, and since my needle snapped and I replaced it I cannot seem to thread the lower thread. It's driving me nutty! Any suggestions??
Hi thanks for video it was really helpful however I have a big problem when I place the bobbin case back inside the machine there is a piece of mental that comes out from the space where u r to place the bobbin case is that supposed to happen. Desperate for answers thanks
Thank you for helping with my problem. I'm setting up my machine for the first, and ran into a little problem with threading the bobbin. Booklet instructions are not very clear, and there is no diagram of machine. Sure hope you have videos of how to do different stitches. That will be my next project. Wish me luck. Have a good one😊
thank you for this vid... I bought my machine without english manual so your vid is very helpful but it's hard to put thread on the needle. I hope one-day i can do it perfectly.
Hello Dede, thanks for the video's. I have one particular problem I can't find an answer for : when the topthread snaps and is stuck in the machine, how can you release the tension and easily ( without it breaking and getting stuck in the machine) take the thread out and rethread. Kind regards, Fabienne
Thank you....I've struggled for ages to this. I still couldn't work the self threader as I couldn't see the 2 hooks you mentioned. But I manually threaded it. If you could show me how to thread the needle again that would be amazing. Thank you
thank u so much I subscribed immediately cuz I have the same machine. my problem is I followed exactly ur direction but my bovine thread won't come out. last month i worked with it correctly, today I wanted to change the bovine cuz am using another colour. but it's not coming up 😭😭
Thank you for subscribing 😊, 1. Check if your needle is inserted correctly. 2. Checked if the bobbin winding spindle has been pushed back to the left for sewing. If all these does not work then your machine needs to be repaired.
Thanks a lot for these very useful videos. You saved me hours of reading the 70+ pages user manual with low-quality pictures and approximate translations. Your explanations are very clear, keep up the great work !
Thank you so much for this video. I was nearly panicking, as never put together a sewing machine, and I’ve been given one as a present. You saved my life! Happy sewing I go! Thank you!! xx
Sheila Boyce you’re welcome 😊 and I’m glad this was of value to you 🥰
Girrrrrl this video was perfect for someone who has never even touched a sewing machine before! It was even helpful when I encountered a jam in the lower bobbin! Look at me, using proper terminology:) thanks!! I FEEL like I know what I’m doing now haha
Rae Rae yaaay I’m happy you found something that helped. There’s also a new video about stitches you can check it out. Thank you !
i have been using my machine for ages but never knew that way of threading it! soo helpful!! thank you!
I just bought my machine and have no idea how it works. Thank you so much ❤️
Great to hear, you’re welcome 💕
This was the biggest help to me . I couldn’t figure out how to work my machine . The biggest thanks . 😊
💕💕💕
Thank you for making this! It was a life saver! I had been using my machine wrong for months and getting so frustrated haha. Thank you 🙏
Hi. I'm teaching someone to sew today. They have this machine. Thanks for the instruction...I have all Brother machines so I see they are similar. Thanks.
Grazie,grazie,questo video mi ha aiutata moltissimo.
Big thanks. Wouldn't have done it without you. Why ppl have put a thumbs down I have no idea. Looking forwarded to more help.
David Nixon I’m glad this video has helped you ☺️
thank you Dede, I just got my new singer starlet and I am so excited how to start it and your video is very helpful for beginners like me....😘
You’re welcome and I’m glad this video did help out 🥰
Thank you very much dear...I bought this similar sewing machine since 2018 and I discovered that the DVD wasn't in English and I kept it hoping to figure it out through UA-cam and I couldn't see any video to help me and I couldn't also return it to spotlight where I bought from cos one month grace had elapsed.
Since then I have been praying and hoping that GOD will send Angel to help me and you are that Angel.
I am super grateful to GOD for this video cos I will do so much from this machine and profit by the Grace of GOD.
GOD bless you greatly dear.
Ukeme Jameson I glad this video has helped. ☺️
Lemme know if you want some sewing videos as well
Thank you very much dear once again for being answer to my prayer.
Yes please... I shall be grateful if you could add a video on how to select the stitch length and width on variety of fabric e.g like how to select the pattern on satin/light weight fabric and how to make buttonholes please.
GOD bless you always dear.
Alright I will do that
Thank you so much! I was struggling to set it up based on the manual and then I found this video! It was very helpful :)))
Thank you for this video :) this is my first machine and I learn best watching somebody else
Brooke Harris I’m glad this video did help you 🥰
Your video was so helpful, thank you
Thank you so much, I have the same machine and the manual is hard to follow. With watching yours so much helpful.
You’re welcome 😊
Thank you for taking time to make this. I'm struggling to know how to move the needle and presser foot side ways to different measurements on the base panel, and since my needle snapped and I replaced it I cannot seem to thread the lower thread. It's driving me nutty! Any suggestions??
Really appreciate this vid i just bought this machine!
Thank you ☺️
you are a life saver! thank you very much!
Hi thanks for video it was really helpful however I have a big problem when I place the bobbin case back inside the machine there is a piece of mental that comes out from the space where u r to place the bobbin case is that supposed to happen. Desperate for answers thanks
Thank you for helping with my problem. I'm setting up my machine for the first, and ran into a little problem with threading the bobbin. Booklet instructions are not very clear, and there is no diagram of machine. Sure hope you have videos of how to do different stitches. That will be my next project. Wish me luck. Have a good one😊
Katmandu I’m glad this video did help you, this I have a video on that as well 🥰.
Thank you and you too 😘
thank you for this vid... I bought my machine without english manual so your vid is very helpful but it's hard to put thread on the needle. I hope one-day i can do it perfectly.
Thank you a loooot, you help me soooo much ❤ 😊
U r star. Saved me 👍🏻
Thank you for this video🤩
Thank you so much ❤️❤️❤️
Hi! Have you some idea why thread blocks bobbin case and courses mashine to stop?
Hello Dede, thanks for the video's. I have one particular problem I can't find an answer for : when the topthread snaps and is stuck in the machine, how can you release the tension and easily ( without it breaking and getting stuck in the machine) take the thread out and rethread.
Kind regards, Fabienne
Hi Fabienne Bassens, does it get stuck at around the lower thread area ?
Thank You😍
Thank you
When you say clockwise you are actually demonstrating anticlockwise.
This was great!! Thanks a lot
You’re welcome 😘
Thank you....I've struggled for ages to this. I still couldn't work the self threader as I couldn't see the 2 hooks you mentioned. But I manually threaded it. If you could show me how to thread the needle again that would be amazing.
Thank you
I will be glad to help, do you have the same machine or a different brand?
Please help the eye of my needle is not lined up with my automatic threader how do I fix it??
Can I ask why my machine gets stuck and C4 shows comes on the screen, yet it does not seem to be tangled underneath, thanks.
More videos pls on how to use it. Need to know more before I buy. Thanks!
Yeah sure it’s coming soon
Blackwood Sisters there’s is a new video on how to use this machine on my channel, you can check it out
thank u so much I subscribed immediately cuz I have the same machine. my problem is I followed exactly ur direction but my bovine thread won't come out. last month i worked with it correctly, today I wanted to change the bovine cuz am using another colour. but it's not coming up 😭😭
Thank you for subscribing 😊, 1. Check if your needle is inserted correctly. 2. Checked if the bobbin winding spindle has been pushed back to the left for sewing. If all these does not work then your machine needs to be repaired.
Hi Dede im kinda stuck after 6 minutes because I'm not sure where I'm supposed to put the thread
Thank you 😊👍
You’re welcome 😉
You're great, the video's good.
I'm watching you from Turkey. Is your name Dede ? Do you know that your name means "grandfather" in Turkish? :))
Oh really, it’s interesting how things have different meanings in other languages 😁
@@StarDedee I'm trying to learn English. Its hard :(( I'm studying fashion design in high school 🙃
4:50 she said the thread should go clockwise but hers is going counter clockwise??
Can you please make a video how to oil it?
Fatima Haidari yes i can 👍🏾
Thanks
You’re welcome 😊
Einfach nur megageil 🤘🏼🔥
😍
🥰
I want to know how to embroidery this sewing machine.
N Mazumder hi I made i video on how to use this machine , it’s on my channel. I hope you find it helpful 😊
I cant find the last threading bit
Hi do you know how to speak Swedish if you do can you do the same tutorial but in Swedish so my mom can understand?
Sigh you needed to do a better video on the hidden thread path. You failed me at this point.
Thank you so much ❤️❤️