@GeorgNeumannGmbH I would buy it, if you can confirm that the AES67 will work with Dante and not only on the "Neumann or MT universe" and if there is a chance to get the "commentary mission" that the Anubis offers in the near future?
No, the MT 48 does not support Sonarworks Sound ID. For DSP-equipped Neumann speakers, we developed MA 1 Automatic Monitor alignment. This is an integrated solution with a calibrated measurement microphone and novel algorithms, including room mode detection. We’re convinced that this is the best solution available. For studio monitors that cannot be used with MA 1 (i.e. any 3rd party loudspeakers and analog KH-line loudspeakers without a KH 750 DSP subwoofer), you can use Bus EQ to counteract any room coloration. The MT 48 features a high precision fully parametric 4-band equalizer for each output pair. Click on MIX 1/2/3/4 in the upper right-hand corner of the touch display and select BUS EQ. For measuring the response at your listening position, you could for example use the REW software.
You can indeed Print the MT 48 Effects. The Channel Effects (EQ, Compression, Limiter, Gate) can be printed directly if enabling the "Analog In Post FX" under Settings > USB I/O The Reverb as it is a Parallel effect (injected in a channel), this means that it can be printed by enabling the "Bus Return Mix" under Settings > USB I/O.
Hi before tow day I get mt 48 I drive it but it not work speker output There are message in device say moniter mission is locked ? Please helpe me Im muntdhar from iraq
@@GeorgNeumannGmbH This is awesome news for those of us who are thinking of purchasing more MT48 units. Thank you very much for listening to the consumer. 🤟
Hey George. I’m having issues with audio when I connect my Mpc live 2 into my Mt48. I’m getting nothing but highs and resonance. Any reason you could think of? Literally just purchased the MT 48 today. Everything else sounds amazing. My mic sounds great. My Mpc sounds good connected to my Apollo and focusrite so I know the Mpc isn’t the issue. Please help, I’ve tried it in every input.
Hello and thank you for your message. Please contact our customer support with your request via www.neumann.com/en-en/contact/ Our colleagues will be happy to help you😊 Best regards Your Neumann Social Media Team
I was thinking of adding the KH750 Sub to. y KH310s , just to use the MA1 room correction, I really don't need a sub and prefer to work in Stereo... So would this BUS EQ be equal as MA1 for my 310s?, I prefer a system like MA1 to guide set up the room correction , does the BUS EQ do this ?
Hey Georg, Ich benutze es auf einem MacBook Pro mit Logic Pro, aber ich habe auch Adobe Audition, Reaper und iZotope RX ausprobiert, mit dem gleichen Ergebnis. Ich kann nur einen Kanal (Mikrofon) aufnehmen. Die anderen Instrumente, wie die Gitarre oder der Synthesizer (Moog Sub 37), kann ich über das MT48 hören, aber keines der DAWs empfängt das Signal vom Neumann MT48. Ich habe eine E-Mail mit der Problembeschreibung an Neumann geschickt, aber keine Antwort erhalten. Das ist wirklich frustrierend.
Hi! Nenne uns doch mal deine Ticket-Nummer, die du vom Customer Service bekommen hast. Wir erinnern die Kollegen gerne. Es ist allerdings möglich, dass zurzeit einige Kollegen im Urlaub sind, daher kann es zu längeren Wartezeiten kommen.
The only problem with this device is that the interface is terribly slow. The reaction time to presses and any actions is half a second. This is slower than cheapest smartphones from 2010. And even if it is just a matter of aesthetics, nevertheless it is terribly annoying and spoils the impression. It makes you feel like you are using an outdated device, even though it has just been released.
I'm very happy with my mt48, it's my studio's central hub for recording and mixing Stereo and Atmos.
@GeorgNeumannGmbH I would buy it, if you can confirm that the AES67 will work with Dante and not only on the "Neumann or MT universe" and if there is a chance to get the "commentary mission" that the Anubis offers in the near future?
There is a new updated Dante version shipping. Older production date ones can be upgraded by Neumann for a fee.
Nice. Can I upload my SoundId profiles like on the Anubis?
No, the MT 48 does not support Sonarworks Sound ID. For DSP-equipped Neumann speakers, we developed MA 1 Automatic Monitor alignment. This is an integrated solution with a calibrated measurement microphone and novel algorithms, including room mode detection. We’re convinced that this is the best solution available.
For studio monitors that cannot be used with MA 1 (i.e. any 3rd party loudspeakers and analog KH-line loudspeakers without a KH 750 DSP subwoofer), you can use Bus EQ to counteract any room coloration. The MT 48 features a high precision fully parametric 4-band equalizer for each output pair. Click on MIX 1/2/3/4 in the upper right-hand corner of the touch display and select BUS EQ. For measuring the response at your listening position, you could for example use the REW software.
Is there a update to download?
Hi Georg, thanks for the helpful content. Does it print vocals in DAW with effect presets set while recording e.g dolby ,reverb etc?
You can indeed Print the MT 48 Effects.
The Channel Effects (EQ, Compression, Limiter, Gate) can be printed directly if enabling the "Analog In Post FX" under Settings > USB I/O
The Reverb as it is a Parallel effect (injected in a channel), this means that it can be printed by enabling the "Bus Return Mix" under Settings > USB I/O.
Please do a rack version.
Hi before tow day I get mt 48
I drive it but it not work speker output
There are message in device say moniter mission is locked ?
Please helpe me Im muntdhar from iraq
Hello, you can get your MT 48 monitor mission on our website under “registered units”.
After June 30, this update will be charged at what value to MT48 users?
We are happy to inform you that the offer period has been extended until the first of January 2025!😊 ✨
@@GeorgNeumannGmbH This is awesome news for those of us who are thinking of purchasing more MT48 units. Thank you very much for listening to the consumer. 🤟
But how do I change from Music Mission to Monitor Mission :) ?
Just long press the home button. Of course latest software firmware has to be installed
@@BeCreativeJam Thank you so much!
Hey George. I’m having issues with audio when I connect my Mpc live 2 into my Mt48. I’m getting nothing but highs and resonance. Any reason you could think of? Literally just purchased the MT 48 today. Everything else sounds amazing. My mic sounds great. My Mpc sounds good connected to my Apollo and focusrite so I know the Mpc isn’t the issue. Please help, I’ve tried it in every input.
Hello and thank you for your message. Please contact our customer support with your request via www.neumann.com/en-en/contact/
Our colleagues will be happy to help you😊
Best regards
Your Neumann Social Media Team
@@GeorgNeumannGmbH Akai mpc have class compliment usb áudio interface, if i connect the mpc direct to MT 48 works in standalone?
I was thinking of adding the KH750 Sub to. y KH310s , just to use the MA1 room correction, I really don't need a sub and prefer to work in Stereo... So would this BUS EQ be equal as MA1 for my 310s?, I prefer a system like MA1 to guide set up the room correction , does the BUS EQ do this ?
Hey, the bus EQ allows for manual correction, but does not allow for the automatic filter creation - that's the core of MA 1.
@@GeorgNeumannGmbH Thanks for your response, so is MA1 supported and compatible with the MT48 to create the Bus EQ?
Hey Georg,
Ich benutze es auf einem MacBook Pro mit Logic Pro, aber ich habe auch Adobe Audition, Reaper und iZotope RX ausprobiert, mit dem gleichen Ergebnis. Ich kann nur einen Kanal (Mikrofon) aufnehmen. Die anderen Instrumente, wie die Gitarre oder der Synthesizer (Moog Sub 37), kann ich über das MT48 hören, aber keines der DAWs empfängt das Signal vom Neumann MT48. Ich habe eine E-Mail mit der Problembeschreibung an Neumann geschickt, aber keine Antwort erhalten. Das ist wirklich frustrierend.
Hi! Nenne uns doch mal deine Ticket-Nummer, die du vom Customer Service bekommen hast. Wir erinnern die Kollegen gerne. Es ist allerdings möglich, dass zurzeit einige Kollegen im Urlaub sind, daher kann es zu längeren Wartezeiten kommen.
Omg ❤❤❤❤
The only problem with this device is that the interface is terribly slow. The reaction time to presses and any actions is half a second. This is slower than cheapest smartphones from 2010. And even if it is just a matter of aesthetics, nevertheless it is terribly annoying and spoils the impression. It makes you feel like you are using an outdated device, even though it has just been released.
Hello, that shouldn't be the case. Please contact customer support using the form on our website.