4 axis Substitutions_Pocket Toolpath MasterCam

Поділитися
Вставка
  • Опубліковано 22 гру 2024

КОМЕНТАРІ • 26

  • @billrieck4910
    @billrieck4910 3 місяці тому

    Do you have the multi axis license when doing this job? When you ran it did all the axis’s move at the same time?

  • @mikewatson5281
    @mikewatson5281 2 роки тому

    i am milling a part on a 4 axis rotary using the side of an endmill, because Y isnt in use when it machines radius's it goes point to point and leaves not so good finish, is there a way to make the points closer together?

  • @jlb0077
    @jlb0077 Рік тому

    How do you get the material to rotate in simulation vs the tool moving?

  • @ehdrmfm
    @ehdrmfm 4 роки тому +1

    Hi Thank you for the video. I have a question. Is there a way to process the shape of a circle in 4 axes in modeling? (Excluding the roll function on the go menu)

    • @designinnov.engineering
      @designinnov.engineering  4 роки тому +1

      Yes, there are other process

    • @ehdrmfm
      @ehdrmfm 4 роки тому

      @@designinnov.engineering
      Thank you so much for answering. I am desperate for the process. Could you possibly upload a video?
      The model you really want is a mask roller
      Is that function parallel processing in the multi-axis menu?

    • @designinnov.engineering
      @designinnov.engineering  4 роки тому

      Ok

  • @md8744
    @md8744 3 роки тому

    So may I ask you please. Once we have model we go ahead click directly on model wire frame then ok right? Don't need to roll xform into 2D anymore!!!

  • @jerryyang2202
    @jerryyang2202 Рік тому

    Great video, one question about the creation of the 3D model for cutting, how can we draw the pocket ?, because the edge surface of the pocket is aligned to the axis center, how can we draw it? Thanks

  • @ashishdhiman7278
    @ashishdhiman7278 3 роки тому

    Great tutorial. Due to no explanation verbally about what are you doing and why are you performing this way. It become hard to understand although, we were able to get some points of your way. You did best, we the 4th axis programmer are thankful to you for this upload. Can you upload a tutorial where you can show us. How to select multiple number of pockets whether it's open or close with ramp entry?? Pockets are in zigzag way not linear pattern. And selection of those pockets must be in easy way. Like select one pocket and all the other pockets on surface also get selected at once. Best of luck buddy. You did great👍🤞

  • @cncmachinebear1636
    @cncmachinebear1636 2 роки тому

    Exelente video saludos ✌🏻

  • @AlexeyPetrov-p3n
    @AlexeyPetrov-p3n 4 роки тому

    Hello, how do I create a part outline?

  • @hamedhamedi2118
    @hamedhamedi2118 4 роки тому

    Hi.
    How au you?
    Please teach me four axis rough in powermill.
    Thank you

  • @cncandcinema4545
    @cncandcinema4545 4 роки тому

    I NEED MORE SOLIDCAM MULTIAXIS PROGRAM.

  • @arkarmyint4958
    @arkarmyint4958 2 роки тому

    Sir, can you give me a part file for mill and turn 2, 3, 4, 5, axis

  • @giribabu6458
    @giribabu6458 5 місяців тому

    Sir if you give step file. It will be helpful to practise it

  • @dhanasekare3491
    @dhanasekare3491 4 роки тому

    Sir please explain ramp milling option in angle holes or any other options in angle holes continues cut in angle holes please explain this one it's very useful for me please iam waiting for your reply

  • @vasavarajni5687
    @vasavarajni5687 Рік тому

    ye drawing banane ki command

  • @mikewatson5281
    @mikewatson5281 2 роки тому

    hard to follow this video

  • @Tuongcamcnc
    @Tuongcamcnc Рік тому

    Gà quá