Hey Ray thanks for all your help! I was able to successfully add the mods to my lambo. Even add a little touch of my own. I added flames coming out of the exhaust and a lambo symbol in the middle of the mesh cover. This looks way better than the original set thanks again!
Fantastic video and great modifications. Which leads to one question though: Why does the engine compartment not open all the way to begin with!? I am just building this model and I am shocked to see that it does not open all the way! I also have to take the car apart again (thank god not all of it) because I made a mistake with the doors! Argh, I hate that. Anyhow, cool video. Thanks for posting.
Awesome mods 👍🏻 One thing though, did you know that the rear engine cover does actually detach from the car as a big panel? I think the hinged engine cover is more practical, but it differs from the real car where TLG's design was pretty much spot on
Thanks! Yes I know the engine cover of the real car doesn't have a hinge. I just think it is a much cooler this way as a display model. Well, as the real car is highly customisable, maybe Lamborghini can make one if the buyer wants it, hahaha!
Hello Ray, I bought the lambo 2 years ago and now just getting ready to build it. I have been analyzing your video for some time now. I started ordering all parts for all 9 mods. My only question is where do you get the rechargeable small battery, on/off switch, and the USB charging circuit? Is this something that when battery life is running low, I can plug it in overnight. The next day unplug, close the bonnet, and run the light till the battery runs low again, and repeat the cycle using the on/off switch? Thank you in advance! I'm excited about this next build.
Thanks for the interest in my mod! I got the small lipo battery and the charging circuit board and switch from a local electronics shop. I have not tested but the lipo battery should be able to light up for a few hours. Then I can charge it full again.
Hi Ray! Really loved the modifications you made! Very impressive! Would really appreciate if you can send or share your part list required so we can do the same? Appreciate it! Thanks!
Thank you so much! I am new to this hobby so have not done good record of my mod work. Someone has helped to create part list for some mods. You may find it in the description of this video. Hope that helps. Let me know if you have any specific question I will try my best to help.
I love the finished model but I hated putting it together. It took 8 months because I found it extremely tedious and at times confusing with the instructions... These may make it "look better" but I ain't touching it again!
Hi. Do you have the exact parts for the hinged cover? I followed the link provided but there are lot of parts around them. I only need the hinged cover mod
Hey Ray! I have my car apart and thought why not add the springs in I was wondering if I could bother you for instructions for that mod. Thanks again for all your help!
The spring mod is not my creation. You can go to rebrickable to download jb70's instruction for free. rebrickable.com/mocs/MOC-46782/jb70/42115-pimp-up-my-lamborghini/#details
Awesome modifications I realy enjoyed to see. Modification nr 7 (lower rear clearance), is the parts in the original box, or do you need to purchase it extra?
Hi Ray hope you are well and thank you for showcasing this video. It’s a brilliant presentation of the model and mods. Wanted to ask a few detailed questions as iv started making the model and wanted to add these 9 mods you have displayed. Could you assist me in finding all parts needed I can see you have put most details in the description of the video but I’m hoping we could have a chat to confirm exactly what I need to create the mods I’m looking for. Wanted to add the following mods Extended front bonnet Lighting for headlights and rear Exhausts Rear engine cover with hinges Side mirrors extension Thank you
Thanks for your compliment! I was very new to Lego so I did not do a good job to take record of what parts I have used. The inventory shown in the video description is not complete. Please email me at leungr@mac.com for an offline discussion. I will see how I can help.
Thanks! Sorry I did not make a record of which part I have swapped out and which part has been added. I built it in a trial and error way. Please reference to the video image and if you still have question I will try to help as much as I can.
@@mgbb2005 I had a problem with the v12 before so had to restart it all from the start and now I did it all it looks really good but not all the gears work and I still have some small parts left over
Tried to follow your Mesh Engine Cover mod. Any chance you make a part list? It's the base and bricks I need to a guide to, the rest of the pieces like the slopes and meshes im okay with.
The base is 5 studs wide and 13 studs long. It is composed by a mixture of 2 x 4 plates, 2 x 3 plates, 1 x 4 plates, 2 x 1 plates and 1 x 1 plates. If you pause the video you can get a nice top and bottom view of the base. It is not difficult to figure it out. Hope this helps.
Thanks! But sorry I did not produce a tutorial or step by step instruction. I am new to this hobby. You may pause my video to look at how I did it. In case something still not clear please ask again.
@@mgbb2005 ok sounds good! I will try to do it and ask if any question. You should do a tutorial, that's the best engine cover modification I've found! Keep it up!
Thanks! I can send you the parts I used if you can let me know your email address. I will then send you the .xml file which you can upload to Bricklink.
Where can I buy these extra parts if I may ask? I don’t have any extra legos and I’d appreciate if I can buy some extra parts. Just the Engine Hinge parts.
You can buy these extra parts from Bricklink.com. Unfortunately I did not keep track of which part I removed or added. It was my first time doing the mod and a video of it so I was not well prepared. Sorry!
Почему Lego сразу так не сделали ? Я конечно не про электрику и свет , а про отделку кузова . Более широкий капот , боковые зеркала симпатичнее . В двигательном отсеке решетка правильная , а не кусок панели и крышка двигательного отсека подъёмная , а не просто отдельная сборная деталь и правильный вид выхлопных труб . За те деньги которые он стоит можно было всё это довести до такого же надлежащего исполнения . Но нет раз это конструктор то доделывай дальше сам . Иногда за lego довольно обидно особенно в таких случаях :-(
Where do you get the parts for the modified exhaust anywhere you can buy them? And can you try to show how to take off the required parts to put in the modified exhausts
I bought the extra parts from BrickLink.com. You need to strip down pretty much all external parts at the rear to leave just the frame. Then you can see how to attach the modified exhaust pipes
@@mgbb2005 the other pieces? It would help a lot and do you have a video showing how to take out the pieces on the back that are necessary to be able to put the new exhausts in.
Additional parts. In the video comment, I have listed those arm parts. But there are other parts I modified about the hinges I did not list. (I am new to this hobby so did not do a good documentation work, sorry)
Did the engine cover mod using stuff I already had. Didn't use exactly the same parts (made some substitutions) but it still worked. Thanks for the guidance.
Sorry I don't have a full part list. Please see if the information in the video description help. Otherwise you can let me know which one you are looking for.
Hinged engine cover you mean? That's tricky. I just swap parts in and out until I got it to work. I did not keep track of which part I remove or add, sorry! You can only stop the video and compare to the original.
![[RC Tutorial] LEGO Lamborghini Sian motorized 42115 람보르기니 시안 구동개조](/img/n.gif)
Hey Ray thanks for all your help! I was able to successfully add the mods to my lambo. Even add a little touch of my own.
I added flames coming out of the exhaust and a lambo symbol in the middle of the mesh cover. This looks way better than the original set thanks again!
That is awesome!
I gonna take some of modifications that are so cool.
I did the bonnet, exhaust pipes, rear clearance and side mirrors. Pretty cool, thanks
I like the exhaust pipe modification the most ;-)
Me too!
@@mgbb2005 Hi Ray. What is the part at the top right at time
@@terrywong9355 I guess you mean the Technic, Axle and Pin Connector Perpendicular Split (part# 92907)
@@mgbb2005 That's the one! Thanks!
Fantastic Lego set, fantastic chance you made! Good work!
I like the bonnet mod the most.
Great video! My Lamborghini is still in the box but i'll definitely use some of those gorgeous modifications. And refer anyone to this clip.
Thanks so much! If you have any question with the mod please let me know
Fantastic video and great modifications. Which leads to one question though: Why does the engine compartment not open all the way to begin with!? I am just building this model and I am shocked to see that it does not open all the way! I also have to take the car apart again (thank god not all of it) because I made a mistake with the doors! Argh, I hate that. Anyhow, cool video. Thanks for posting.
Good question! Maybe the real car engine bay cover opens like that so Lego modelled after the original. Thanks for liking my video!
@@mgbb2005 You know what!? You are correct! On the real Lambo the engine compartment just comes off as well. There is no "hood"! Thanks.
Awesome mods 👍🏻 One thing though, did you know that the rear engine cover does actually detach from the car as a big panel? I think the hinged engine cover is more practical, but it differs from the real car where TLG's design was pretty much spot on
Thanks! Yes I know the engine cover of the real car doesn't have a hinge. I just think it is a much cooler this way as a display model. Well, as the real car is highly customisable, maybe Lamborghini can make one if the buyer wants it, hahaha!
@@mgbb2005 Honestly the engine hinge looks really cool especially when you display it open like that. Really cool detail to have
Hello Ray, I bought the lambo 2 years ago and now just getting ready to build it. I have been analyzing your video for some time now. I started ordering all parts for all 9 mods. My only question is where do you get the rechargeable small battery, on/off switch, and the USB charging circuit? Is this something that when battery life is running low, I can plug it in overnight. The next day unplug, close the bonnet, and run the light till the battery runs low again, and repeat the cycle using the on/off switch? Thank you in advance! I'm excited about this next build.
Thanks for the interest in my mod! I got the small lipo battery and the charging circuit board and switch from a local electronics shop. I have not tested but the lipo battery should be able to light up for a few hours. Then I can charge it full again.
Amazing mods! You definitely have a great mind for it
the hood is increbile!
Awsome modifications. I like them very much.
Hi Ray! Really loved the modifications you made! Very impressive! Would really appreciate if you can send or share your part list required so we can do the same? Appreciate it! Thanks!
Thank you so much! I am new to this hobby so have not done good record of my mod work. Someone has helped to create part list for some mods. You may find it in the description of this video. Hope that helps. Let me know if you have any specific question I will try my best to help.
Printed instruction and part list are now available at rebrickable.com/mocs/MOC-113500
@4:05, how is the black 11L liftarm attached to the chassis? Underneath the wiring there seems to be a lot of non-original stuff.
Yes there are modified structure below. The details are explained in the rebrickable MOC: rebrickable.com/mocs/MOC-113500
I got it now. Thanks.
I love the finished model but I hated putting it together. It took 8 months because I found it extremely tedious and at times confusing with the instructions...
These may make it "look better" but I ain't touching it again!
Part List: 7. Lower Rear Clearance
4x 6007966
4x 6089119
8x 6279875
Part List: 9. Side Mirror Enhancement
2x 4143005
2x 6279875
2x 6121485
2x 4541191
Part List: 3. Hinged Engine Cover
4x 4164133
2x 4107828
2x 6089119
2x 4107828
1x 4142822
1x 6130010 can´t find gray
2x 6253260
2x 4140806
2x 4206482
2x 4114634
2x 4142135
4x 6013938
2x 6282140
wow, thanks so much for publishing the list! I did not get a chance to do that myself
Hi where do i order the parts from please & does this list cover all of the mod or just some..your help would be appreciated thanks Steve
Hi. Do you have the exact parts for the hinged cover? I followed the link provided but there are lot of parts around them. I only need the hinged cover mod
Have you bought the mod?
Hey Ray! I have my car apart and thought why not add the springs in I was wondering if I could bother you for instructions for that mod.
Thanks again for all your help!
The spring mod is not my creation. You can go to rebrickable to download jb70's instruction for free. rebrickable.com/mocs/MOC-46782/jb70/42115-pimp-up-my-lamborghini/#details
Awesome modifications I realy enjoyed to see. Modification nr 7 (lower rear clearance), is the parts in the original box, or do you need to purchase it extra?
Thanks! Those are extra parts purchased in addition.
Please see other comments here. Al Ex published some part lists.
@@mgbb2005 Can you copy the List from Al Ex and release it to the description? I can not see/find the List/comment from him.
@@f.g.1622 Done
Hi Ray hope you are well and thank you for showcasing this video. It’s a brilliant presentation of the model and mods.
Wanted to ask a few detailed questions as iv started making the model and wanted to add these 9 mods you have displayed.
Could you assist me in finding all parts needed I can see you have put most details in the description of the video but I’m hoping we could have a chat to confirm exactly what I need to create the mods I’m looking for.
Wanted to add the following mods
Extended front bonnet
Lighting for headlights and rear
Exhausts
Rear engine cover with hinges
Side mirrors extension
Thank you
Thanks for your compliment! I was very new to Lego so I did not do a good job to take record of what parts I have used. The inventory shown in the video description is not complete. Please email me at leungr@mac.com for an offline discussion. I will see how I can help.
Printed instruction and part list are now available at rebrickable.com/mocs/MOC-113500
Sweet video, love exhaust :)
Your mods are so inspiring!
@@mgbb2005 thank you
Awesome and for such a good vid I give u a free cookie
Yaay
Nice
Awesome modification you have done!! Could you please supply a product list for the hinged engine cover modification. Many thanks
Thanks! Sorry I did not make a record of which part I have swapped out and which part has been added. I built it in a trial and error way. Please reference to the video image and if you still have question I will try to help as much as I can.
Printed instruction and part list are now available at rebrickable.com/mocs/MOC-113500
Cool i like it😄
excellenct stuff！ do you mind sharing the list of extra parts needed for back hinge modification? Imma try that
Sorry, I have not made a list. If there is a particular part you are not sure please let me know.
Printed instruction and part list are now available at rebrickable.com/mocs/MOC-113500
Hello, can we have the part list for exhaust modification ?
Please leave me your email address I shall send it to you
@@mgbb2005 Can you just post the list here
@@mgbb2005 Me too, please
Printed instruction and part list are now available at rebrickable.com/mocs/MOC-113500
@@mgbb2005 thanks, but looking each piece I save money.
Can you show all the part list to purchase for the modifications
Sorry, I did not make record of that. You can reference to my video. But if there is any question please let me know. I will try my best to help.
Kinda wish I had a template to print out of your "Tailight Enhancement". Can't seem to cut the card right within the dimensions you mentioned =/
It doesn't have to be perfect as it is so small. My advice is to use a sharp knife.
Yo so I had this problem with my sian like the front suspension is screwed up and Is very low, any help?
Can you send me some photos? I'd suggest you check with the instruction book to see if any steps are wrong
Question, I built it but the gears only change twice. Is something wrong and can I fix it?
Probably one of the gearbox steps has done wrong. You may check carefully step by step. But it is not easy to fix if you have already gone far.
@@mgbb2005 I had a problem with the v12 before so had to restart it all from the start and now I did it all it looks really good but not all the gears work and I still have some small parts left over
Tried to follow your Mesh Engine Cover mod. Any chance you make a part list? It's the base and bricks I need to a guide to, the rest of the pieces like the slopes and meshes im okay with.
The base is 5 studs wide and 13 studs long. It is composed by a mixture of 2 x 4 plates, 2 x 3 plates, 1 x 4 plates, 2 x 1 plates and 1 x 1 plates. If you pause the video you can get a nice top and bottom view of the base. It is not difficult to figure it out. Hope this helps.
@@mgbb2005 Appreciate the reply. Yea Ive been pausing it at highest resolution. Just wanted to be precise =) Thanks again
Hi there! Amazing video! Would you have the link to the tutorial of the hinged engine cover? Thanks!
Thanks! But sorry I did not produce a tutorial or step by step instruction. I am new to this hobby. You may pause my video to look at how I did it. In case something still not clear please ask again.
@@mgbb2005 ok sounds good! I will try to do it and ask if any question. You should do a tutorial, that's the best engine cover modification I've found! Keep it up!
Thanks for the kind comments!
Printed instruction and part list are now available at rebrickable.com/mocs/MOC-113500
♥️
Where can i but extra lego parts from?
You may buy the extra parts from Bricklink.com
Awesome mods Ray! Could you use different bricks than anstyanax for the exaust pipe ? You could send me the list for the exaust mod please ?😭
Thanks! I can send you the parts I used if you can let me know your email address. I will then send you the .xml file which you can upload to Bricklink.
@@mgbb2005 hi Ray... I tried to post an email but the post is eliminated. Sorry, but I am a noob 😂. how I could send you an email 😅?
Pls send an email to me at leungr @ mac.com of course this is one word
Printed instruction and part list are now available at rebrickable.com/mocs/MOC-113500
Where can I buy these extra parts if I may ask? I don’t have any extra legos and I’d appreciate if I can buy some extra parts. Just the Engine Hinge parts.
You can buy these extra parts from Bricklink.com. Unfortunately I did not keep track of which part I removed or added. It was my first time doing the mod and a video of it so I was not well prepared. Sorry!
Printed instruction and part list are now available at rebrickable.com/mocs/MOC-113500
@@mgbb2005 thanks!
Bonjour
Votre modification est exceptionnelle
Avez vous une liste des pièces et un tutoriel pour les installer moyennant finance
Merci d'avance
Some parts are listed in the comment of the video. I do not have a tutorial but I am quite happy to answer if you have any question
Printed instruction and part list are now available at rebrickable.com/mocs/MOC-113500
Hi Ray- Where did you purchase the extra parts for the mods?
You can try BrickLink.com
Awesome.
I like the mods. But could you slow down the recording. You are making the videos too fast so it is hard to tell where everything goes.
Thanks! I will work out some instruction PDF to be shared
Printed instruction and part list are now available at rebrickable.com/mocs/MOC-113500
Can you tell me the parts I need for the hinged engine cover?
Your video is great!!
Thanks! I am preparing the list and building instruction. That will take some time. I will share when ready
@@mgbb2005 thank you!! :)
I was wondering if you can help me with the parts for mesh cover and exhaust as well?
I can send you some money for your time.
Thanks!
Bryan, it is ready now at rebrickable.com/mocs/MOC-113500. Pls go and check
Thank you!! Your the man!!
I did the side mirrors now to order all parts and begin!!
好正喎
Hey can you link the lights lived those!
There you go: www.lightmybricks.com/products/lego-lamborghini-sian-fkp-37-42115-light-kit
Почему Lego сразу так не сделали ? Я конечно не про электрику и свет , а про отделку кузова . Более широкий капот , боковые зеркала симпатичнее . В двигательном отсеке решетка правильная , а не кусок панели и крышка двигательного отсека подъёмная , а не просто отдельная сборная деталь и правильный вид выхлопных труб . За те деньги которые он стоит можно было всё это довести до такого же надлежащего исполнения . Но нет раз это конструктор то доделывай дальше сам . Иногда за lego довольно обидно особенно в таких случаях :-(
Hello 想問個排氣零件 香港邊到買🙇🏽♂️
旺角 現時點二樓可能有
改裝既Lego 全部都系唔屬於林寶入邊？
@@simoncheung9068 correct
支持小弟, 可以到此購買優化説明書 rebrickable.com/mocs/MOC-113500
how to make the hinged engine cover? can I have a link to a tutorial or something?
Sorry I don't have tutorial or something. Everything I did was with the video. You may pause it to take a good look. Any question please let me know
Printed instruction and part list are now available at rebrickable.com/mocs/MOC-113500
Tnx man
Where do you get the parts for the modified exhaust anywhere you can buy them? And can you try to show how to take off the required parts to put in the modified exhausts
I bought the extra parts from BrickLink.com. You need to strip down pretty much all external parts at the rear to leave just the frame. Then you can see how to attach the modified exhaust pipes
@@mgbb2005 what is that black triangle panel called?
#3299 Slope 33 2x4 Double
@@mgbb2005 the other pieces? It would help a lot and do you have a video showing how to take out the pieces on the back that are necessary to be able to put the new exhausts in.
@@gabecollins5585 let me know your email address so I can send you the names of the other parts
i have a question:
the additional parts for the engine cover lift, are they coming with the set or separately?
Additional parts. In the video comment, I have listed those arm parts. But there are other parts I modified about the hinges I did not list. (I am new to this hobby so did not do a good documentation work, sorry)
Did the engine cover mod using stuff I already had. Didn't use exactly the same parts (made some substitutions) but it still worked. Thanks for the guidance.
I used some existing parts and some additional parts. Let me know if you have any question
Printed instruction and part list are now available at rebrickable.com/mocs/MOC-113500
Im so imprest
could i have the parts list for 2:41 - 2:48 ? or are they included in the set
Some are extra parts. Please refer to Part List in the video description. It was kindly made by a youtube member.
Printed instruction and part list are now available at rebrickable.com/mocs/MOC-113500
Could we have the list of parts please, tried looking in the video, does anyone sells it as a pack??
Sorry I don't have a full part list. Please see if the information in the video description help. Otherwise you can let me know which one you are looking for.
@@mgbb2005 hey Ray great video, I'm after the tailgate replacement parts
Thanks! Tailgate? Which min/sec of the video?
@@mgbb2005 2.23 the tailgate
Hinged engine cover you mean? That's tricky. I just swap parts in and out until I got it to work. I did not keep track of which part I remove or add, sorry! You can only stop the video and compare to the original.
Hi I would like to know the code number of the two cones to the left of the photo. Thank you
May I know which photo are you referring to?
@@mgbb2005 At minute 4.21where you can see the two round cylinders
The part number is 2489, Container, Barrel 2 x 2 x 2
The other one is 3941, Brick, Round 2 x 2 with Axle Hole
@@mgbb2005 Thank you
where are the instructions
@@ThatLittleNooby please check the video description
Do I have to buy the pieces
Yes you need to get extra pieces. Pls refer to video description
I did a spring engine cover
Great! Would be nice if you could show how yours works
@@mgbb2005 可唔可以用Gmail? 冇UA-cam channel
@@justinjonpoon4716 ok
Nice video. :). Can i ask for the parts list.
You can find some of the parts list in the video description. It is not a complete list. If you have further question please let me know
@@mgbb2005 thank you.
Printed instruction and part list are now available at rebrickable.com/mocs/MOC-113500
Pls do one for the Bugatti set!!
I don't have a Bugatti unfortunately. Not a huge fan of that set.
@@mgbb2005 that's a bummer! I'm on the other side of the coin, not a huge fan of the Lamborghini set, but crazy for the Bugatti one
It's a great set just not my cup of tea. I have the Porsche GT3 too and like it a lot
@@mgbb2005 whats exactly what you don't like from the Chiron? Genuinely curious
Blue color
I dont find the instrutions
Which mod do you need help?
Modi 8 spring door
ill just keep it original
original is already quite nice
How much Usd
Not sure what you refer to. Do you mean how much I spent on getting the extra parts for the mods? I have no idea.
@@mgbb2005 Hi Ray. What is the part at the top right @ time 4:18 for the exhaust?
Printed instruction and part list are now available at rebrickable.com/mocs/MOC-113500
4:23