Autel MaxiScope MP408 Unboxing and Installation

Поділитися
Вставка
  • Опубліковано 31 січ 2020
  • Picked up an Autel MaxiScope MP408 Automotive Oscilloscope! In this video we unbox it and install the software on our Windows 10 PC. Check it out!
    Following up on the initial diagnosis and repair that we made to the 2005 Mazda 6 Radiator Cooling Fan Control Module. Using the Autel MP408 scope and OBDWiz to monitor the fan duty cycle, we can confirm that the correct repair was made.
    ACH Automotive Playlist - • How To Obtain A Massac...
    Automotive Diagnostics Playlist - • Mazda 6 - Cooling Fan ...
    Mazda Repairs Playlist - • Almost Scrapped! We Go...
    Jeep Cherokee Repairs Playlist - • Jeep Cherokee Blowing ...
    ACH Automotive Amazon Store: amzn.to/2WHgvUV
    Follow along on Social Media for more behind the scenes!
    / achautomotive
    / achautomotive
    / achautomotive
    #autel #automotivediagnostics #achautomotive Disclaimer:
    Due to factors beyond the control of ACH Automotive, I cannot guarantee against improper use or unauthorized modifications of this information. ACH Automotive assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ACH Automotive recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ACH Automotive, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ACH Automotive.
  • Авто та транспорт

КОМЕНТАРІ • 49

  • @ACHAutomotive
    @ACHAutomotive  4 роки тому +4

    Autel MaxiScope MP408 Automotive Oscilloscope: amzn.to/3aYYJmJ

  • @breagles77
    @breagles77 4 роки тому +2

    Nice video. I just ordered mine. Still learning also. Following your page.

    • @ACHAutomotive
      @ACHAutomotive  4 роки тому

      It's been a learning curve for me. Thankfully I do have my dad to bounce issues off of (electronic tech for many many years and auto mechanic prior to that so grew up around both)

  • @anthonythompson5474
    @anthonythompson5474 3 роки тому +1

    Thank for the video because I was looking for a good scope I already have the Autel maxi systems

  • @letitgrowdad5268
    @letitgrowdad5268 2 роки тому

    As a tech , you can’t do anything but guess work unless you have an oscilloscope 👍 ( garbage in - garbage out ) 👍👍 great video man keep it up!

  • @markdasparkauto1780
    @markdasparkauto1780 4 роки тому +2

    I have a autel elite with the mp408 scope and I've been using it for over year and it have been very good but practice is the key to master it .

    • @ACHAutomotive
      @ACHAutomotive  4 роки тому

      I have a lot to practice! I think in retrospect that getting something like this vs a picoscope to start out with will be good because it will force you to learn how to use the scope vs the built in tests the Pico has.

    • @weldingjunkie
      @weldingjunkie 4 роки тому

      ACH Automotive actually this has 90% of what the pico 4425 does. Filtering, custom probes, math channel, much much more. Just like Pico

  • @carltonlane8931
    @carltonlane8931 4 роки тому +1

    If you are learning So am I,I also have the 908 tablet as well,but I’m thinking I’m going to run a laptop on the 408 ,just to make. The scope simpler to follow,understand.good video,well done.

    • @ACHAutomotive
      @ACHAutomotive  4 роки тому +1

      Unfortunately I don't have their tablet yet, but I've found my Surface Pro or my laptop work fairly well with the scope. I still have a lot of learning to do on it.

  • @partsshooter
    @partsshooter 4 роки тому +2

    When you have issues with your BNC CABLE shorting out, I found the fix, literally just uploaded today. Because I can promise you it will happen!
    Good video!

    • @ACHAutomotive
      @ACHAutomotive  4 роки тому +2

      customhonda that’s awesome! I’ll give it a watch. I haven’t had that issue yet but I really just started so good to know!

  • @carltonlane8931
    @carltonlane8931 4 роки тому +2

    Just to put my view, my ms908s is very go,but remember 1 scanner will not do all things ,and some do things better than others,but the Autel is priced well for its abilities,and DON,T fire the parts cannon until you prove that part is at fault,POWERS AND GROUNDS.just my view,enjoy the learning curve,it’s fantastic.

    • @ACHAutomotive
      @ACHAutomotive  4 роки тому

      Thanks! I've learned a lot, have way more to go though.

  • @robertfrancisco1193
    @robertfrancisco1193 2 роки тому

    will the maxi scope work with autel ms906 BT scan tool

  • @derekdlick2516
    @derekdlick2516 3 роки тому

    What software are you using for your screen recorder

  • @gavin1215
    @gavin1215 2 роки тому

    After a year, how has it been?

  • @Khaled-if4xs
    @Khaled-if4xs 2 роки тому

    Compression can be tested by it?

  • @weshawkins7165
    @weshawkins7165 2 роки тому

    I’ve heard the leads that come with the Autel are not that good and some techs say to up grade to better leads but don’t say where to purchase them.

  • @kevincampbell8298
    @kevincampbell8298 4 роки тому +1

    InterestingI just bought one. Didn’t come with a hard case.

  • @vegacarify
    @vegacarify 2 роки тому +1

    tal como lo menciono exelente 👋

  • @JNaimoli
    @JNaimoli 4 роки тому +1

    Lol whats the chances on looking for an Autel scope video and finding a 2 hour old video!!! Thanks Bro

    • @ACHAutomotive
      @ACHAutomotive  4 роки тому

      Jman26063 no problem! Glad I could help!

  • @Joe_1971
    @Joe_1971 4 роки тому +1

    How is this scope? I have an Maxisys 906bt on order and am looking at some scopes. How does this compare to the micsig or the carscope viso? I know it's cheaper price wise than the micsig and the carscope viso.

    • @ACHAutomotive
      @ACHAutomotive  4 роки тому +1

      I'm not familiar enough with the two scopes you mentioned. I have gotten more comfortable with the scope, although I do not see the volume of cars that others do so it's not a tool I get to use often. I have found there is waaaaay more information out there on how to use scopes like the PicoScope. The PicoScope I believe has specific settings for testing various things and this does not. I find that good and bad. It forces you to learn the scope. The unit itself has been relatively easy to use. Well built. Software seems a little...buggy? at times but otherwise not bad for the money. If I had the funds I would of picked up a PicoScope.

  • @henryrobinson9837
    @henryrobinson9837 4 роки тому

    does the scope have any low pass filtering?

    • @ACHAutomotive
      @ACHAutomotive  4 роки тому +1

      +henry robinson that’s a great question I am not sure I will have to look into it

    • @raquelsadler9782
      @raquelsadler9782 4 роки тому

      yes it does have low pass filters

  • @dancujo3247
    @dancujo3247 4 роки тому +2

    Regarding your link to the Autel MP408 , Does the price includes the case ?
    Waiting for your respond before l use your link.

    • @ACHAutomotive
      @ACHAutomotive  4 роки тому

      Yes mine came with the case and all the basic accessories

    • @dancujo3247
      @dancujo3247 4 роки тому +1

      Thank you for the immediate response. Had wanted to call them to make sure before ordering but couldn't find their number on Google. Can you please give me their number if you have it ?

    • @ACHAutomotive
      @ACHAutomotive  4 роки тому

      dan cujo I will take a look on the box and see if there is a number

    • @dancujo3247
      @dancujo3247 4 роки тому

      @@ACHAutomotive Thank you. Be waiting for you.

    • @ACHAutomotive
      @ACHAutomotive  4 роки тому

      @@dancujo3247 So the number on the box is their international number in China I believe. It's 86-755-86147779 - They also list the email: sales@autel.com

  • @markhb3346
    @markhb3346 2 роки тому

    A year later how’s it holding up ?

    • @ACHAutomotive
      @ACHAutomotive  Рік тому

      I use it sparingly as I am mostly just a hobbyist, it works for what I need it for. Hoping someday to get a Pico

  • @jeffreyhowarth7850
    @jeffreyhowarth7850 3 роки тому

    5 volt USB powers the Autel MaxiScope?

    • @ACHAutomotive
      @ACHAutomotive  Рік тому

      Yes. Standard USB port powers it up. I use it with my Surface.

  • @moavic5087
    @moavic5087 4 роки тому +1

    How is it with a laptop???

    • @ACHAutomotive
      @ACHAutomotive  4 роки тому

      It's not too bad. I use it with my Surface Pro, which is a tablet. I'm sure it would work fine on a laptop, but you'd lose the touch screen zoom capabilities.

    • @aceg8458
      @aceg8458 4 роки тому

      If your wanting to do critical measurements it’s best to use with a laptop. IMO this a great scope especially for the money. It lacks in some of the software areas: grabbing rulers, creating math channels, and test leads are known for reliability issues. It’s all there just needs refining from Autel. Definitely NOT disappointed with mine. Would’ve been nice to have different color leads and/or to be able to change the color of the traces / channels.

  • @abubakarisadiqueibrahim481
    @abubakarisadiqueibrahim481 4 роки тому

    Hello i did checked but didn't get the price.

  • @weldingjunkie
    @weldingjunkie 4 роки тому +1

    Don’t go for the elite get the Autel IM608 I did some videos on it. I sold my elite and bought the 608 it’s an absolute beast! Check out my FB Page Automotive Scan Tools

    • @ACHAutomotive
      @ACHAutomotive  4 роки тому

      Thanks for the info! I will certainly check your page out.

  • @quinnhall24
    @quinnhall24 2 роки тому

    I thought you were actually going to put on a vehicle

    • @ACHAutomotive
      @ACHAutomotive  2 роки тому

      The title is literally unboxing and installation… if you’re curious to see it in action you can look at my latest upload on my Mazda 6 and troubleshooting p2503.

    • @quinnhall24
      @quinnhall24 2 роки тому

      My bad . The installation got me