Hi nice work you did to the rg sazabi clear color. Its so gorgeous that it looked like the recent release rg sazabi mechanical core. Btw i have a question, do you think this technique in polishing is possible to Mg Dynames Transam. Hope you can read this message.
Very nice and I think your solution for hiding the battery and the on/off switch is very elegant. Shame the Mega Particle Cannon in the waist doesn't light up tho.
Thank you for your question. I think you can give it a clear coat, but I think you'll need to polish it again after that. The process is the same as that of a plastic model car.
hello again. awesome masterpiece. i just noticed after painting, the assembly is smooth and doesnt have any fitting issues. i would like to ask if you also top coated your inner frame with gx100? for how many coats? edit: also if i will put waterslide decals is this the correct process? sandponge>compound>water decals>>top coat gloss>compound finish? thanks.
Thank you for your question. I lightly sprayed the inner frame with top coat gx100 once. (When pasting water slide decals) For painted surfaces →Painting→Water slide decal→Top coat→Sand sponge→Compound For clear parts → Sand sponge → Compound → Water slide decal → Top coat → Sand sponge → Compound This time, I am applying the water slide decal to the inner frame, but after spraying the top coat, I have not sand sponged or compounded it. In order to express the beauty of the exterior parts, only the exterior parts are polished with a compound. (I use Google Translate)
@@niship wow. thanks for this info. i would like to try that process. i was amazed completely about how clean the inner frame is and the clear parts are showing the inner frame beutifuly. i think if i try this process, i could unlock another skill. thanks for sharing. would like to watch more of your videos in the future.
@@nishiphello again this is my current wip 🙏 i just to ask, do you also thin your enamel paints for detailing or directly from the bottle? also the metallic duralum is it also 1:2 paint to thinner ratio and sticks on surface without primer? thanks
Thank you for your question. I bought this from Amazon Japan. At first, I bought a cheap one and tried it. Also, this is a rechargeable type, but when polishing, we recommend a power cord type.
Awesome work! BTW I notice you stopped at #4000 for these clear red parts while for clear white parts in Nu Gundam you went all the way to #10,000. Is it because of the color?
Thank you for your question. I will try it to save time. I don't think it will make much of a difference, but maybe a professional will see a difference.
![Gundam Model GUNPLA/ I polished RG 1/144 ZEONG [CLEAR COLOR]](http://i.ytimg.com/vi/gsjJSya_6aE/mqdefault.jpg)
![Gundam Model GUNPLA/ I polished RG 1/144 ZEONG [CLEAR COLOR]](/img/tr.png)
![GUNPLA/ I polished MG HYAKU-SHIKI Ver.2.0 [MECHANICAL CLEAR]](/img/n.gif)
電飾の魔術師✨素晴らしいの一言です✨
Stunning, beautiful work.
Dude!! Im lost for words. This is breathtaking!!
ニシピー様
ガンプラいつも楽しみに❤拝見しております
Hi nice work you did to the rg sazabi clear color. Its so gorgeous that it looked like the recent release rg sazabi mechanical core.
Btw i have a question, do you think this technique in polishing is possible to Mg Dynames Transam. Hope you can read this message.
Wonderfull work...👏🏻👏🏻👏🏻
You have perfected the art of clear kit.
Very nice and I think your solution for hiding the battery and the on/off switch is very elegant. Shame the Mega Particle Cannon in the waist doesn't light up tho.
That is nice work! I Subscribed you! I have question, possible use clear coating?
Thank you for your question.
I think you can give it a clear coat, but I think you'll need to polish it again after that. The process is the same as that of a plastic model car.
素晴らしい！！！！美しい！
制作技術、アイデアは勿論の事素晴らしいですが。映像の内容、編集、撮影、ライティング、BGM…もセンスが素敵です。
実物で見たらもっと凄さや拘りが分かるんだろうなぁ。
A complete triumph!
もうルビーの輝きですね
hello again. awesome masterpiece.
i just noticed after painting, the assembly is smooth and doesnt have any fitting issues.
i would like to ask if you also top coated your inner frame with gx100? for how many coats?
edit:
also if i will put waterslide decals is this the correct process?
sandponge>compound>water decals>>top coat gloss>compound finish?
thanks.
Thank you for your question.
I lightly sprayed the inner frame with top coat gx100 once.
(When pasting water slide decals)
For painted surfaces
→Painting→Water slide decal→Top coat→Sand sponge→Compound
For clear parts
→ Sand sponge → Compound → Water slide decal → Top coat → Sand sponge → Compound
This time, I am applying the water slide decal to the inner frame, but after spraying the top coat, I have not sand sponged or compounded it. In order to express the beauty of the exterior parts, only the exterior parts are polished with a compound.
(I use Google Translate)
@@niship wow. thanks for this info. i would like to try that process. i was amazed completely about how clean the inner frame is and the clear parts are showing the inner frame beutifuly.
i think if i try this process, i could unlock another skill.
thanks for sharing. would like to watch more of your videos in the future.
@@nishiphello again this is my current wip 🙏 i just to ask, do you also thin your enamel paints for detailing or directly from the bottle?
also the metallic duralum is it also 1:2 paint to thinner ratio and sticks on surface without primer?
thanks
Question, for the clear part polish do you also polish the inner side too or just the outer side?
Thank you for your question. I only polish the outside of the parts.
@@niship Neat! all i need now is the dremel and polish bit
4:41 what was the spray used here? does anyone know?
Thanks for watching my video! That's just water.
@@niship oh thank you for replying!
きらきら✨✨
Can you do a SMD light tutorial please! Like how to connect wires to a switch, types of LED lights.
HI could you share what is that blue polishing tool you are using at 4:38 ? cant seem to find it online. Thanks
Thank you for your question.
The tool I use is Yanase Co., Ltd.'s router MINIKONG NEXT.
やっぱりクリアは内部フレームが見えると良いですよね👌
a new great channel
What type of polishing machine do you use? I want to buy one but there are too many options.
Thank you
Thank you for your question.
I bought this from Amazon Japan.
At first, I bought a cheap one and tried it.
Also, this is a rechargeable type, but when polishing, we recommend a power cord type.
いつも素敵なピカピカな研ぎ出しテクニックを見させて頂いております。
研ぎ出しの際、ヤスリ掛けは、何番まで行ってますか？
自分も一度挑戦してみようと思ってます。
とりあえず1500番→2000番→4000番までヤスリ掛けして、コンパウンド（細目）→（仕上げ目）です。もっと細かくやったら、もっと綺麗になるかもですね。
キレイ…。
By the way I really love your work!
So cool
Awesome work! BTW I notice you stopped at #4000 for these clear red parts while for clear white parts in Nu Gundam you went all the way to #10,000. Is it because of the color?
Thank you for your question.
I will try it to save time.
I don't think it will make much of a difference, but maybe a professional will see a difference.
Masterpiece
リューターでコンパウンド研磨をすると、コンパウンドが跳ねてしまい上手く研磨が行えないのですが、どの様な工夫をされているのでしょうか？使用されているビットも気になります。
ご質問ありがとうございます。
確かにコンパウンド跳ねてしまいますよね。回転を遅くすればいいのでしょうが、僕の持っているリューターは3段階しかスピード調整できないので、一番遅くしても跳ねてしまいます。これは仕方ないので、そのままやっています。ちなみに使っているバフはAmazonで購入した「JINTONG リューターバフ 2.35mm軸 20個入り」です。
@@niship 回答ありがとうございます！
跳ねても気にせず磨き続ける事を意識してやってみます！
你做了一個藝術品
百式最高😊