SMART FORFOUR GEARBOX REMOVAL AND CLUTCH REPLACEMENT

Поділитися
Вставка
  • Опубліковано 8 вер 2024
  • Hi guys,
    This video covers how to remove a gearbox and clutch on a SMART FORFOUR.
    Torque settings may vary for each vehicle so I advise you double check torque settings.
    I hope this video helps
    Please consider liking the video, subscribing to the channel and leaving any comments below
    Music: Another time
    Musician: LiQWYD

КОМЕНТАРІ • 18

  • @expocon1
    @expocon1 2 роки тому +1

    Thanks very much ,only at this video I had find out where the clutch actuator is located on 2016 models...

  • @paulregep
    @paulregep 3 місяці тому

    Hello, if you are willing to answer my question. Can i reseal the timing cover without removing the whole engine? The guy from whom i bought the car did the timing chain (1l petrol) and the timing cover is leaking a ton becuase he did a poor job sealing it. Many thanks!

    • @greasemonkey6159
      @greasemonkey6159  3 місяці тому +1

      My honest answer is I don’t know. As I haven’t done that job before. Sorry I couldn’t help

  • @DC5LS
    @DC5LS 2 роки тому +1

    Which type of oil did you refill the transmission with? I’m trying to change it in my 2016 for two automatic. Dealer states good for the life of the transmission but I know that means until the transmission breaks. Thank you.

    • @greasemonkey6159
      @greasemonkey6159  2 роки тому

      The oil for an automatic gearbox may be different, it’s probably worth asking the dealer what specification the oil would be even if you buy it from a parts store

  • @SynexBB
    @SynexBB Рік тому +1

    How did you get the control arms to line back up? Ive tried everything to no avail

    • @greasemonkey6159
      @greasemonkey6159  Рік тому

      I did have to use a ratchet strap on one side but the one I did wasn’t too bad

  • @mphomotloutsi3873
    @mphomotloutsi3873 Рік тому +1

    My gears won't select on some occasions, what could be the problem, I drive 2017 forfour?

    • @greasemonkey6159
      @greasemonkey6159  Рік тому +1

      Could be multiple things, like clutch, release bearing, slave cylinder, clutch master cylinder

    • @mphomotloutsi3873
      @mphomotloutsi3873 Рік тому

      @@greasemonkey6159 thanks for your feedback, what also happened was the clutch peddle didn't rise up, after letting it sit for a while it rose up again and it was stiff,
      I hope these repairs don't cost a small fortune
      Thanks again🤙

  • @sharjeelyaseen8042
    @sharjeelyaseen8042 Рік тому +1

    Hey I need gearbox moter where to buy it which platform?

    • @greasemonkey6159
      @greasemonkey6159  Рік тому

      You can find gearbox’s at scrap yards or online for example eBay

  • @stephenmiddleditch5278
    @stephenmiddleditch5278 10 місяців тому +1

    how did you bleed the clutch????

    • @greasemonkey6159
      @greasemonkey6159  10 місяців тому

      There is a bleed nipple on the clutch feed line near the gearbox and I got someone to pump the clutch to bleed it

    • @domniccamelo8280
      @domniccamelo8280 5 місяців тому

      @@greasemonkey6159 can you please explain properly

  • @tongsun3136
    @tongsun3136 2 роки тому +1

    hi how long it will take to remove?

    • @greasemonkey6159
      @greasemonkey6159  2 роки тому

      Hey, I got the box out within a couple hours. Hope the video helps