Step-by-Step Guide: Setting Up Your Daly BMS with LiFePO4 Oz
Вставка
- Опубліковано 27 січ 2024
- 🔧 Complete Guide to Setting Up Your Daly BMS by LiFePO4 Oz
Join Ernest from LiFePO4 Oz in this detailed tutorial on setting up a Daly BMS. Ideal for both DIY enthusiasts and professionals, this guide simplifies the setup process, ensuring efficiency and accuracy.
🔗 Shop Daly BMS Systems:
lifepo4oz.com/collections/bat...
LiFePO4 Battery Kits:
12V Kits: lifepo4oz.com/collections/lif...
24V Kits: lifepo4oz.com/collections/lif...
36V Kits: lifepo4oz.com/collections/lif...
48V Kits: lifepo4oz.com/collections/lif...
What you'll learn in this video:
How to properly connect the Bluetooth dongle to the Smart BMS app.
Effective troubleshooting for common setup challenges.
Customizing protection parameters for optimal battery management.
Setting accurate voltages and capacities for your specific battery setup.
Why Choose LiFePO4 Oz?
LiFePO4 Oz stands for quality and expertise. Our selection of Daly BMS systems and LiFePO4 battery kits are crafted for reliability and performance.
Need Further Assistance?
Encounter an issue or have a question? Reach out to our dedicated team through chat, email, or phone for expert assistance.
Safety First:
Prioritize safety when handling battery management systems. Please consult our product safety guidelines for a secure and effective setup.
THANK YOU!! Great video to help me resolve a problem I could not get vendors to help me with.
Thnx very much 👍
thank you !!!!
Finally !! Thanks for making this videos!!
You should do the sound again without you turning away from the mic.
I made a dumb blunder. I didnt follow this part of the instructions. As a result the system "thought" the capacity of the pile was 30 amp hour not 280 Ah ... I thought this would be calbrated byt the BMS .. I was wrong .... RTFM ... rookie mistake ...
Al fixed now nd it seems to be working great .... on it's first cycle and so far Very Happy ..
I have an APC 3000va UPS. I purchased a Daly brand, 15s 150 amp Smart BMS and created a 48-volt LifePo4 battery pack. However, I'm encountering an issue. Normally, the BMS's B- should be connected to the battery, and the P- should be connected to the UPS. But when connected this way, if the city power is cut, the device automatically shuts down. After it shuts down, if I press the button, it turns back on and continues to operate on battery mode. If the power is cut again, the UPS shuts down once more. There's no problem with charging the batteries when the city power is available.
When I connect the B- to the UPS and the P- to the battery, as long as the battery is charged, it automatically switches to the battery when the city power goes out. However, in this setup, it does not charge the batteries and even discharges them while the grid is active. So, the UPS is functioning correctly, but it does not charge the batteries.
Additionally, there's another odd thing. If I use another BMS from Daly that is not a Smart model, I encounter the same problem; however, if I reverse the connections-connecting B- to the UPS and P- to the battery-the system operates normally and charges the batteries.
Can someone please help about this problem
Thank you very much for the video... I want to Ask you i have a Daly bms how big and all that is not necessary just it's Li4po 170 amp and 24 volt how Meny volt to charge them whit it it 29.2 volt or??? Best regards David
Great Video, Have you used the CAN communications before?
I've connected via the CAN communication to their Daly PC APP...that's it.
@@lifepo4oz673 think I'll use uart to a microprocessor and then select the information to put on campus with that
Thanks for this video. I have the smart 100A BMS and 5A active balancer (Not smart) Did you manage to upgrade the BMS firmware? It asks you for a secure firmware code. Any idea if this is possible?
I've updated the Daly BMS fireware before you can see here: ua-cam.com/video/h1NoQ0IrJIo/v-deo.html
@@lifepo4oz673 That's very nice and helpful of you. Many thanks!
Can the Daly BMS be purchased as say a 16s and configured as an 8s to allow for system expansion?
Hi, unfortunately not. The 16S Daly can only run in a 16S configuration.
I have 2 bms 150 amp model set up in 12 volt paralell system. Do I have to setup each bms with the same parameters? or, just set up one?
Yes you'll need to update the settings on both of your BMS's. In addtion to that, Daly says if your going to run 2x Daly BMS in parallel you should also use their Parallel module, that said the parallel module will only connect with specific BMS. Check on the side of your bms to see if it has a "Parallel" port.
I cant seem to get the balancer to balance. I am in the parameters. Do you know what is the trigger to balance? Does it need to be charging to balance ? does it have an auto balance or is my bms not working properly? Thanks
If I do not have the active balancer unit do I need to lower the passive balance current? It is set to 1 A now.
The Daly BMS doesn't have an Active Balancer built in, it has a passive balancer. To see the difference see this video: ua-cam.com/video/dIuiy11-KWA/v-deo.htmlsi=RknUmvjP4NVqd6hh
My other question is: the generic 123456 password does not work for one of the 2 bms that I ordered.
How do I fix that?
You'll need to contact Daly and they'll be able to help you with the password.
pleeaase upgrade your audio