Oh brother, thankyou! I am using a Daly Smart 48V 250A 16s, with 304 AH cells. I just dint know what to do with P-. 😂😂😂 Then when I sat down, tried to calm down 😅, watched your video....the lightbulb went on, pardon the pun. Okay, now I am clear, P- , is just that...its the negative. Oh my the relief you have provided me!
Thank you so much Esa. I really appreciate it. I hope it brings some value to viewers. Thank you for watching and for your support. Please consider subscribing if you found the content useful. Thank you.
I'm only like10 minutes into this video and I can already confirm that this is the most helpful video I've found when connecting an 8s battery. Thank you! I feel that a lot of video creators skip over the "basic" stuff because they don't remember that they didn't understand it at one point. As someone who is doing this for the first time, it is very helpful.
He did it wrong! Don't plug the BMS plug in with the leads connected to the battery.... Plug the leads into the BMS, then attach each of the seven leads, one at a time to the battery - starting with the black and ending with the red. If they're already connected to the battery when the plug is connected, damage will occur to the BMS if the contacts don't make connection at exactly the same time and sequence.
Thank you sir. I appreciate the encouragement. Thank you for watching and for your support. Please consider subscribing if you found the content useful. Thank you.
Would have been more beneficial to have seen how you connected the black cable on your bms. Over all it was an informative video. Thank you for producing it.
Hi. Thank you for watching and for your support. Please consider subscribing if you found the content useful. Thank you. Let me know how your off grid setup goes.
@@thinkfreelivefree6951 After using your assembly video as a guide, my 200ah 24v LiFePo4 is doing great! Using an Epever 4215BN and a 4000w Giandel inverter. Lots of power for my little trailer for now :) Thanks again TFLF
Thanks for the video. My cells are in transit with a delivery date of this coming Tuesday. I ordered [16] 3.2V 280ah Prismatic cells off Alibaba. They are shipping from a warehouse in Tx so I'm getting them a week after I ordered them for $150 each. So, for approx $2,600 I'll have a 13.4kwh battery bank. I still have to get a BMS. After watching your video I'm feeling better about setting them up.
Hi Doug, thank you so much for watching and for your support. That is very exciting about your cells arriving so fast. I had to wait almost 2 months for mine. Let me know if you have any questions during your setup. I will be happy to try to answer and if I don't know I can help research for a solution. Please consider subscribing if you found the content useful it really helps the channel grow. Thank you for sharing with all of us.
Very impressive video. I ordered a new 280A 3.2 LiFePO4 today for $212 from Ebay as a backup for my 16 battery 24v system. My BMS on the 2nd battery pack always showed one battery low. I checked the voltage today and it was 2.0V. I pulled that battery out and running it on a balancer (all day so far). I pulled another battery to connect it together to balance it faster; the connecting bar got pretty hot for 10 mins. I think the battery is not broken, just needed additional balancing. Your video helped me on how to connect my 200A 8S BMS to this number 2 battery pack. Installing the BMS as a leg on the negative side!
Hi Linda Foxwood. Thank you for watching and for your support. I appreciate your kind words, thanks. Glad the video was able to help. Good luck with your setup. Please consider subscribing if you found the content useful. Thanks.
Pretty useful info on this video of hooking these 310 AH high capacity cells correctly to ensure a safe way to charge them with a DALY BMS . This is a great video .
I am using 310 amp hour cells in my bus build. I got them from LItokala and it took about 7 weeks to get. I got 16 cells in a 2p8s configuration. I went with an ANT BMS as it has functional cold temperature cutoff where all the Daly ones that say they have it that I've seen tested [Will Prowse's channel] don't seem to actually shot off below freezing.
Nice man and good luck with your battery build. Its very exciting to make your own power. Thank you for watching and for your support. Please consider subscribing if you found the content useful. Thank you.
Thanks for the video-nice. I'm in the same process of making battery. I ordered 8 - 280ah cells but I will be using the Electrodacus bms. This will also be used in my van camper. Waiting on cells!
Hi Greg. Thank you for watching and for your support. Its very much appreciated. That is awesome that you are doing a camper van. The hardest part was waiting for the cells, 😁. Mine took over 2 months to arrive. Good luck and let me know if you have any suggestions. Take care.
@@shane6574 Hi. I did not have any additional charges on my batteries, import tax and any other fees is negotiated when placing your order with the vendor. I hope this helps. Please consider subscribing if you found the content useful. Thanks for watching.
Thank you very much for watching and for your support. Those Eve cells are amazing. Good luck with your build. Please consider subscribing if you found the content useful. Thank you.
Hi Ahmed. Thank you for watching and for your support. Please consider subscribing if you found the content useful. It really helps the channel grow. Thanks.
Thank you Pierre. That sounds like an awesome setup with a lot of storage capacity, almost 15 kilowatt hours. Thank you for watching and for your support. Please consider subscribing if you found the content useful. Thanks. Good luck with your build. Let me know how its going.
Very nice video ,simple and detailed,I would like to ask how do you choose the BMS? I bought four 3.2v 300Amps batteries,and a BMS 4s 300Amps ,did I do good or I should choose the BMS amps according to my solar panel power which is max 100Amps and not according to my battery amp power?
is the last cable of the BMS connected to the inverter . I noticed the last cable not connected to the last terminal on the bank ? awesome vid thank you i Leart a few things here
Thanks for the GREAT vid! Quick question. I am having a hard time finding a balance lead 8s with ring terminals. Where did you find yours? Thanks again!
Hi Rico. Thank you for watching and for your support. I made mine, but is quite simple to make anyone can do it. Just get some ring terminals and connect it. You can also search on Amazon for premade ones. Hope this helps. Please consider subscribing if you found the content useful. Thanks.
Yes on the voltage I’ve heard 90% which is about 3.33v to get longer life then charging up to 3.65 and don’t drain you’re batteries down to 2.5v DIY Solar !
Hello and thank you for the very helpful video, are you using a circuit breaker and shunt between your 24v battery and 3000w inverter? If so how many amps should your circuit breaker be, which shunt would you use and how would you configure it?
Great video. Can i ask you why only a 100Ah only BMS? I am planning to buy the same battery setup and i am not sure what Amp bms to buy. i tought a 310A batery will need a 300Ah BMS Am i wrong? Thanks in advance for your answer.
Hi. Thank you for your kind words and encouragement and for watching. I chose a 100 amp BMS because that will provide at 24 volts, 2400 watts of power. I may upgrade that in the future, but should be sufficient for my needs at the moment. The math works like this, very simple. To determine what size BMS you need. Volts x Amps = Watts. So in my case 24 volts x 100 amps = 2400 watts. If I wanted to use my full capacity of my 3000 watt inverter, I would take 3000watts/24 volts = 125 amps. I hope this is helpful to easily choose what size BMS you need. Thank you for watching and for your support. Please consider subscribing if you found the content useful. Thanks.
Greetings excellent video but I have a question about the configuration of charging the batteries, what would be the numbers for mppy Float voltage and absord voltage?
Hi Jose. Thank you for watching and for your support. Great question, it depends on many factors including your battery chemistry. If you have a lifepo4 battery and you don't want to fully charge it to 3.65 volts per cell because you want your cells to have a longer life. I have my bulk voltage set to 28.2 volts (3.52 per cell) and my float voltage set to 27.6 volts. But with lifepo4 float is not really required, these are really parameters for lead acid batteries. My inverter has a setting for lifepo4 and the bulk and float are locked together, so whatever you put your bulk to the float will automatically be the same number. Hope this helps. Please consider subscribing if you found the content useful. Thanks.
I found this video easily by searching in youtube, then very easy to understand (good video tutorial) helpful for how to install BMS 8s Lifepo4 in correct way. After following step by step,. Check pin one by one until last tiny red cable pin show 26volt.... But when pole positif battery and P- show nothing when checked with voltmeter... Any suggestion? Maybe BMS protect mode activated or what? Thank a lot for help
Hi Oneplus One Bara. Thank you for watching and for your support. It sounds like the BMS may be locked. Look on youtube how to jump start your bms. I hope this helps for you. Please consider subscribing if you found the content useful. Thanks.
You have about the same setup as I have recently built. Have you done a capacity test on any of your cells yet? I have 16 of the lifepo4 varicore 310ah cells from AliExpress and have been running them a few weeks now. They came pretty much balanced voltage wise. I paralleled the 2 8s banks for about a day to make sure there wasn’t much current transfer when I built the 2 24 volt banks. I also want with the Daly smart bms 200 amp. My inverter has a maximum dc input current rating at 175 amps so I wanted to make sure both of the bms’s would give it what it wanted. I will be placing a 150 amp inline fuse soon to protect a malfunction somewhere. I can also set safety parameters in the bms to stop current at so much charge/discharge if I need to. I ask about your capacity testing because these cells have only been giving and taking about 290-300 ah so far. I hope mine aren’t used with lowered capacity. I could have done a test better probably also but I was hoping to get 310 or more.
Hi Joshua, thank you for your post. I have not had time to do a capacity test as I was trying to get everything installed in my Van. I think you are spot on with the 290 to 300ah. My cells were also fairly close in voltage, however, I did do a top balancing. I have set my parameters on my Growatt for a max charge of 28.2 volts or 3.525 volts per cell. So, I am not pushing them to a full charge of 3.65. Do you have a shunt setup? Thanks for watching.
Hi Adrian, thank you for watching and for your comment. I have read several articles and watched several videos on compression of these cells and it does not seem to be worth it to compress these cells. Thanks.
Hello najs video 👍 are you pleased with the daly bms? Can you trust it and leave it be? Whats the maximum current you can draw from a 8s 24 v system of 310ah eve? And what is the Max current you can charge them with?
Hi Andreas. Thank you for watching and for your support. Yes, I am very pleased. It charges at 50 amps and I can draw a 100 amps at 24 volts which is the equivalent of 200 amps at 12 volt for a max of 2400 watts on my inverter. Please consider subscribing if you found the content useful. Thank you.
I have almost the same setup in my rv except I went with the Overkill Solar 100a BMS. The battery and BMS have been working perfectly but the Growatt inverter has been a bit of a problem. I would not buy another if I were going to build a new system.
Hi John, thank you for watching and for your support. What kind of issues have you been having with your Growatt? Curious to know. I have also had issues with my Growatt, however, issues seem to be worked out. Maybe I can help. Thanks.
Hi. I want to know that you did not tell us that how to operated the DALY BMS . Is it blue tooth enable how I can see the parameters . What's mobile app I may need for it.
Hi Zoheb, I am not a 100% sure, but I do know that your lithium iron phosphate cells have to be at least at 3.3 volts per cell to activate the bms. Hope this helps. You can activate it with the transfer switch on the growatt itself by charging that way. Thank you for watching and for your support. Please consider subscribing if you found the content useful. Thanks.
Hi Dennis. Thank you for watching and for your support. I understand what you are saying, I had the same questions, the issue is that you need a bench top power supply to get your batteries higher in voltage so that it can wake up your bms and start your inverter. You only need to do this once. You can return the bench top power supply after that. Hope this helps. Please consider subscribing if you found the content useful. Thanks.
Thank You Sir U saved my ass was wondering how to check the balancing leads, Its way better than the pop and smoke way that i normally use to test ..Very idiot friendly video
Hi Kevin. Thank you for watching and for your support. I appreciate the feedback and that is a great question. So the way to pick your bms, size your bms for the amount of watts you will be using divided by your battery bank voltage. In my case for example, I have a 3000 watt inverter and a 24 volt battery, so 3000/24 = 125 amps. So I went with the 100 amp bms because it was half the price, but it also means that I must not exceed 2400 watts (100 amps x 24 volts = 2400 watts. At some point I will buy a bit larger bms so I can run the full 3000 watts, but rarely does one use everything all at once. I hope that makes sense. Let me know if you have any more questions. Great question. I also struggled with this one at first. The Ah is really just the storage capacity of your batteries. Take care. Please consider subscribing if you found the content useful. Thanks.
@Think Free Live Free Hello, I may ask because I am interested in this bms, but I also have 24 volt installations, but ultimately it should be 48 or can I buy with a supply for 16 seconds and use only 8 seconds
@@thinkfreelivefree6951 @Think Free Live Free Hello, I may ask because I am interested in this bms, but I also have 24 volt installations, but ultimately it should be 48 or can I buy with a supply for 16 seconds and use only 8 seconds
@@thinkfreelivefree6951 I believe that what he is asking is if he could buy a 16S BMS and use it for 8S until he upgrades to 48V. I'm gonna assume that's a no?
Hi Ibian666. Thank you for watching and for your support. Thank you very much for this vital important information. The community will be very grateful. Please consider subscribing if you found the content useful. Thanks
27.6V is the float voltage and not enough to fully charge the batteries! The charger should be set to an absolute minimum of 28V and maximum (recommend) 29.2V
Wow! Thanks for the info, I wonder if the batteries were delivered from China to the USA? I bought 8 battery cells, I have been waiting for 9 months ... „they will give birth soon“😅. please give me the seller's address
Hi Mark. Thank you for watching and for your support. You will set your parameters on your solar charge controller/inverter, not on your BMS. I hope that helps. Please consider subscribing if you found the content useful. Thank you.
I have a ready Made Battery 24 volt 200ah and the bms wires are on the minus terminals of the battery's the wires are white apart from one being red going to to the positive and the other is black going to the minus why is this? when the above are on the positive there 8 cels and 50 watt each. can any body tell me why? as i need to change my bms and it is broken. bms not the same as the above.
Hi Zoheb. I did a lot of research before and considered compression, but ended up not going that route as it was not necessary or would have made a huge difference. Thank you for watching and for your support. Please consider subscribing if you found the content useful. Thanks.
Hi I have 200ah batts ordered just waiting lol... and a wifi daly120 amp bms ... very excited as my 6 8d batts blew up .....not fun or funny 😕 on those....
Hi Steve, that is very exciting. It surely is hard to wait once you have ordered them. Sorry about your other batteries, that sucks. Thank you for watching and for your support. Please consider subscribing if you found the content useful. Thanks.
UMMM INTERESSANTE IL VIDEO,ma non usi un bilanciatore attivo ? ilBMS serve solo per proteggere la batteria da HIG e low ,quindi visto che sono gia' in serie prima di caricarle dovresti collegare un bilanciatore attivo ,alrimenti potresti rovinare le celle
Oh brother, thankyou!
I am using a Daly Smart 48V 250A 16s, with 304 AH cells.
I just dint know what to do with P-. 😂😂😂
Then when I sat down, tried to calm down 😅, watched your video....the lightbulb went on, pardon the pun.
Okay, now I am clear, P- , is just that...its the negative. Oh my the relief you have provided me!
I've watched a dozen videos of this subject this was the best video by far.
Thank you so much Esa. I really appreciate it. I hope it brings some value to viewers. Thank you for watching and for your support. Please consider subscribing if you found the content useful. Thank you.
True, i was looking for 24volt lifpo batteries longtime, this one best one.
@@SafeerSefi Thank you very much for watching and for your support.
I'm only like10 minutes into this video and I can already confirm that this is the most helpful video I've found when connecting an 8s battery. Thank you! I feel that a lot of video creators skip over the "basic" stuff because they don't remember that they didn't understand it at one point. As someone who is doing this for the first time, it is very helpful.
Hi Ross. Thank you for watching and for your support. Your words really mean a lot, much appreciated. Thank you so much.
Just building my first batteries using basically the same components you did, so your video is so reassuring. Thank you.
He did it wrong! Don't plug the BMS plug in with the leads connected to the battery.... Plug the leads into the BMS, then attach each of the seven leads, one at a time to the battery - starting with the black and ending with the red. If they're already connected to the battery when the plug is connected, damage will occur to the BMS if the contacts don't make connection at exactly the same time and sequence.
Very easy to follow. I just got my 8 cells and gonna setup like you.
Great simple steps to prevent smoke coming out of the BMS
Thanks for this video, its still helping us a year or more later!
Excellent job - showing your viewers how to check things before they blow up their BMS or battery. '
Thank you sir. I appreciate the encouragement. Thank you for watching and for your support. Please consider subscribing if you found the content useful. Thank you.
Would have been more beneficial to have seen how you connected the black cable on your bms. Over all it was an informative video. Thank you for producing it.
going off grid in 2021 and learning everything at once.. this video is a lifesaver. Thanks TFLF
Hi. Thank you for watching and for your support. Please consider subscribing if you found the content useful. Thank you. Let me know how your off grid setup goes.
@@thinkfreelivefree6951 After using your assembly video as a guide, my 200ah 24v LiFePo4 is doing great! Using an Epever 4215BN and a 4000w Giandel inverter. Lots of power for my little trailer for now :) Thanks again TFLF
@@1quickdub Awe thank you man, appreciate your words. Good luck with your setup. Wow 4000 watts of inverter. That is some serious power. Thanks.
Thanks for the video. My cells are in transit with a delivery date of this coming Tuesday. I ordered [16] 3.2V 280ah Prismatic cells off Alibaba. They are shipping from a warehouse in Tx so I'm getting them a week after I ordered them for $150 each. So, for approx $2,600 I'll have a 13.4kwh battery bank. I still have to get a BMS. After watching your video I'm feeling better about setting them up.
Hi Doug, thank you so much for watching and for your support. That is very exciting about your cells arriving so fast. I had to wait almost 2 months for mine. Let me know if you have any questions during your setup. I will be happy to try to answer and if I don't know I can help research for a solution. Please consider subscribing if you found the content useful it really helps the channel grow. Thank you for sharing with all of us.
Very impressive video. I ordered a new 280A 3.2 LiFePO4 today for $212 from Ebay as a backup for my 16 battery 24v system. My BMS on the 2nd battery pack always showed one battery low. I checked the voltage today and it was 2.0V. I pulled that battery out and running it on a balancer (all day so far). I pulled another battery to connect it together to balance it faster; the connecting bar got pretty hot for 10 mins. I think the battery is not broken, just needed additional balancing. Your video helped me on how to connect my 200A 8S BMS to this number 2 battery pack. Installing the BMS as a leg on the negative side!
Hi Linda Foxwood. Thank you for watching and for your support. I appreciate your kind words, thanks. Glad the video was able to help. Good luck with your setup. Please consider subscribing if you found the content useful. Thanks.
Pretty useful info on this video of hooking these 310 AH high capacity cells correctly to ensure a safe way to charge them with a DALY BMS . This is a great video .
Hi Cedric Green. Thank you very much for watching and for your support and encouragement. Very much appreciated. Thanks.
Thanks for the tutorial. You simplified everything.
Very good
Wish I had seen this before I destroyed two cell from my 24 volts bank.
Thank you for watching and for your support. Please consider subscribing if you found the content useful. Thanks.
I am using 310 amp hour cells in my bus build. I got them from LItokala and it took about 7 weeks to get. I got 16 cells in a 2p8s configuration. I went with an ANT BMS as it has functional cold temperature cutoff where all the Daly ones that say they have it that I've seen tested [Will Prowse's channel] don't seem to actually shot off below freezing.
Nice man and good luck with your battery build. Its very exciting to make your own power. Thank you for watching and for your support. Please consider subscribing if you found the content useful. Thank you.
Thanks for the video-nice. I'm in the same process of making battery. I ordered 8 - 280ah cells but I will be using the Electrodacus bms. This will also be used in my van camper. Waiting on cells!
Hi Greg. Thank you for watching and for your support. Its very much appreciated. That is awesome that you are doing a camper van. The hardest part was waiting for the cells, 😁. Mine took over 2 months to arrive. Good luck and let me know if you have any suggestions. Take care.
Building an 8S 280ah pack now - very helpful thanks!
Oh dear very nice thank
Thank you... great descriptive!
Thank you for watching and for your support. Its very much appreciated.
Just placed my order yesterday, I got 16 310s, 2 8s24v150a bms, shipped for $2500.
Looking forward to getting my stuff in.
Nice Leo, exciting stuff. The hardest part is having to wait. That is going to be a really powerful setup. Nice!
$2500 US? is there GST and import tax yet?
@@shane6574 Hi. I did not have any additional charges on my batteries, import tax and any other fees is negotiated when placing your order with the vendor. I hope this helps. Please consider subscribing if you found the content useful. Thanks for watching.
@@shane6574 Was $2500 total shipped taxes import everything.
@@nikjim13 US Dollars or Australian Dollars?
Thanks! So clear! I got the prev gen 280ah eve cell.
Thank you very much for watching and for your support. Those Eve cells are amazing. Good luck with your build. Please consider subscribing if you found the content useful. Thank you.
Hi dear
Very nice 👍
Thank you
Hi Ahmed. Thank you for watching and for your support. Please consider subscribing if you found the content useful. It really helps the channel grow. Thanks.
That helped a lot. Was lost, tnxs a lot sir!
Great videos, helped a lot. I am researching to do the same setup with 16 CATL 310ah cells and the 48v 5k version of the inverter for a household.
Thank you Pierre. That sounds like an awesome setup with a lot of storage capacity, almost 15 kilowatt hours. Thank you for watching and for your support. Please consider subscribing if you found the content useful. Thanks. Good luck with your build. Let me know how its going.
Very nice video ,simple and detailed,I would like to ask how do you choose the BMS? I bought four 3.2v 300Amps batteries,and a BMS 4s 300Amps ,did I do good or I should choose the BMS amps according to my solar panel power which is max 100Amps and not according to my battery amp power?
excellent video, well explained
Thank you very much for your support and for watching. Please consider subscribing if you found the content useful.
is the last cable of the BMS connected to the inverter . I noticed the last cable not connected to the last terminal on the bank ? awesome vid thank you i Leart a few things here
You can give more details about that bms. I am interested in buying a similar one to equalize the 24v s8 320A. Thanks
Yes it was very helpful.
nice video thankyu ...
Thanks for the GREAT vid! Quick question. I am having a hard time finding a balance lead 8s with ring terminals. Where did you find yours? Thanks again!
Hi Rico. Thank you for watching and for your support. I made mine, but is quite simple to make anyone can do it. Just get some ring terminals and connect it. You can also search on Amazon for premade ones. Hope this helps. Please consider subscribing if you found the content useful. Thanks.
Could you change and discharge at the same time?
Yes on the voltage I’ve heard 90% which is about 3.33v to get longer life then charging up to 3.65 and don’t drain you’re batteries down to 2.5v DIY Solar !
Hello and thank you for the very helpful video, are you using a circuit breaker and shunt between your 24v battery and 3000w inverter? If so how many amps should your circuit breaker be, which shunt would you use and how would you configure it?
Great video. Can i ask you why only a 100Ah only BMS? I am planning to buy the same battery setup and i am not sure what Amp bms to buy. i tought a 310A batery will need a 300Ah BMS Am i wrong? Thanks in advance for your answer.
Hi. Thank you for your kind words and encouragement and for watching. I chose a 100 amp BMS because that will provide at 24 volts, 2400 watts of power. I may upgrade that in the future, but should be sufficient for my needs at the moment. The math works like this, very simple. To determine what size BMS you need. Volts x Amps = Watts. So in my case 24 volts x 100 amps = 2400 watts. If I wanted to use my full capacity of my 3000 watt inverter, I would take 3000watts/24 volts = 125 amps.
I hope this is helpful to easily choose what size BMS you need. Thank you for watching and for your support. Please consider subscribing if you found the content useful. Thanks.
I doubled my BMS size. Runs cooler. Cheap stuff from the other side will not put out to specs.
Greetings excellent video but I have a question about the configuration of charging the batteries, what would be the numbers for mppy Float voltage and absord voltage?
Hi Jose. Thank you for watching and for your support. Great question, it depends on many factors including your battery chemistry. If you have a lifepo4 battery and you don't want to fully charge it to 3.65 volts per cell because you want your cells to have a longer life. I have my bulk voltage set to 28.2 volts (3.52 per cell) and my float voltage set to 27.6 volts. But with lifepo4 float is not really required, these are really parameters for lead acid batteries. My inverter has a setting for lifepo4 and the bulk and float are locked together, so whatever you put your bulk to the float will automatically be the same number. Hope this helps. Please consider subscribing if you found the content useful. Thanks.
I found this video easily by searching in youtube, then very easy to understand (good video tutorial) helpful for how to install BMS 8s Lifepo4 in correct way. After following step by step,. Check pin one by one until last tiny red cable pin show 26volt.... But when pole positif battery and P- show nothing when checked with voltmeter... Any suggestion? Maybe BMS protect mode activated or what? Thank a lot for help
Hi Oneplus One Bara. Thank you for watching and for your support. It sounds like the BMS may be locked. Look on youtube how to jump start your bms. I hope this helps for you. Please consider subscribing if you found the content useful. Thanks.
You have about the same setup as I have recently built. Have you done a capacity test on any of your cells yet? I have 16 of the lifepo4 varicore 310ah cells from AliExpress and have been running them a few weeks now. They came pretty much balanced voltage wise. I paralleled the 2 8s banks for about a day to make sure there wasn’t much current transfer when I built the 2 24 volt banks. I also want with the Daly smart bms 200 amp. My inverter has a maximum dc input current rating at 175 amps so I wanted to make sure both of the bms’s would give it what it wanted. I will be placing a 150 amp inline fuse soon to protect a malfunction somewhere. I can also set safety parameters in the bms to stop current at so much charge/discharge if I need to. I ask about your capacity testing because these cells have only been giving and taking about 290-300 ah so far. I hope mine aren’t used with lowered capacity. I could have done a test better probably also but I was hoping to get 310 or more.
Hi Joshua, thank you for your post. I have not had time to do a capacity test as I was trying to get everything installed in my Van. I think you are spot on with the 290 to 300ah. My cells were also fairly close in voltage, however, I did do a top balancing. I have set my parameters on my Growatt for a max charge of 28.2 volts or 3.525 volts per cell. So, I am not pushing them to a full charge of 3.65. Do you have a shunt setup? Thanks for watching.
I believe you need to build a structure with studs to squeeze the batteries together. they last longer
Hi Adrian, thank you for watching and for your comment. I have read several articles and watched several videos on compression of these cells and it does not seem to be worth it to compress these cells. Thanks.
Hello najs video 👍 are you pleased with the daly bms? Can you trust it and leave it be? Whats the maximum current you can draw from a 8s 24 v system of 310ah eve? And what is the Max current you can charge them with?
Hi Andreas. Thank you for watching and for your support. Yes, I am very pleased. It charges at 50 amps and I can draw a 100 amps at 24 volts which is the equivalent of 200 amps at 12 volt for a max of 2400 watts on my inverter. Please consider subscribing if you found the content useful. Thank you.
I have almost the same setup in my rv except I went with the Overkill Solar 100a BMS. The battery and BMS have been working perfectly but the Growatt inverter has been a bit of a problem. I would not buy another if I were going to build a new system.
Hi John, thank you for watching and for your support. What kind of issues have you been having with your Growatt? Curious to know. I have also had issues with my Growatt, however, issues seem to be worked out. Maybe I can help. Thanks.
Does these cells have to be in a box?
Hi. I want to know that you did not tell us that how to operated the DALY BMS . Is it blue tooth enable how I can see the parameters . What's mobile app I may need for it.
Bms daly hangi modeli tesekkurler
How much current is needed to activate this bms
Hi Zoheb, I am not a 100% sure, but I do know that your lithium iron phosphate cells have to be at least at 3.3 volts per cell to activate the bms. Hope this helps. You can activate it with the transfer switch on the growatt itself by charging that way. Thank you for watching and for your support. Please consider subscribing if you found the content useful. Thanks.
If ur cells come perfectly balanced at 3.29v do i need to still do a top balance ?
How do you hook up a solar controller and inverter with this set up? Why would I need a charger? The whole point is I want to use solar?
Hi Dennis. Thank you for watching and for your support. I understand what you are saying, I had the same questions, the issue is that you need a bench top power supply to get your batteries higher in voltage so that it can wake up your bms and start your inverter. You only need to do this once. You can return the bench top power supply after that. Hope this helps. Please consider subscribing if you found the content useful. Thanks.
Thank You Sir U saved my ass was wondering how to check the balancing leads, Its way better than the pop and smoke way that i normally use to test ..Very idiot friendly video
Great video. Curiosity question. Your cells are 310 AH and your BMS is 100 a. Shouldn't the BMS be at least 310a. Thanks.
Hi Kevin. Thank you for watching and for your support. I appreciate the feedback and that is a great question. So the way to pick your bms, size your bms for the amount of watts you will be using divided by your battery bank voltage. In my case for example, I have a 3000 watt inverter and a 24 volt battery, so 3000/24 = 125 amps. So I went with the 100 amp bms because it was half the price, but it also means that I must not exceed 2400 watts (100 amps x 24 volts = 2400 watts. At some point I will buy a bit larger bms so I can run the full 3000 watts, but rarely does one use everything all at once. I hope that makes sense. Let me know if you have any more questions. Great question. I also struggled with this one at first. The Ah is really just the storage capacity of your batteries. Take care. Please consider subscribing if you found the content useful. Thanks.
@Think Free Live Free Hello, I may ask because I am interested in this bms, but I also have 24 volt installations, but ultimately it should be 48 or can I buy with a supply for 16 seconds and use only 8 seconds
@@chapluczekful Hi. I am sorry, but I don't understand? Is it possible for you to translate? Thank you watching and for your support.
@@thinkfreelivefree6951 @Think Free Live Free Hello, I may ask because I am interested in this bms, but I also have 24 volt installations, but ultimately it should be 48 or can I buy with a supply for 16 seconds and use only 8 seconds
@@thinkfreelivefree6951 I believe that what he is asking is if he could buy a 16S BMS and use it for 8S until he upgrades to 48V.
I'm gonna assume that's a no?
Can I connect P- to victron mppt negative side
Hello,
Can I ask here Question?
Hi Salih. What is your question? Thank you for watching and for your support. Please consider subscribing if you found the content useful. Thanks.
The temperature sensor should be on the side of the battery, never the top. There is an air pocket on top, it won't work properly like that.
Hi Ibian666. Thank you for watching and for your support. Thank you very much for this vital important information. The community will be very grateful. Please consider subscribing if you found the content useful. Thanks
27.6V is the float voltage and not enough to fully charge the batteries! The charger should be set to an absolute minimum of 28V and maximum (recommend) 29.2V
Wow! Thanks for the info, I wonder if the batteries were delivered from China to the USA? I bought 8 battery cells, I have been waiting for 9 months ... „they will give birth soon“😅. please give me the seller's address
How to set all the parameters on you’re DALIY BMS 15S 40A 3.2v 280A lithium Phosphate batteries ?
Hi Mark. Thank you for watching and for your support. You will set your parameters on your solar charge controller/inverter, not on your BMS. I hope that helps. Please consider subscribing if you found the content useful. Thank you.
I have a ready Made Battery 24 volt 200ah and the bms wires are on the minus terminals of the battery's the wires are white apart from one being red going to to the positive and the other is black going to the minus why is this? when the above are on the positive there 8 cels and 50 watt each. can any body tell me why? as i need to change my bms and it is broken. bms not the same as the above.
Why didn't u compress the cells...
Hi Zoheb. I did a lot of research before and considered compression, but ended up not going that route as it was not necessary or would have made a huge difference. Thank you for watching and for your support. Please consider subscribing if you found the content useful. Thanks.
310ah battery with 100ah bms??
Would of been nice if you showed until you connect to the inverter.
Hi I have 200ah batts ordered just waiting lol... and a wifi daly120 amp bms ... very excited as my 6 8d batts blew up .....not fun or funny 😕 on those....
Hi Steve, that is very exciting. It surely is hard to wait once you have ordered them. Sorry about your other batteries, that sucks. Thank you for watching and for your support. Please consider subscribing if you found the content useful. Thanks.
UMMM INTERESSANTE IL VIDEO,ma non usi un bilanciatore attivo ? ilBMS serve solo per proteggere la batteria da HIG e low ,quindi visto che sono gia' in serie prima di caricarle dovresti collegare un bilanciatore attivo ,alrimenti potresti rovinare le celle
Practice cable management