My new turntable arrived a few days ago equipped with the OM10 (ProJect/NAD C558) - which is the best I've ever heard any record sound in my home. However, I'm already dying to hear how much better the OM20 might sound. Is there something wrong with me? 🤔😆
If only more affordable cartridges would be released with a Replicant 100. I'm interested in that one, but shelling out 6k is a bit too much for just trying something new.
It's funny that you spoke how close you can get to the cutting needle in shape before it starts to destroy the groove/ vinyl because that question arrived for me at just that moment.
I’m intrigued that some modest M/C’s have a specification as good as if not better than some exotic cartridges that cost 10 times as much. They also have boron cantilevers and quality stylus profiles and yet the price difference, it’s a mystery.
Nice explanation. Although, as it is constantly said in the video the amount of contact area between the groove and the stylus is important, it does not talk about the quality that the material must have to transmit the vibrations to the cantilever, which will eventually become the voltage of the audio signal, which is also important. In the case of needles that are not naked and are mounted on a titanium support, for example, the change of material also affects, not only the smaller contact surface.
Un gran video que explica claramente los distintos tipos de "stylus shape" y su desempeño en la alta fidelidad o mejor dichoen la adquicisiòn de informaciòn que està impreso en el disco vinilo, ciertamente se han citado la mayorìa de los tipos de agujas (stylus), pero por curiosidad quiero saber que aplicaciòn o desempeño tiene la "conical 0,5r?, consideraciones respecto a la compliance y graduaciòn de peso?
Buongiorno Signor JOHANNSEN. La Ringrazio per accompagnarci nel mondo delle testine fonografiche, e negli stili di lettura. 🔝🔝🔝🔝🔝🔝🔝🔝🔝🔝🤗🤗🤗🤗🤗🙋♂️🙋♂️🙋♂️👍👍👍👏👏👏
I opened the clip being interested about cartriges not styluses becuse in my opinion not the contacting end of stylus makes greatest differences between cartriges. I used three different types of B&O MM cartriges which had 3 different kinds of stylus - spheric, eliptyc and full contact and differences are only small. My colege uses ortofon recommended by reviewers and it does not compare to any of my styluses because his cartrige and arm is no comparably heavier than in my turntable and tracking force is double that of mine (I have only 1 gramm) ,. Thus he has problems to walk around his playing sophisticated Sony while I can brush manualy LP even during playing Surprisingly the condition of my produced in 60ties and 70ties LPs due to cleaning with each playing do not degrade but improves only. This are differences I care about.
Great series that demystifies some of the jargon used in cartridge specs and perhaps highlights audible gains from better profiles require more careful cartridge set up - especially Shibata ........ Great educational video that clearly explains the virtues of different stylus geometry. Thank you Ortofon!
Currently running a Exact2 cart on my Rega TT. The cantilever is slightly off center but it still tracks and sounds VERY good. Excited to try one of the Ortofon products when I'm in need for a new stylus.
Another great video with all the info you could ask for. So thank you again for explaining everything that needs to be told to everyone out there who wants to go on this journey with Vinyl music.
Can anyone comment on styli shapes when they encounter dust on a record? What is the best way to clean records before each play. Thank you for this great series!
Ultrasonic cleaner by far the best way set to 36 c degrees isopropyl alcohol 15% distilled water 7 drops of dawn dishwashing detergent then a rinse bay with dishwashing rinse aid . I dry my records on a bamboo dish rack with fans to avoid pooling
The cost of upgrading anything is purely outrageous and unacceptable. No wonder there are billion dollar companies and C.E.O's that make millions of dollars.
I too have followed the whole series and found it very interesting and informative. Thank you for taking the time to make these videos.
My new turntable arrived a few days ago equipped with the OM10 (ProJect/NAD C558) - which is the best I've ever heard any record sound in my home. However, I'm already dying to hear how much better the OM20 might sound. Is there something wrong with me? 🤔😆
What are the best styli shapes for different records - old shellac, old mono, later mono, styrene, early stereo and later stereo?
Thank you so much!
Question i have a ortofon 5e cartridge can i put an om20 or om30 stylus on that cartridge . I'm led to believe you can ?
15:53 - ah - just answered thought about why not use the original needle! Thanks.
If only more affordable cartridges would be released with a Replicant 100.
I'm interested in that one, but shelling out 6k is a bit too much for just trying something new.
It's funny that you spoke how close you can get to the cutting needle in shape before it starts to destroy the groove/ vinyl because that question arrived for me at just that moment.
I’m intrigued that some modest M/C’s have a specification as good as if not better than some exotic cartridges that cost 10 times as much. They also have boron cantilevers and quality stylus profiles and yet the price difference, it’s a mystery.
Nice explanation. Although, as it is constantly said in the video the amount of contact area between the groove and the stylus is important, it does not talk about the quality that the material must have to transmit the vibrations to the cantilever, which will eventually become the voltage of the audio signal, which is also important. In the case of needles that are not naked and are mounted on a titanium support, for example, the change of material also affects, not only the smaller contact surface.
Un gran video que explica claramente los distintos tipos de "stylus shape" y su desempeño en la alta fidelidad o mejor dichoen la adquicisiòn de informaciòn que està impreso en el disco vinilo, ciertamente se han citado la mayorìa de los tipos de agujas (stylus), pero por curiosidad quiero saber que aplicaciòn o desempeño tiene la "conical 0,5r?, consideraciones respecto a la compliance y graduaciòn de peso?
Buongiorno Signor JOHANNSEN. La Ringrazio per accompagnarci nel mondo delle testine fonografiche, e negli stili di lettura. 🔝🔝🔝🔝🔝🔝🔝🔝🔝🔝🤗🤗🤗🤗🤗🙋♂️🙋♂️🙋♂️👍👍👍👏👏👏
I opened the clip being interested about cartriges not styluses becuse in my opinion not the contacting end of stylus makes greatest differences between cartriges. I used three different types of B&O MM cartriges which had 3 different kinds of stylus - spheric, eliptyc and full contact and differences are only small.
My colege uses ortofon recommended by reviewers and it does not compare to any of my styluses because his cartrige and arm is no comparably heavier than in my turntable and tracking force is double that of mine (I have only 1 gramm) ,. Thus he has problems to walk around his playing sophisticated Sony while I can brush manualy LP even during playing Surprisingly the condition of my produced in 60ties and 70ties LPs due to cleaning with each playing do not degrade but improves only. This are differences I care about.
Great series that demystifies some of the jargon used in cartridge specs and perhaps highlights audible gains from better profiles require more careful cartridge set up - especially Shibata ........ Great educational video that clearly explains the virtues of different stylus geometry.
Thank you Ortofon!
One question about 2M Mono. Is the replacement stylus of 2M Mono SE compatible with the 2M Mono standard cartridge?
Currently running a Exact2 cart on my Rega TT. The cantilever is slightly off center but it still tracks and sounds VERY good. Excited to try one of the Ortofon products when I'm in need for a new stylus.
Another great video with all the info you could ask for. So thank you again for explaining everything that needs to be told to everyone out there who wants to go on this journey with Vinyl music.
Fabulous video, reason why I bought the Quintet Black S
Can anyone comment on styli shapes when they encounter dust on a record?
What is the best way to clean records before each play.
Thank you for this great series!
Use a micro bristle toothbrush to clean a record. They are Chinese and are usually advertised as 10000 - 20000 bristles.
shabata styli get all the dirt out
Ultrasonic cleaner by far the best way set to 36 c degrees isopropyl alcohol 15% distilled water 7 drops of dawn dishwashing detergent then a rinse bay with dishwashing rinse aid . I dry my records on a bamboo dish rack with fans to avoid pooling
Many thanks for these, I've really enjoyed the series, very clearly explained.
I bought my first Ortofon product yesterday :)
I’ve heard that conical round styli are best for styrene 45 rpm records. True or false?
I’d like an answer to that as well…
You had à v.d.hul 2, OM40
So usefull
The cost of upgrading anything is purely outrageous and unacceptable. No wonder there are billion dollar companies and C.E.O's that make millions of dollars.
Where you get your numbers from? No mention of costs in this video… btw the plural of CEO is simply CEOs. You don’t need to use an apostrophe…
@bristolfashion4421 Okay thanks for the correction.