Hiya mate my front break lever is sitting just loose off the front break switch meaning my rear light is always on how do I adjust it to sit properly/ stop it from being loose
Hiya mate great video, my bike dropped yesterday & had the same thing happen to mine as this one. Will any brake lever brought off Amazon or etc just fit into my bike?
Double check the fitment side bud as in cable or hydrolic. To be fair most will fit as long as its for the same cc bike as in 50cc 125cc As some big bike levers are longer So study the picture and and size info If not e bay your bike then order
Hi mark i recently acquired a piaggio NRG 50cc 2009 LC and carb. old owner said it had a rebuild bit on his journey home would only do 15-20mph max since then he saw it unfit to ride and bought another bike it cranks and got compression and spark still yet to change the fuel lines and clean the carb which is an obvious thing to do but anything else you would recommend to try?
hello Mark. I have a question for you. when I go to try and start my scooter and turn on ignition switch and squeeze the brake lever...the scooter tries to turn over?? before I even push the start button. any idea of what might be going on here?
Hey mark can you tell me what is the perfect carb setting for peugeot speedfight2 so i know its not lean nor rich like how much do i screw in the mixure or screw out all that stuff thanks btw i watched previous vids but i still cant find an answer
hey , I want to know I have a 50 cc iride with my wife , but going up hill it slow down to 15 mph, is it the roller I have to change it total weight is about 325 , so how can I fix my problems
So, on my 50cc, the rear brake handle requires a lot more compression before the brake light comes on, and then if it's squeezed too far, the brake light goes out, whereas my front brake handle is a hair trigger, a slight squeeze and the brake light comes on... what could be the issue with the rear brake handle system?
@@jeffkrauss5582 its more about he head placement bud , its not just a plug and play for the head , plus the crank would need to be bigger , easier just to swap the engine or just get a bigger ped all round , you can get big bore kits but again then you have to change the carb etc
Hey man, thanks for the tips, I was looking for serial numbers and everything to find the right one! Well you just made my time a whole lot easier.
Great tutorial,very useful,thanks
Hiya mate my front break lever is sitting just loose off the front break switch meaning my rear light is always on how do I adjust it to sit properly/ stop it from being loose
The lexmoto echo 50cc has a an extra bit on the handle for the switch. I'm having trouble finding the part and the ped is only 6 years old
Does it work the same way with taotao motorcycle
Great video mate as always. is there a way to adjust the distance to make it closer to the hadle bar for incase you have smaller hands.?
They are adjustable levers on e bay and other site bud
All big bikes normally have them
They will fit yours
Just check before you buy bud
Hiya mate great video, my bike dropped yesterday & had the same thing happen to mine as this one. Will any brake lever brought off Amazon or etc just fit into my bike?
Double check the fitment side bud as in cable or hydrolic.
To be fair most will fit as long as its for the same cc bike as in 50cc 125cc
As some big bike levers are longer
So study the picture and and size info
If not e bay your bike then order
Awesome video, thank you!❤
thanks bud , many more on my channel
Hi mark i recently acquired a piaggio NRG 50cc 2009 LC and carb. old owner said it had a rebuild bit on his journey home would only do 15-20mph max since then he saw it unfit to ride and bought another bike it cranks and got compression and spark still yet to change the fuel lines and clean the carb which is an obvious thing to do but anything else you would recommend to try?
check the variator system bud as in my videos, it will help
@@marksavage brilliant cheers mark
hello Mark. I have a question for you. when I go to try and start my scooter and turn on ignition switch and squeeze the brake lever...the scooter tries to turn over?? before I even push the start button. any idea of what might be going on here?
Starter button jammed In ,take off spray up unjam or replace bud
@@marksavage im going to try that thank you very much for that tip.
Hey mark can you tell me what is the perfect carb setting for peugeot speedfight2 so i know its not lean nor rich like how much do i screw in the mixure or screw out all that stuff thanks btw i watched previous vids but i still cant find an answer
i do have many videos on carb settings and easy to find
carb mark savage
tuning carb
3 half and work in of out bud
@@marksavage thanks i'll try
Hello mark we’re about are you based as I really need help wid my 2t Aprilia ped
i heard that creating a ball on the end of the brake lever will pass an MOT ?
It has to have an end and can't be shape ,otherwise it will fail bud
To be honest under £10 it's just better to buy a new one
hey , I want to know I have a 50 cc iride with my wife , but going up hill it slow down to 15 mph, is it the roller I have to change it total weight is about 325 , so how can I fix my problems
If it slow on load then yes
Follow my variator video
As for your ped as I don't know whiche it is
Best Google
So wat king of rollers should I use
My moped 50cc is a transport moped
very helpful videos mate i like doing my own work on my bike
What happens when the bike it's dropped and the brakes level mounting is broken?????..
the mount will need replacing bud
I. Can’t get a screw out of it I keep on unsrewing and it won’t come out so what do I do ? Keep trying ?
If the nut is off push up from underneath while turning and it will come up then lift out bud
So, on my 50cc, the rear brake handle requires a lot more compression before the brake light comes on, and then if it's squeezed too far, the brake light goes out, whereas my front brake handle is a hair trigger, a slight squeeze and the brake light comes on... what could be the issue with the rear brake handle system?
Same here, except my right one doesn't work at all, may have to get it replaced asap
Can you point me in the right direction of anyone installing a 100cc bbk in an aprilia 2t scooter ty
as in swapping engine or head
@@marksavage head
@@jeffkrauss5582 you wont get a 100cc head on the 50cc engine , 70cc kits , you would have to change the whole engine
but it wont pass a 50cc mot bud
@@marksavage I’m in the states I thought I could bore out the engine
@@jeffkrauss5582 its more about he head placement bud , its not just a plug and play for the head , plus the crank would need to be bigger , easier just to swap the engine or just get a bigger ped all round ,
you can get big bore kits but again then you have to change the carb etc
Hi
My brake reservoir is leaking
How do i replace it ?.
its really simple with only a few bolts to take it off and the tube to the brakes, then refit and fill and bleed brakes as in my videos
@@marksavage thank you I'll check it out today
How to replace the rear brake lever
Same but if cable you just have too unclip it once off
you say dont drop screw down front of fairing like i did
As you said bud , so annoying then if you don't find them they rattle about !
@@marksavage it was in under tray mate