She was lucky enough to turn the antenna she made into an anode (+) that was extended in contact through the original antenna without the negative (-) wires.
Wow then cable runs are gona kill any gains , use lmr400 not that cheap coaxial run plus your using satellite 75 ohm connectors ur gona have a mismatch as it all needs to be 50 ohm
RUBISH, THIS IS A BAD EXAMPLE OF BUILDING AN ANTENNA, FIRST DRIVE ELEMENT SHOULD BE SEPARATED FROM THE RECEIVER DISK AND REFLECTOR, SECOND IN CONNECTOR YOU LOST GROUND WHY?
Amigo! Ese material es hoja e lata? Cuánto debe ser el grosor? Se puede hacer con laminas de aluminio o laminas de cobre? Hay alguna antena del mismo modelo pero que trabaje en las bandas 900/1800/2100 mhz? En dado caso de tener que fabricarlas por separado, se podrían tener 3 antenas en el mismo mástil? Muchas gracias, ha Sido de mucha ayuda su vídeo (y)
Please subscribe ua-cam.com/channels/uUjTAyOmB73jtRkTmKXgUg.html
Don't earth driven element wast of time
She was lucky enough to turn the antenna she made into an anode (+) that was extended in contact through the original antenna without the negative (-) wires.
To improve single and consistency you need to separate receiver disk from the reflector.
Need to isolate with insulators
What is reciever sir what do you mean sir?
@@brajeshsahu9121 ithink he mean director disks
U need to isolate the driven element from the other discs otherwise ur antenna will perform horrible and you can damage your router
What frequency is this tuned for? Where can I find calculations for other frequencies?
Can u use a omnidirectional tv outside and a flat panel inside connected together both powered for a booster
why ground ifit not be connected?? more meters of coaxial just loss signal.
🔥🔥🔥🔥
Bonjour, pour 900Mhz et 2100Mhz ce serait quel diamètre est distance ? Merci
No mostras el momento de conectar los cables a la antena, y que es elemental para hacerlo bien
Wow then cable runs are gona kill any gains , use lmr400 not that cheap coaxial run plus your using satellite 75 ohm connectors ur gona have a mismatch as it all needs to be 50 ohm
Are distance between to plates not changed in different frequency???
Distance between plate varies according to required frequency
is this really working to a dead spots area?
Good
Is this really helps to improve signal ?? I hope this is loll😀😀
Que es y cómo se llama lo que conectas a la antena que le da la conexión al teléfono
b593u-12 can you use it?
Zo'r 👍🙂🙂
Thanks
Muy buenos muy buenos
Te funcionó?
kis matrel sy baya hai
Hebatka . Solusi dong g gimana cara nangkap signale WiFi orbit pake antena Yagi xteme
that was poor connection because no ground connection ... is should have for outer shield cable for gnd connection and better performance
Which material did you use?
Ya I want to know too
U are checking @ wifi speed at the screen
This way for 3g only
Please tell me its working frequency range
Ini model antena induksi ya kak
RUBISH, THIS IS A BAD EXAMPLE OF BUILDING AN ANTENNA, FIRST DRIVE ELEMENT SHOULD BE SEPARATED FROM THE RECEIVER DISK AND REFLECTOR, SECOND IN CONNECTOR YOU LOST GROUND WHY?
You comment is rubish antenna too. No solution just comment is zero. Big LOL
@@samuelhendrawsinaga1064 Read again. He needs to separate the receiver disk and reflector. That is the solution. Bigger LOL
@@samuelhendrawsinaga1064 dumbass
What kind of signal cable is it?
this is a TV antenna cable
سلام وقت بخیر .به زبانه فارسی لطفا ترجمه کنید
It shouldn't work properly as 2nd disk is not isolated from rod
how to isolated the 2nd disk sir , is it by making a big hole, isolated from rod
@@shyedkhan9347 no cover rod with tape or plastic
there congested
👍👍👍👍😳
😊
download 33.11 Mbps
Факат центральный жилани пайка килдиз оплетканихам пайка килиш керак ундан кейн сиз ясаган схема буйча антенна тугри эмас
Лекин ишлади сигнал кучайди
Amigo!
Ese material es hoja e lata?
Cuánto debe ser el grosor?
Se puede hacer con laminas de aluminio o laminas de cobre?
Hay alguna antena del mismo modelo pero que trabaje en las bandas 900/1800/2100 mhz?
En dado caso de tener que fabricarlas por separado, se podrían tener 3 antenas en el mismo mástil?
Muchas gracias, ha Sido de mucha ayuda su vídeo (y)
0
Fake.
not the best