6 Cup Tumbler Turner Tutorial DIY
Вставка
- Опубліковано 5 вер 2024
- Hi GUYSS :) This weeks video is a little different than usual. My husband put together this 6 cup tumbler turner box with an added cover. I posted my new turner box on my social media & lots of you were interested on how we made it. LUCKILY, I filmed the entire process so I put together this video for you all to follow along. My husband had to help me here with the voice over.. I was lost most of the time & was mostly just in his way lol Below you will find links to everything used in the video. THANK YOU FOR WATCHING :)
LETS CONNECT :)
FOLLOW ME ON INSTAGRAM: @ melissacrafter00
/ melissacrafter00
JOIN ME ON TIK TOK:
Tiktok: @melissacrafter
Buy Me Coffee :) Never expected, ALWAYS appreciated!
www.paypal.com...
Shop all my Amazon Favorites on my Amazon Store Front :
www.amazon.com...
*If you are a company/business who would like to contact me about reviewing a product... please email me at melissacrafter00@gmail.com
*I do participate in various affiliate programs. Some links that I share provide me with a small commission if you make a purchase. This is at NO extra cost to you. I only recommend products I personally use.
“As an Amazon Associate I earn from qualifying purchases.”
Materials List:
(ALL WOOD USED IS 1 INCH IN HEIGHT)
4- 3x10 wood pieces
2- 4x 36 wood pieces
3- 10x36 wood pieces
1- 24x36 wood piece
Corner braces 1 1/2inch:
www.homedepot....
3/4 inch Wood Screws:
www.homedepot....
Drill:
www.amazon.com...
Forstner Bit Set:
www.amazon.com...
Drill Bit Set:
www.homedepot....
Cabinet Door Catch:
www.homedepot....
6 Cup Turner Kit:
6 Turner Kit (The one I bought): www.amazon.com...
6 Turner Kit with Removable Pvc Pipes:
www.amazon.com...
Materials Used For Added Cover:
Acrylic Sheet (36x30):
www.homedepot....
3/4 inch Wood Screws:
www.homedepot....
32 x 3/8 in. Combo Round Head Machine Screw :
Plastic Sheet Cutting Tool:
www.homedepot....
Angle Bar:
www.homedepot....
Continuous Hinge:
www.homedepot....
Other Tuner Kit Options:
8 Turner Kit:
www.amazon.com...
4 Turner Kit:
www.amazon.com...
3 Turner Kit:
www.amazon.com...
Additional Materials:
Turner Foam Inserts:
www.amazon.com...
6 Outlet Power Strip:
www.amazon.com...
Harbor Freight Work Bench:
www.harborfrei...
Thank you for sharing this with us. It certainly makes it easier for us to follow your journey as you built your covered turners. ☺️
Omg...the best cup turner station on UA-cam! You good make a small fortune if you wrote up written instructions with assembly pictures and a supply list!! I have a very handy son and I'm sure he would build this for me! Thanks for sharing this genius idea!
⁷⁷7⁷
I was hoping it was going to be one motor to turn all of the tumblers. So this is essentially it’s a holder for all of the turners with a container to protect from dust, flies and fumes. Great job!
My husband isn’t going to do this for me since he knows I can build, so these instructions are greatly appreciated!!! Will make the build so much easier and just one trip to Lowes!! Lol. Thank you...and your hubs!!!
Thank u so much for this video!! I’ve been trying to figure out how to add a cover to my turner and couldn’t find any instructions or tutorials! Ur a life saver!!
What a wonder husband! I’m thankful he’s doing well too! So happy for you! Thank for sharing! It’s amazing 🤩
I came here looking to make a turner box cover and this is perfect!!
So dope ❤ thanks for sharing
Awesome video!!!!❤
OMG! Thank you thank you!!! Thank you! And your husband for this detailed, so helpful, instructional tutorial for this!! Literally the best on UA-cam!! 🔥🔥👏👏😁🥰
Yay! We are so glad we could help 😊💖
You are amazing. Thanks for sharing all your work. Good video.🙌🙌👏👏👏👏💕💕
Thank you so much for this video!
Great video! Thank you so much for doing a voice over on this video. I've been wanting to make a tumbler turner and have watched numerous video tutorials that I can't hear at all.
You are very welcome 😊
Wowwwwww this absolutely perfect/ amazing
You keep saying "I'm" but it looks like your hubby. (I'm only playing.) You and your husband did and OUTSTANDING job!!!! I am a newbie to tumbler making so this is an excellent video to save to my tumbler list in case I love it so much that I end up needing to make one myself. LOVE it! 💙💜🤍💜💙
Lol I like to take credit for it when in reality I was mostly just in the way 😂
Welcome to tumbler making! I would love to see your turner once it’s done 😊💖
@@MelissaCrafter You were the moral support girl! And that means way more than anything. LOL!!
I love your cup turner. I hope my boys can make one like this. I have that same work bench, but I use it for my molds and to glitter stuff. My boys made me an awesome, huge work bench for my turners with upper and lower shelves. I love it. But I need this turner in my life.
Oh yeah! Thank you so much for the links and again thank you for sharing this detailed amazing turner with cover video!! 🌸
You’re very welcome 😊💖
I been waiting on this. Thank you. I follow you on Tik Tok 😘😘
Yay!! You’re welcome 🥰
Love the turner going to have my husband make me one. Thank you so much for the tutorial.
I tried it and it came out great!! Thanks so much. Wish I knew how to it.
Brilliant. I built my own turners, but I think I could easily add a cover similar to this. Thanks for sharing.
Oh my god this video was so amazing I watched it twice have to make one Thanks
You’re welcome 😊
Tysm ❤😊
Shout out to these hubbys! Sending to mine rt now.
can i make a suggestion.. go on amazon and replace the surge outlet with a WIFI surge protector one... this way u can use the app for it to set a timer on each plug..
Look so neat and clean love it
Amazing gonna have to build myself 1
Love this so much. I. Going to ask my father in-law to make me one
Thank you so much!! I’ve been wanting to add a cover and this is amazing. It turned out perfectly!!
This awesome. Great job, thanks for sharing
Wow, Awesome job and thanks so much for sharing!
Bravo à ton mari 👍👌💪
Im going to make one just like this. Thanks for the instructions. Anything you could change about the design?
I convinced my hubs to do for me 😁😁 thank you 😊
What a great idea thank you for sharing....and I think it was your husband that was doing all the work while you filmed🤣😂...what a great guy....😊
It definitely was my husband doing all the work ! I was mostly just in his way 😂
Sometimes its good to have mine around but mine always takes all the credit and it just bugs the heck out of me, just because I dont want people thinking I dont help or Im lazy so its a touchy subject for me 😳😂🤣 but I do love your turner and what you do thank you
Wow! That's sweet!
Thank you cant wait to have one soon'
Great video, perfect. Thank you both🤩
Awesome turner!! Great job on it. Is the acrylic durable with you lifting the lid up and down all the time? Go Crystalac!
Thank you so much for sharing your knowledge!
You’re very welcome 😊
Great video. Thank you
Thank you so much for sharing!
NIIIIICCCCEEEE!!😍💖🔥
What a sweet husband
Melissa do u think this could work for an already existing turner that is built. I want a covered turner and bought a 10 alternating stack before they came out with the lids and was trying to think of ways to make my own lid to attach to it. Can you ask hubs if he thinks it would be possible.
Hello, just wondering what RPMs the motors are best to be at? 2 to 3 or 5 to 6 RPMs. Thank you for your help.
Love this! Is there anything you would do differently?
Where did you get the roller bit under the pcp pipe that you have screwed into the wood? Great video by the way
Home Depot
This is great! You are your hubby did a great job. I have read good and bad reviews on the motors. How are your motors doing after 8 months of use?
They are still all working great 😊
Can you do video showing you how you connected the motor? I think I'm doing something wrong.
How did you convert to the screw off pvc?
Love this video! Thank you so much for sharing. What size did you cut the acrylic sheet to fit?
Thank you for this! I just found your channel and also went and followed you on TikTok :) Here’s a question that might sound strange, what’s the size of the Turner arm? The diameter? The reason I ask is because I’m trying to find something that I could use to spin empty wine bottles. I paint them. Thank you!
Hola muchas gracias por el video, muy ilustrativo. Me gustaría saber que materiales y tamaño compró para la modificación de los tubos de pvc. Gracias, y muchas felicidades por tener un esposo bueno y cómplice. 😊
Thank you for the wonderfully detailed video. I ordered the motors you listed and they turn in different directions. When I turn them off, they will turn in the opposite direction. Any clue as to what would cause this? When turning in one particular direction, it will cause them to unscrew.
They turn in both directions. Clockwise and counterclockwise. You would flip the on and off switch to choose which direction you want it to turn . But it should not unscrew. Does that happen with all of them ?
Quick question how would I put epoxy or sealant on the ones closest to the ends without it getting all over the sides of the wood. I guess my question is, is there enough room on the end sides to apply epoxy without making a mess? Your finished product is beautiful
There’s enough room to where the cup doesn’t touch the side wood. You can also always make the ends a little longer so you will have more space . Maybe add 3 or 4 more inches to each end .
@@MelissaCrafter thank you. I appreciate your response, I'm sorry but what is the measurement for the base? Maybe I missed that part.
Hi Melissa what is the measurement of the acrylic pieces?
Could you please
post a link for the roller castors? I can not find any
This is awesome!! What size did you cut the acrylic sheet and the two pieces of wood supporting it?
At the end when you decided to do the unscrew pvc you put a metal piece with what looks like rollers on them what are those called please
I think after that you put cabinet latches on top of the piece with the rollers that I am looking for
They are called cabinet door catch . They are from Home Depot. Here is the direct link www.homedepot.com/p/Hickory-Hardware-Catches-Collection-1-5-16-in-C-C-Cabinet-Door-Catch-Cadmium-P108-2C/202101898#overlay
How to did you know where to drill the holes and do you have the height measurement from bottom to hole or top to hole? I need to know where to drill my holes
Thank you for posting this! About how much did it cost to build the whole thing?
I bought all the wood yesterday and it costed $80
This is so cool! Love your tumbler videos. You and hubby make a great team. Do you find it gets too hot in the back? Are you planning to create ventilation or do you not need it?
I was also wondering about the motors. how hot do they get and how quickly? How long can you run them before they get too hot?
You could put a hinge on the back 3x36 to open and shut it instead of screwing it down 🤷🏻♀️
Hi, what did you place on the base of the turner case?
If I was doing 8 turners how much longer should my wood be and acrylic
Hi. I Love it!!!!! ❤ What is the difference between 2.5-3R and 5-6R?
2.5-3 RPM. vs 5-6 RPM. RPM= revolutions per minute. 5-6 spins twice as fast
How much would you say it took in total to make this approximately?
Thank you for your video, did you use common board?
why not cut and shorten the wires? then it would be so cluttered and less chance of them getting caught in the turner
I wish I had a husband that would make stuff like this for me... if I want something, I have to make it myself. :-(
How do I get to the link to all the supplies ?
What kind of plywood did you use?
Does it take longer for the epoxy to set since you have it enclosed?
What is the measurement for the enclosed sides? the wood sorry for not being clear.
Where do you get the thaing that's under the PVC pipe for when you put Heavier cups on the tuner
Home Depot. Here is the link for it www.homedepot.com/p/Hickory-Hardware-Catches-Collection-1-5-16-in-C-C-Cabinet-Door-Catch-Cadmium-P108-2C/202101898#overlay
Can you re-post your materials please?? I’m new at this and is very crafty, I want to make one this weekend 🥰
All materials are listed in the video description down below 😊
This is a great video, however it would also nice to know what screws you used. Some of the pkgs you only show for a sec and they're out of focus. Mainly the ones you use to attach the acrylic sheet. That would be great.
I will add a complete list of materials in the video description right now. I'll also copy and paste it here so you can have it. Thank you for your suggestion :)
Materials List:
(ALL WOOD USED IS 1 INCH THICK)
4- 3x10 wood pieces
2- 4x 36 wood pieces
3- 10x36 wood pieces
1- 24x36 wood piece
Corner braces 1 1/2inch:
www.homedepot.com/p/Everbilt-1-1-2-in-Zinc-Plated-Corner-Brace-Value-Pack-20-Pack-18564/202034301
3/4 inch Wood Screws:
www.homedepot.com/p/Everbilt-8-x-3-4-in-Phillips-Flat-Head-Zinc-Plated-Wood-Screw-100-Pack-801812/204275494
Drill:
www.amazon.com/gp/product/B085ZK4WG6/ref=as_li_tl?ie=UTF8&tag=melissacraf05-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B085ZK4WG6&linkId=14ba56877a5795207046e43e3d787264
Forstner Bit Set:
www.amazon.com/gp/product/B00D0B7YN2/ref=as_li_tl?ie=UTF8&tag=melissacraf05-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B00D0B7YN2&linkId=27d762f2c91cdb47c1e595edb32b31b9
Drill Bit Set:
www.homedepot.com/p/Milwaukee-SHOCKWAVE-Impact-Duty-Titanium-Drill-Bit-Set-15-Piece-48-89-4630/205879023
6 Cup Turner Kit:
6 Turner Kit (The one I bought): www.amazon.com/gp/product/B08N45GSLZ/ref=as_li_tl?ie=UTF8&tag=melissacraf05-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B08N45GSLZ&linkId=f572b740ddd4b95f95ea864c13ce24fc
6 Turner Kit with Removable Pvc Pipes:
www.amazon.com/gp/product/B085NJF86T/ref=as_li_tl?ie=UTF8&tag=melissacraf05-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B085NJF86T&linkId=e43f984c43a0499044c76e141bb52b99
Materials Used For Added Cover:
Acrylic Sheet (36x30):
www.homedepot.com/p/OPTIX-36-in-x-30-in-x-093-in-Acrylic-Sheet-MC-06/202038044
3/4 inch Wood Screws:
www.homedepot.com/p/Everbilt-8-x-3-4-in-Phillips-Flat-Head-Zinc-Plated-Wood-Screw-100-Pack-801812/204275494
32 x 3/8 in. Combo Round Head Machine Screw :
Plastic Sheet Cutting Tool:
www.homedepot.com/p/Plastic-Sheet-Cutting-Tool-GE-41/202038073
Angle Bar:
www.homedepot.com/p/Everbilt-1-in-x-36-in-Aluminum-Angle-Bar-with-1-16-in-Thick-801387/204273987
Continuous Hinge:
www.homedepot.com/p/Everbilt-1-1-2-in-x-12-in-Bright-Nickel-Continuous-Hinge-14629/203339969
Thank you for the links and list. Did you get the 24x36 wood at a lumber yard?
I'm recently getting started in this and forgive me for the probably basic question but what is the purpose of the cover?
Hi. No worries. The cover is to prevent lint or flies to land on your cup while drying .
Is I bolted to the wall
Very good tutorial except wood dimensions are not sold as instructed. Wood dimensions should be 1x3x10, 1x4x36,1x10x36 and 24x36. Last numbers of dimensions indicate length. 1st 2 numbers are as sold in hardware stiore
Y'all sounds so much alike.
Was the hinge a 12" or 24"? It looks longer than a 12"
It was 30” . Thank you for bringing that up . I did put the wrong one on the video. Here is the link to the 30” that we bought www.homedepot.com/p/Everbilt-1-1-2-in-x-30-in-Bright-Nickel-Continuous-Hinge-15175/202034057
@@MelissaCrafter thank you!!
What holds the bottles on the end of the pipe
What holds the bottles on the end of the plastic to keep them stable turning
Foam inserts. You can see it towards the end of the video. I showed the turner with no cups on it. The time frame where you can see it is 25:10. Either way here are the foams inserts. I purchased them on Amazon. www.amazon.com/gp/product/B0916ZV82H/ref=as_li_tl?ie=UTF8&tag=melissacraf05-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B0916ZV82H&linkId=b630bc288901a74cfdbb3dbabab3cc19
How much do you expend on this?
Do you have all of the dimensions written out somewhere?
Yes . They are in the video description
Do you have a material list?
Materials List:
(ALL WOOD USED IS 1 INCH THICK)
4- 3x10 wood pieces
2- 4x 36 wood pieces
3- 10x36 wood pieces
1- 24x36 wood piece
Corner braces 1 1/2inch:
www.homedepot.com/p/Everbilt-1-1-2-in-Zinc-Plated-Corner-Brace-Value-Pack-20-Pack-18564/202034301
3/4 inch Wood Screws:
www.homedepot.com/p/Everbilt-8-x-3-4-in-Phillips-Flat-Head-Zinc-Plated-Wood-Screw-100-Pack-801812/204275494
Drill:
www.amazon.com/gp/product/B085ZK4WG6/ref=as_li_tl?ie=UTF8&tag=melissacraf05-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B085ZK4WG6&linkId=14ba56877a5795207046e43e3d787264
Forstner Bit Set:
www.amazon.com/gp/product/B00D0B7YN2/ref=as_li_tl?ie=UTF8&tag=melissacraf05-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B00D0B7YN2&linkId=27d762f2c91cdb47c1e595edb32b31b9
Drill Bit Set:
www.homedepot.com/p/Milwaukee-SHOCKWAVE-Impact-Duty-Titanium-Drill-Bit-Set-15-Piece-48-89-4630/205879023
6 Cup Turner Kit:
6 Turner Kit (The one I bought): www.amazon.com/gp/product/B08N45GSLZ/ref=as_li_tl?ie=UTF8&tag=melissacraf05-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B08N45GSLZ&linkId=f572b740ddd4b95f95ea864c13ce24fc
6 Turner Kit with Removable Pvc Pipes:
www.amazon.com/gp/product/B085NJF86T/ref=as_li_tl?ie=UTF8&tag=melissacraf05-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B085NJF86T&linkId=e43f984c43a0499044c76e141bb52b99
Materials Used For Added Cover:
Acrylic Sheet (36x30):
www.homedepot.com/p/OPTIX-36-in-x-30-in-x-093-in-Acrylic-Sheet-MC-06/202038044
3/4 inch Wood Screws:
www.homedepot.com/p/Everbilt-8-x-3-4-in-Phillips-Flat-Head-Zinc-Plated-Wood-Screw-100-Pack-801812/204275494
32 x 3/8 in. Combo Round Head Machine Screw :
Plastic Sheet Cutting Tool:
www.homedepot.com/p/Plastic-Sheet-Cutting-Tool-GE-41/202038073
Angle Bar:
www.homedepot.com/p/Everbilt-1-in-x-36-in-Aluminum-Angle-Bar-with-1-16-in-Thick-801387/204273987
Continuous Hinge:
www.homedepot.com/p/Everbilt-1-1-2-in-x-12-in-Bright-Nickel-Continuous-Hinge-14629/203339969
Is all the wood 1" thick ?
Yes :)
Materials List:
(ALL WOOD USED IS 1 INCH THICK)
4- 3x10 wood pieces
2- 4x 36 wood pieces
3- 10x36 wood pieces
1- 24x36 wood piece
Corner braces 1 1/2inch:
www.homedepot.com/p/Everbilt-1-1-2-in-Zinc-Plated-Corner-Brace-Value-Pack-20-Pack-18564/202034301
3/4 inch Wood Screws:
www.homedepot.com/p/Everbilt-8-x-3-4-in-Phillips-Flat-Head-Zinc-Plated-Wood-Screw-100-Pack-801812/204275494
Drill:
www.amazon.com/gp/product/B085ZK4WG6/ref=as_li_tl?ie=UTF8&tag=melissacraf05-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B085ZK4WG6&linkId=14ba56877a5795207046e43e3d787264
Forstner Bit Set:
www.amazon.com/gp/product/B00D0B7YN2/ref=as_li_tl?ie=UTF8&tag=melissacraf05-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B00D0B7YN2&linkId=27d762f2c91cdb47c1e595edb32b31b9
Drill Bit Set:
www.homedepot.com/p/Milwaukee-SHOCKWAVE-Impact-Duty-Titanium-Drill-Bit-Set-15-Piece-48-89-4630/205879023
6 Cup Turner Kit:
6 Turner Kit (The one I bought): www.amazon.com/gp/product/B08N45GSLZ/ref=as_li_tl?ie=UTF8&tag=melissacraf05-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B08N45GSLZ&linkId=f572b740ddd4b95f95ea864c13ce24fc
6 Turner Kit with Removable Pvc Pipes:
www.amazon.com/gp/product/B085NJF86T/ref=as_li_tl?ie=UTF8&tag=melissacraf05-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B085NJF86T&linkId=e43f984c43a0499044c76e141bb52b99
Materials Used For Added Cover:
Acrylic Sheet (36x30):
www.homedepot.com/p/OPTIX-36-in-x-30-in-x-093-in-Acrylic-Sheet-MC-06/202038044
3/4 inch Wood Screws:
www.homedepot.com/p/Everbilt-8-x-3-4-in-Phillips-Flat-Head-Zinc-Plated-Wood-Screw-100-Pack-801812/204275494
32 x 3/8 in. Combo Round Head Machine Screw :
Plastic Sheet Cutting Tool:
www.homedepot.com/p/Plastic-Sheet-Cutting-Tool-GE-41/202038073
Angle Bar:
www.homedepot.com/p/Everbilt-1-in-x-36-in-Aluminum-Angle-Bar-with-1-16-in-Thick-801387/204273987
Continuous Hinge:
www.homedepot.com/p/Everbilt-1-1-2-in-x-12-in-Bright-Nickel-Continuous-Hinge-14629/203339969
Where u get mat inside machine with logo
The marble is shelf liner from Walmart & the logo is vinyl . Then I put a piece of acrylic sheet on top .
@@MelissaCrafter do u have link to acrylic sheet
It’s linked in the video description
Thanks very much. I wont do it its to much details for me and to much hole making I will get lost.
I wish I knew how to post it so you could see
Do you have instagram or TikTok? You could post a video of it & tag me. I would love to see it 😊
@@MelissaCrafter ok, I'm finishing up the cover hopefully today and will tag you when completed.
You should rent out your husband. Big bucks!
That doesn’t sound like a bad idea 🤔🤣
Can we do a husband swap! Just long enough for him to build me one! My husband is not into things like that he gets upset when I buy things that has to be put together. But he will cook and clean!
YESS! Take him lol
Are you and lilyrosecraftroom the same person,?
No
24:53 - Why did you not mention the mistake of getting the 2 outside tumbler arms too close to the outside walls? Surely, you've ruined many tumblers by now, or you stopped using those two. You could probably have helped others avoid that same mistake if you would have mentioned it.
excellent video, thank you