All this shows is how little dodge has changed in the last 15 years. Personally it doesnt matter to me, when I buy dodge I bought it for the powertrain.
I just bought a 2011 challenger v6 and I’m gonna start my full conversion in a couple weeks. 392 motor and transmission. 2015+ interior (dash board, door panels, seats, center console, steering wheel) , and front and rear bumper, 392 suspension, etc. Already got all the parts. Except the bumpers.
@@SRT_DRE Wait, how are you going to do the dash? I want to upgrade the dash front part to how the new ones look with it being digital and stuff but can't find any reference on how this would be done. Wouldn't they have to rebuild the entire interior? I just finished watching videos on removing the boring stock radio to the digital one. Which would be a nice small upgrade, but I want that digital so bad Also want to do a nice wide body on it as well, then paint or wrap matte black. Change those ugly as well and maybe a supercharger engine? I really want to hear that whine but not sure if that would work or not. What do you think? I have the 2010 dodge challenger se
@@aguythatsrandom you have to pull the entire dashboard out and put the 2015 dashboard in. Also, you won’t be able to do it unless you got a 2015+ engine because all the wire harnesses have to connect to each other. Don’t quote me on that though. Basically if you wanna upgrade the dashboard to the 2015+ model, you gotta upgrade the ENTIRE car.
@@SRT_DRE Damn, so you will be updating your whole car then? At that point I would have to just take it to an autobody shop to get that all done as I wouldn't be able to really do that on my own
My 2011 srt8 challenger has the proximity… that may be because it’s the first year of the 6.4L with push button start. Seems there are a few features 11 and up have that previous years didn’t have.
Hey Patrick watching ur videos on the tail light conversion really helps me out cause I’m far from rich I hav a couple questions cause I hav a 2010 and want to upgrade mine to 2015+.would u happen to hav the wiring diagram cause I hav no clue about electrical
@@pacopichon9443 I have a 2009, I am trying to do it right now. I don’t understand why the original wire has 3: backup lamp, park lamp, and ground. But the new plug has 4: right rear side marker, left backup lamp, right backup lamp and ground
@@maxdigitalca I have a 2012 I figured out that the harness on my trunk the two in the middle of the harness are the reverse lights then the wires on both ends of the harness where for the daytime lights also remember how he said in his video 2009 doesn’t have the sensor for the trunk lid button
Nope. I chose to keep the standard spindles on. Some of the big brake kits I’ve been looking at have adaptors for smaller spindles now. I’ll be fully upgrading down the road.
Hey great work I really really like this video because it answers a very important question regarding the fitment. I have a 2019 Hellcat and I am looking to change my 2019 taillights to the 2014 VLAND product with the sequential turn signals. Did you have any issues with flickering once you got it working since the new lights are full LED and your olds were not?
Hey brother, I want to swap to the new rear bumper covers but keep the old taillights. Do you think this is possible? Do I need to buy a new taillight surround (black plastic) or is the old one compatible with the new bumper?
i have a sxt and i have a scatpack motor ready to swap but i wanted to ask is it possible to switch a sxt 2014 challenger gauge cluster and steering wheel Dashboard cover and center console to a 2020 scatpack ( i wanna change the 2014 dashbaord and screen and center console )
did you grab 2015= taillights and adapted them to your car? would it fit in the other bumper? im considering just buying stock tailights from the 2015 and put them in my 2013 without having to buy the special Vland ones.
@@nirvanainchains9601 do you by chance remember where the fitment piece was and what it was called? I just did the conversion and really don’t like the gap and unevenness.
Check out the comments from others who had similar questions. You’re going to need wiring diagrams from your local dodge dealership for your car. Then, you need to get wiring diagrams and a vin # from a 2015+ challenger with a similar headlight setup.
@@MexicanPizzaYummy another question? if my car is the one with no hid from factory is this a problem also? or does it really matter once i get that diagram from the dealer? i just dont wanna spend stupid money on things i dont need to.
@@MrTonedagreat make sure you get a wiring diagram for a newer challenger that has a halogen setup like yours. It doesn’t matter if your headlights are halogen or HID - the conversion works the same with both.
I don't understand why u couldn't just show us what wires go where if we' are doing the same thing why do we need to thru all that if u know where the wires go?
Does it only work with the key in or out of the ignition? I know RT models were built with certain features for future models like the soft pad button on the trunk seen in post 2011 models. But considering this, I opted to not use the new button.
All this shows is how little dodge has changed in the last 15 years. Personally it doesnt matter to me, when I buy dodge I bought it for the powertrain.
Cant wait to see the interior
This is something I want to do just for fun, seems like a fun project. Plus the challengers here for sale in SoCal average 5-6k
I just bought a 2011 challenger v6 and I’m gonna start my full conversion in a couple weeks. 392 motor and transmission. 2015+ interior (dash board, door panels, seats, center console, steering wheel) , and front and rear bumper, 392 suspension, etc.
Already got all the parts. Except the bumpers.
Got mine for 7k with around 100k+ miles on it here in ny lol
@@SRT_DRE Wait, how are you going to do the dash? I want to upgrade the dash front part to how the new ones look with it being digital and stuff but can't find any reference on how this would be done. Wouldn't they have to rebuild the entire interior? I just finished watching videos on removing the boring stock radio to the digital one. Which would be a nice small upgrade, but I want that digital so bad
Also want to do a nice wide body on it as well, then paint or wrap matte black. Change those ugly as well and maybe a supercharger engine? I really want to hear that whine but not sure if that would work or not. What do you think?
I have the 2010 dodge challenger se
@@aguythatsrandom you have to pull the entire dashboard out and put the 2015 dashboard in. Also, you won’t be able to do it unless you got a 2015+ engine because all the wire harnesses have to connect to each other. Don’t quote me on that though. Basically if you wanna upgrade the dashboard to the 2015+ model, you gotta upgrade the ENTIRE car.
@@SRT_DRE Damn, so you will be updating your whole car then?
At that point I would have to just take it to an autobody shop to get that all done as I wouldn't be able to really do that on my own
Nice work, looks very good. Good work 👏
Its looking good My Brother!!!
🙏🏾 thank you
My 2011 srt8 challenger has the proximity… that may be because it’s the first year of the 6.4L with push button start. Seems there are a few features 11 and up have that previous years didn’t have.
Respect the build my 2012 has the button trunk pop thingy thing
Keep us updated man
Hey Patrick watching ur videos on the tail light conversion really helps me out cause I’m far from rich I hav a couple questions cause I hav a 2010 and want to upgrade mine to 2015+.would u happen to hav the wiring diagram cause I hav no clue about electrical
Why did u change the trunk lid? Didn’t the 2010 trunk work ?
Would of been nice for a closer view of the center tailight wire I had to screenshot what I could
Hey did you figure it out? I can’t figure it out
@@maxdigitalca yeah which year u have
@@pacopichon9443 I have a 2009, I am trying to do it right now. I don’t understand why the original wire has 3: backup lamp, park lamp, and ground. But the new plug has 4: right rear side marker, left backup lamp, right backup lamp and ground
@@maxdigitalca I have a 2012 I figured out that the harness on my trunk the two in the middle of the harness are the reverse lights then the wires on both ends of the harness where for the daytime lights also remember how he said in his video 2009 doesn’t have the sensor for the trunk lid button
@@maxdigitalca hard to explain especially when I didn’t take photos but this is what I used to figure it out myself
Nice! Did you upgrade your knuckles, spindles, etc to upgrade to slotted and drilled rotors?
Nope. I chose to keep the standard spindles on. Some of the big brake kits I’ve been looking at have adaptors for smaller spindles now. I’ll be fully upgrading down the road.
Can the dashboard also be changed to the 2015 dash?
Hey great work I really really like this video because it answers a very important question regarding the fitment. I have a 2019 Hellcat and I am looking to change my 2019 taillights to the 2014 VLAND product with the sequential turn signals. Did you have any issues with flickering once you got it working since the new lights are full LED and your olds were not?
I heard the Vland lights don’t last that long🤷♂️
@@zesusflacko they dont they peel and look like shit after 1summer
What did you do with the harness in the rear bumper that connects to the deflectors and license plate light
Did you have any issues with the mounting points from the old bumper to the new style?
Hey brother, I want to swap to the new rear bumper covers but keep the old taillights. Do you think this is possible? Do I need to buy a new taillight surround (black plastic) or is the old one compatible with the new bumper?
It’s possible, but will leave a gap. Best thing I can say is to try it. Removing the rear bumper will only take 20 minutes or so to check.
Maybe you should try a tail light conversion with the older model look. Conversions are better because of fitment unless you’re good with custom work.
Where did you get the exhaust and diffusers
i have a sxt and i have a scatpack motor ready to swap but i wanted to ask is it possible to switch a sxt 2014 challenger gauge cluster and steering wheel Dashboard cover and center console to a 2020 scatpack ( i wanna change the 2014 dashbaord and screen and center console )
Where did you find the rear bumper?
I’m wondering the same thing
did you grab 2015= taillights and adapted them to your car? would it fit in the other bumper? im considering just buying stock tailights from the 2015 and put them in my 2013 without having to buy the special Vland ones.
They'll hook up but there'll be a gap, you can buy a fitment piece that you can put in the gap.
@@nirvanainchains9601 do you by chance remember where the fitment piece was and what it was called? I just did the conversion and really don’t like the gap and unevenness.
@@nirvanainchains9601 what fitment piece can i buy for the gap in tail lights
i have an 09 i want to put the 15 bumper on and taillights whats all the wiring that had to be changed or etc
Did u have to swap to 2015+ trunk ??
Where did you get the front end hellcat style
eBay. Just put “hellcat front bumper” and kits should pop up.
Are you swapping the interior too?
Yes
Hey can you help me out man, I want to do the same exact thing with my 2010 Dodge Challenger
I could use your help with my 2010. I put a 2015 front end on it now the headlights. How do I convert them?
Check out the comments from others who had similar questions. You’re going to need wiring diagrams from your local dodge dealership for your car. Then, you need to get wiring diagrams and a vin # from a 2015+ challenger with a similar headlight setup.
@@MexicanPizzaYummy another question? if my car is the one with no hid from factory is this a problem also? or does it really matter once i get that diagram from the dealer? i just dont wanna spend stupid money on things i dont need to.
@@MrTonedagreat make sure you get a wiring diagram for a newer challenger that has a halogen setup like yours. It doesn’t matter if your headlights are halogen or HID - the conversion works the same with both.
Wide body kit from what company bro
Got it off an aftermarket company on eBay.
You doing all that mine as well just get the 2015
It's difference between building a car you own and paying a carnote
Show us an update
I don't understand why u couldn't just show us what wires go where if we' are doing the same thing why do we need to thru all that if u know where the wires go?
How did u get your wheels to pop out?
wheel spacers
My 2011 challenger rt the trunk button works
Does it only work with the key in or out of the ignition? I know RT models were built with certain features for future models like the soft pad button on the trunk seen in post 2011 models. But considering this, I opted to not use the new button.
So 2010 challenger miss the deadline the trunk button to work
@@keitronadams5386 The 2010 SE models to be exact.
Dirty 🦍