Expert Tips for Maintaining Your Lambretta GP 200 Carburetor Manifold
Вставка
- Опубліковано 19 сер 2024
- Get ready to upgrade your Lambretta Li 150 with this detailed exploration of carburetor manifolds! In this informative video, we dive deep into the world of Lambretta upgrades and show you step-by-step how to install a carburetor manifold on your Li 150 scooter. Learn all the tips and tricks for a seamless upgrade that will boost your scooter's performance to the next level. Whether you're a Lambretta enthusiast or a DIY mechanic looking to take on a new project, this video has something for you. Watch now and unlock the full potential of your Lambretta Li 150! The GP200 was the last of the great Lambretta scooters that rolled off of Innocenti's production line in Milan. Produced from January 1969 until April 1971 it is said a total of only 9350 DL/GP200's were made and less than 1000 were electronic the versions. The new model adopted a revised engine displacing 198cc producing 10.75 bhp at 5700 rpm housed in the TV175 cycle parts and would prove to be the quickest production Lambretta built to that point with a top speed 70 mph.
The GP/DL range supersedes all LI, Special, SX and TV models in 1969. In most countries the models were marketed as Lambretta DL, while in the UK the distinctive label Grand Prix (GP) was used similarly to the earlier GT, to create a link to the then booming Grand Prix racing. This relation is reflected by the adverts and slogans of the time (“A real goer!”) and perfectly suits the sporty appearance of the scooter. The DL / GP range was available with the usual three capacities, even if the engines had been significantly reworked.
The new bodywork, styled in the famous Italian automotive design house Bertone, is shorter and slimmer than before. The legshields and horcasting have been shortened to lower the handlebars, headset and headlight are now rectangular. The front mudguard has a more aggressive pointed shape, forks, hubs and wheel-rims are now painted silver as standard. The taillight is made from black plastic as all other plastic parts are coloured black, while any chrome has been completely abandoned. The plain side panels have black rally-stripes attached and incorporate grilles which are also made from black plastic.
The DL 125 takes over the engine of the 125 Special. Engine numbers still start with LI125S. Besides the rear sprocket, which is no longer riveted together but made from billet steel, the main change is the crankshaft, which features a much stronger taper to take the flywheel. Also, the drain valve on the inlet rubber hose was abandoned.
Even if the DL 150 engine also retains the engine numbers of the SX150, changes are much more refined: in addition to the aforementioned changes, the port layout of the cylinder is altered. Also, a larger carb with 22 mm bore is used, which does not raise peak power delivery very much (9,4 hp), but increases the useable rev range.
Also the 200 cc engine still bears the SX200 engine numbers, even if a number of significant changes are made. The improvements to crankshaft and inlet rubber hose are the same as with the smaller models, but the gearing is changed completely to a much shorter overall ratio (5,22 instead of 4,80 on the SX). The gearbox was taken over from the LI 125 Special, but primary gearing was reverted to a 18/47 sprocket ratio. The engine now keeps up speed much better even under adverse conditions and reaches 110 kph top speed with greatly improved acceleration. A 22 mm carb is used as on the DL 150.
But the ultimate improvement for the DL 200 was the introduction of an electronic ignition, which was developed in co-operation with Ducati. The DL 200 Electronic is easily recognised by a sticker on the legshields and for the English market also by a different and sportier seat. This newly shaped seat with its structured cover is a clear reminder of the 70s sports car interiors. Unfortunately no production numbers of the Electronic are known, as it was produced from 1970 onwards alongside the standard version with points ignition.
Also colour schemes are changed drastically. The late 60s fashion of colourful designs is taken over, so that the DL 125 is available in turquoise or white colour. The DL 150 is sold in Italy in red, whereas some export-markets receive two-tone colour schemes. While the basic colour is always white, side-panels, horncasting and mudguard are available in red or blue. The DL 200 in Italy is available only in ochre, while customers abroad can chose from either ochre or red.
During the short production run, some minor changes are made. Early models have the horncasting cover and rear frame grille painted in the same colour as the rest of the bodywork, while later these parts are superseded by black plastic items. Also the alloy choke and petrol tap levers and the grey plastic glovebox are being replaced by black plastic versions. The very latest models had screws M6 x 30 instead of nuts and bolts to hold the chaincase cover.
Hurrah
Hello, I really liked the explanatory video, could you answer a question? If I put a 150 carburetor on a manifold with a small opening and the piston is a 200, it will lose power due to the small intake.
Yes. It will lose power because the intake ratio of air fuel supply will be reduced. 150 carburetor intake dia is 19mm only. The intake dia of manifold plays crucial role in operation of engine👍👍👍
Hi, I have a Lambretta 1967 and want to get it restored. Can you help me?
Glad to hear from you. I am a lambretta enthusiast. I have some lambrettas with me. With my knowledge I am posting videos so they may be useful to the lambretta lovers. I am a Marine Engineer (Submarines) In reality. I don't have any lambretta business including restoration. Thank you 🙏❤
Your location? City and State