@@happybleeding I know.....I refuse to use C Clamps.....and vice grip clamps are not real cherished either....I am building 5x6x2.5 foot display frames for Redbull from 1.5 inch sq aluminum, I use 50 Bessey clamps to clamp the 5x6 foot panels...and just as many to clamp the whole thing .......if I do not, and try to tack, it gets so wrapped, I have to cut apart and redo......MIG with a spool gun....here is a link....let me know what you think.....Paul...ua-cam.com/video/iMjwELGoUc8/v-deo.html...ua-cam.com/video/2ohRps43dLQ/v-deo.html...ua-cam.com/video/huiArtftJ0Q/v-deo.html...ua-cam.com/video/HKBx9kzLv0g/v-deo.html
@@happybleeding thanks so much, the music is all free stuff form UA-cam...I just grab a tune, and then add the photos to that.....for the tings I have been making, they need clamping as tacking does not give the precision I need.....it takes awhile to figure where they all need to be, but in the end, every thing icomes out square....most of the time...ha...thanks for watching and commenting...Paul
Dogs love to help......be careful welding near glass, it is amazing how fast pits appear from the smallest spark hitting them...... ask me how I know, and never sandblast near glass......kaboom....one grain and the tempered glass is gone in a flash..... love your camera work and editing........well done....Paul
Don't take this the wrong way, but that bottom bend was a bit too much. Maybe space out 2 to 3 cuts a few inches apart for a smoother transition so it doesn't leave a kink. Love your channel and great work.
Thanks Yakswelding , Yeah the bend was pretty severe I ended up Grinding the corners down and filling it with weld so I can finish grind it so it will look smooth It will be on one of the later videos, you got a great eye dude!
@@happybleeding I am a Native, but lived 5 years in Hollywood for work, it sucked....lived in Ohio , too cold, moved to North Carolina, too many bible thumpers.....back to Florida ......it all depends on what you are doing.....the grass is always greener over the septic tank if you know what I mean.,,,,,some parts of Florida in the rural areas are fantastic....Ocala, [hilly and lots of old oaks ] north up near Georgia.....around Orlando, it is\has gotten very expensive....many retirees from the north are driving prices up.... costal areas are nuts, but a few miles inland are ok...and we have a big coastline......lots of humidity here, not much snow....except in the Miami Vice shows......shoot me an email....best regards, Paul...
Yeah California is great except the prices ,ive pretty much lived here my whole life , kind of thinking of relocating but im not sure where to go, The dog we are watching (the one in the videos)owners are in Florida right now we were thinking of possibly taking a trip to drop him off but I have to keep working, if we end up coming out your way, I will let you know we could talk shop!
Nice work-how many hours you got into that? Dude must be a friend...or a rich client. No criticisms at all here your technique is flawless but you do need a plasma to speed up them cuts. Keep it up.
Whats up Scott! Ihave a plasma just didn't want to drag it out, Yeah the rack is for a freind , ive about 5 or 6 days in on the rack ,ladder and still have some side steps to fab up, thanks for supporting the channel!!
@@happybleeding np. I am hurting badly my service truck trans is slipping. And not worth fixing. Had no work since last video not even repair kit for the carb
Hey Chris! Man Im sorry to hear that!do you think you'll get a different truck? I mean you have the expertise to fix the trans it might be worth it. or maybe try and get a different truck.work has been slow it will pick up, you could try some of that Lucas and see if it helps you get by for now.
Hey friend. Northern Michigan here and you did you disconnect the battery? I'm not here to police your video. Not even close! Just very curious. I welded on a trail blazer some years ago... before I even heard of such a thing and had no issue. Nowadays I tend to disconnect.
Yeah I also always disconnect the battery , But I have not in the past and never had a problem, but Id rather not find out the hard way , Ive heard horror stories of people frying their computers . Thanks for supporting the channel!
great stuff....thanks lor sharing, cheers from Florida, Paul
Thanks Paul!
Awesome job notching that tubing.
Thanks
@mlieser1230!
I love the way you use your Besseys, I do the same thing holding the vertical and letting them slide down....Bravo
Yeah I love those things man , you can never have to many clamps!
@@happybleeding I know.....I refuse to use C Clamps.....and vice grip clamps are not real cherished either....I am building 5x6x2.5 foot display frames for Redbull from 1.5 inch sq aluminum, I use 50 Bessey clamps to clamp the 5x6 foot panels...and just as many to clamp the whole thing .......if I do not, and try to tack, it gets so wrapped, I have to cut apart and redo......MIG with a spool gun....here is a link....let me know what you think.....Paul...ua-cam.com/video/iMjwELGoUc8/v-deo.html...ua-cam.com/video/2ohRps43dLQ/v-deo.html...ua-cam.com/video/huiArtftJ0Q/v-deo.html...ua-cam.com/video/HKBx9kzLv0g/v-deo.html
man talking bout a lot of clamps !!!!
I love your channel Man!
really enjoyed the photography and moon , also is the music yours?
love the vibe!
@@happybleeding thanks so much, the music is all free stuff form UA-cam...I just grab a tune, and then add the photos to that.....for the tings I have been making, they need clamping as tacking does not give the precision I need.....it takes awhile to figure where they all need to be, but in the end, every thing icomes out square....most of the time...ha...thanks for watching and commenting...Paul
Nice job, put a skill saw on you list of tools to get, big time saver, you'll love it. Keep em coming, love your helper
Thanks David! slowly adding to my tool box ,yeh he's a good helper need to show him how to use the grinder,Lol
Dogs love to help......be careful welding near glass, it is amazing how fast pits appear from the smallest spark hitting them......
ask me how I know, and never sandblast near glass......kaboom....one grain and the tempered glass is gone in a flash.....
love your camera work and editing........well done....Paul
Yeah Ive gotten spatter on my windshields before , and it suckd!
Thanks for the positive feedback Paul!
@@happybleeding hope you are staying dry.....you need the rain though...Paul down in Florida....
yeah almost got stuck in a mudslide on Monday and tore up my wife's crv , we definitely need the rain, just no one in cali is ready for it lol
@@happybleeding like our hurricane season here....we dodged 2 bullets in Orlando....down south got hit very hard...
Looking good, try to stay safe and dry
Thanks John!
Don't take this the wrong way, but that bottom bend was a bit too much. Maybe space out 2 to 3 cuts a few inches apart for a smoother transition so it doesn't leave a kink. Love your channel and great work.
Thanks Yakswelding , Yeah the bend was pretty severe I ended up Grinding the corners down and filling it with weld so I can finish grind it so it will look smooth It will be on one of the later videos,
you got a great eye dude!
real fun music track you have going too....
Thanks Paul!!
@@happybleeding you are dong a great ob with your videos....wish I still lived in California, I would love to chat....cheers, Paul
how do you like Florida ? Im kinda over Cali,
really expensive out here.
@@happybleeding I am a Native, but lived 5 years in Hollywood for work, it sucked....lived in Ohio , too cold, moved to North Carolina, too many bible thumpers.....back to Florida ......it all depends on what you are doing.....the grass is always greener over the septic tank if you know what I mean.,,,,,some parts of Florida in the rural areas are fantastic....Ocala, [hilly and lots of old oaks ] north up near Georgia.....around Orlando, it is\has gotten very expensive....many retirees from the north are driving prices up.... costal areas are nuts, but a few miles inland are ok...and we have a big coastline......lots of humidity here, not much snow....except in the Miami Vice shows......shoot me an email....best regards, Paul...
Yeah California is great except the prices ,ive pretty much lived here my whole life ,
kind of thinking of relocating but im not sure where to go, The dog we are watching (the one in the videos)owners are in Florida right now we were thinking of possibly taking a trip to drop him off but I have to keep working,
if we end up coming out your way, I will let you know we could talk shop!
Nice work-how many hours you got into that? Dude must be a friend...or a rich client. No criticisms at all here your technique is flawless but you do need a plasma to speed up them cuts. Keep it up.
Whats up Scott!
Ihave a plasma just didn't want to drag it out,
Yeah the rack is for a freind , ive about 5 or 6 days in on the rack ,ladder and still have some side steps to fab up,
thanks for supporting the channel!!
Good video keep up the good work
Thanks Chris!
@@happybleeding np. I am hurting badly my service truck trans is slipping. And not worth fixing. Had no work since last video not even repair kit for the carb
Hey Chris!
Man Im sorry to hear that!do you think you'll get a different truck?
I mean you have the expertise to fix the trans it might be worth it.
or maybe try and get a different truck.work has been slow it will pick up,
you could try some of that Lucas and see if it helps you get by for now.
@@happybleeding it is not worth fixing due to the frame is rotted and has alpt more issues. I haven't had any work this week
Wonder if there is a need for some Polyurethane Bushings between the frame and van or is it attached directly.
Im going to put some rubber bushings in to keep vibration /noise down.
Hey friend. Northern Michigan here and you did you disconnect the battery? I'm not here to police your video. Not even close! Just very curious. I welded on a trail blazer some years ago... before I even heard of such a thing and had no issue. Nowadays I tend to disconnect.
Yeah I also always disconnect the battery , But I have not in the past and never had a problem,
but Id rather not find out the hard way , Ive heard horror stories of people frying their computers .
Thanks for supporting the channel!