Everything in its Right Place - Radiohead - Korg Volca Sample 2 Cover Tutorial
Вставка
- Опубліковано 9 лис 2023
- Learn how to recreate "Everything in its Right Place" by Radiohead using the Korg Volca Sample 2. This tutorial takes you step-by-step through the process of programming the synth parts of this electronic classic using only the factory samples. No additional samples or external gear needed - just the power of the Volca Sample 2!
"Everything in its Right Place" by Radiohead
Instrument: Korg Volca Sample 2
Key of F minor
BPM: 124
Swing: 25
Reverb Mix: 60*
*Note: I forgot to turn the reverb on! But I think it sounds fine either way ツ
Factory Samples Used:
Part 1: Sample 001 - Kick Dusty - Hi-cut 60; Decay 60
Part 2: Sample 102 - Vintage Pad - Hi-cut 90; Decay 90
Part 3: Sample 127 - Bass UnisonSyn - Hi-cut 90; Decay 90
Part 4: Sample 127 - Bass UnisonSyn - Hi-cut 90; Decay 90
Part 5: Sample 127 - Bass UnisonSyn - Hi-cut 90; Decay 90
Part 6: Sample 127 - Bass UnisonSyn - Hi-cut 90; Decay 90
00:00: Full Song
01:38: Intro
02:17: Sample Setup
02:45: Patterns 1 & 4
12:29: Patterns 2, 5, 8 & 11
16:00: Pattern 3, 6, 9 & 12
20:38: Pattern Chaining - A Section - Patterns 1-6
22:07: Patterns 7 & 10
23:41: Pattern Chaining - B Section - Patterns 7-12
24:35: Pattern 13
27:28: Pattern 14
30:00: Patterns 15 & 16
31:12: Pattern Chaining - C Section - Patterns 13-16
32:46: Song Structure
33:25: Outro
#korg #volcasample #volcasample2 #radiohead #kida #synth #synthesizer #electronicmusic #musictutorial #musicproduction
youre a legend for posting this, ive had volca for 1,5 years and i only just found out about chains . absolutely mind blown
Volca Sample is my favorite little sampler. I’ve had one for years and I’m still learning new tricks all the time. I’m glad you enjoyed it.
that's dope, thx!
Glad you enjoyed it! Thanks for watching.
That was amazing, Fantastic!!
Thanks for watching!
Very cool and superb tutorial. Thank you.
You're very welcome! Glad you enjoyed it.
Nice work ! The kick make me want a dance !
Thanks! Dance on!
Wow this was a great tutorial on a very difficult song to program on the volca!
Thank you! I appreciate the kind words.
Thank you for sharing! Nice job, it could be played on stage with the band. 😊
Thanks for watching! I’m glad you enjoyed it.
This was fantastic! This taught me how to use a lot of super useful features I didn’t even know the Sample 2 had, instant sub. Do you think you could do a tutorial for Amok by Atoms for Peace?
Thanks! I can certainly give it a shot. ✌️
This is simply amazing. It explores every aspect of the Volca 2 in such a creative way. I will give it a try later although I think its gonna take me some time haha. Would you mind to cover any Aphex Twin song?
Thank you! I will give it a shot. ✌️
How in the world did you do this bearing in mind RH’s insane time signatures??/ instant sub 👍 ❤❤
Thanks! I’m always looking for a challenge.
We saca mas
Thanks for watching! Stay tuned!
👍
Thanks!
can this be done on a volca sample 1 as well?
Yes. I believe it can be. However, the factory samples are not the same so you’d have to find ones that work. As long as the samples are playing a C note (use a tuner) all the note value changes will be the same. Hope that helps.
The parameters changes per step described on sec 5:30 does not work on my volca v1 :/
Does anybody knows if this is a matter of firmware or something? When I start mine, shows 1.43
I don’t have a V1 to check but my understanding is that the functions are the same. Let me know how it goes!
Actually it is possible to make it. The difference is the interface display and some ways to make their gestures. A little bit confusing
I just want to listen to the beat. Is it available anywhere.. cause theres no way in hell i can follow this tutorial. Way too complicated.
It’s available on my IG page and will be coming to YT Shorts soon. ✌️