No Heat Service Call Unit Fires Up & No Air Flow
Вставка
- Опубліковано 8 гру 2021
- I am on a no heat service call. I get there and I think it’s kind of odd I feel some heat coming out of the inducer. I looked inside the unit and units not starting out. I check the pressure switch is closed. Then unit fires up runs alittle while and goes out. The limit shuts the gas off and blower not starting up. I find the wire going to the capacitor for the blower motor was disconnected and against the blower housing. I replaced the wire connection. The blower motor still wouldn’t start. The motor was really hot and off on overload. Therefore I have it time to cool off. After the motor cooled off the unit fired up and the blower started right up. A repair job where no parts needing to be replaced. My favorite kind of repairs
I always like to recommend a blower motor replacement when that kind of stuff goes down, just in case. Thanks for the video.
clean filter and wire off the capacitor looks like you can thank the pm guy for that service call.
Good catch easy fix
Good catch on this one
Good job Hacker.
Good one Hackster 👏👍✌😎
Nice fix
Thanks
I don't have any of that model of Lennox furnace still out in the field. I condemned the last one a few years ago for a cracked heat exchanger. The guy was wanting to have his buddy welded. So I disconnected the unit in several ways so that it would not run, just to cover my butt. Merry Christmas Bill. I hope Santa brings you something good this year. 🎅👍
Lennox made some weird shit back then.
And that's for carbon monoxide poison ?
Up and rolling .. Good Video 👍
Hackmister thanks for the videos, but you should always test for voltage everywhere before touching anything some rooftops can have two service disconnects.
🥃🥃🍺🍺🍺🏌🏻♀️🎯
Stay safe.
Retired (werk'n)keyboard super tech. Wear your safety glasses!
As cousin Ave would say, tappy tap tap
Should have removed that Moudaber nest.
Steve Lav says a lot of things 🤣
👍
Hey bill what type of camera do you use?