The “Boss’s” LS Powered Burn Out Car Needs Way To Much To Finish!
Вставка
- Опубліковано 18 тра 2024
- Help support the channel buy Robby Layton T-Shirts, Hats, Patches, Stickers:
www.robbylayton.com
#winwithholley
Subscribe: / robbylayton - Авто та транспорт
Shawn is a great addition to the crew, everyone is learning a lot from him.
Hopefully we’ll get to hear about Shawn, his history, and we’re he learned his expertise.
he's stepped up everyone's game
💯% FACTS
Hill Billy is really coming along as a fabricator. Shawn is very talented and humble. That makes him a great teacher
Sean is an awesome addition to your crew robby! He can do everything i wish i could without even thinking about it!!!
That Van race was awesome! Well done the whole team!
Looking good guys. I love that you all are learning how to fab from Shawn and that he seems to be enjoying teaching you guys. Hands on experience is the best way to learn. Keep these awesome videos coming. Thanks from your buddy Russ from over the hill.
Whatever Shawn is making. Pay him more.
My vote...thumbs up for the next vote.
This is the BEST SERIES on UA-cam right now. I am loving this build. ❤❤❤❤
It's awesome to see the newest person on the team has brought so much knowledge they are willing to share/teach that they leveled ya'll up to a new standard in quality and work.
You can tell how much Hillbilly is absolutely loving doing this and his relationship with Shaun... cause he's barely stuttering his enjoyment is quite literally flowing from his mouth, his confidence in what he's doing is literally oozing from him, feckin love it!!😎😉
Sunday is best day. Robby and Matt post
Psst. They both post on Wednesday's and Friday's too...
Robby, matt and fabrats 🎉
Robby, Matt, Fabrats, Tom Tom 👌👌🇰🇪🇰🇪
Hillbilly is a definite crew member. His talents are not replaced easily. And he loves to learn. That’s impressive. He worked well with Colt. Now he’s working well with Shawn. Go Hillbilly. We love your energy
2:00 THE PACER RACER
Shawn is the quite type but what a great new asset to the shop he is. Hillbilly getting better and better! Love how this channel evolves. Greetings from Austria!
Cody is doing some phenomenal bodywork. Shawn is keeping the great suggestions coming, Hillbilly is doing a great job fabricating, and Colt is
getting better all the time! Robby's getting better at Tig Welding and Fabricating! Great Job You All!
Thank heavens Shawn and Hillbilly carried on while the "cats were away!" I agree that this is the best build going on on YT at this time.
Shawn has really bought alot to the table, what is really great to see how Hillbilly and Shawn work well together and Hillbilly is really interested and wanting to learn from him.😊
Thank you Robby and crew for the update on the BOSS Pacer ! Everyone is really coming along very well with trying and learning new stuff ! Big thumbs-up !
Robbie you so need a foot print gas pedal for the pacer
thank goodness Robbie is back! we missed you.
That Pacer is really starting to become a beast. Great job everyone. 👏
This is the best fabrication video y'all've done in quite a while, maybe ever. Great job.
Shawn in the background is awesome! Like a young Ed that is a master metal fabricator and straight man.
Cleetus and Motion Industries offer a short length 90° split intake for dual turbos. You don't have to make those extreme time consuming things anymore.
To the silent "assassin" this build is wild, whoever taught you, did a damn fine job.....thankyou Robby and the "Boss".....
Love your entire crew! Shawn (Sean?) is really getting more comfortable with the camera, but also Cole is super at it now!
That color on the rear end is just FIIIIRRRREEEE
You should race cleetus you guys got this!
what started out as a AMC Pacer is becoming a real hot Car....!
Next will be NPK......😂
I know that fabrication coincides with body work more often than not but you guys are getting much better at it as time goes on. Even not counting Shawn.
Man you guys have stepped up your game. This is awesome. Really enjoy watching this build. It's on my bucket list to meet you guys one day. Keep up the great work
I am loving this build! Wouldn't surprise me to see at SEMA!
Nice to see Steve still working to,pay businesses bills.
Love you all. Robby , please get a nice bandsaw to easily and precisely cut all the nice pipe you are learning to weld.
Keep up the great work. Enjoy the moment!
Great job guys. Thank you 😊
Teamwork makes the dream work.
No offense But everything I've heard that saying it came from the laziest person on the team!
@@garyduquette1784 Is your nickname "blister". Cause you show up after the work is done.
All you guys are knocking it out doing a great job.
Whenever you see Shawn standing around. He is always looking down to the ground in deep thought. lol. (TS)25:06
Shawn's skill level is crazy
Sean is beginning to question his life decisions after having seen the pink read end😳😬😁
The Boss is going to get one sweet ride! Can't wait to see it all painted and ready to rip!
Very much enjoyed this video. Furious “pace” keep up the great work.
Homeboy did a nice job on that gas tank notch. U guys are awesome
Nice work Guys Coming along Nicely
dish soap can eat rubber over a year or two.
at my previous work, someone used dish soap as lube to pull cable through conduit.
2 years later the cable failed as the dish soap ate the insulation on the cable.
WOW !!!!!! You guys are doing some amazing fabrication work on so many levels
Enjoying the give and take between Sean and Hillbilly
Thanks for sharing 😀👍
Good man, HillBilly! It's nice to be that guy who isn't afraid to make a decision, right or wrong.
It was awesome seeing you at TMS this past weekend, love how the Pacer is looking, love the $100 Hat gag
The Boss, Robby, Colton, Cody, Shaun, Hillbilly what a great team. One thought, would better enjoy videos under 30 minutes.
Gotta love a good build and the last minute thrashing 😎👍
You can do it!
Cause your Robbie Layton and your whole nation is behind you.
Dude Sean was a great addition!!
damn boys i know yall do good paint but yall are killing it this burn out ride is next level from the derby fab work keep up the great content
That notch was perfect cut to install the baffler 😂
Nice job plumbing up Twin Turbos ur first time..looks great..
Pink isn't exactly my favorite color, but that new housing looks really cool. The pearl really brings
the color to life...
You did a great job on your first turbo kit!
In today's episode Hillbilly does CAD "Cardboard Aided Design"
Genius Sean!!
The boss Demri will have the best looking ride there .😊
Is there anything this Robby Layton Nation can do to make Shawn feel more loved on camera? We LOVE YOU MAN! You are more awesome than we deserve. If you feel odd on camera...that's how it works. We love seeing you. You are an awesome person and we are lucky to see you talk.
Cody comin in clutch
great as always great content
Back in college I used a different technique to penetrate firewalls! 🤣
F/A you have a good crew brother, and an awesome addition to the family (the Quite Guy)
That gas tank notch is impressive!!!
So the Pacer will be the most beautiful burnout car on the pad. And most propably the most beautiful burnout car on the pad with a blown engine... 😜😁🤟
Not to mention its beautiful driver!
If you blow it build it bigger
Sean and Hillbilly are killing it! ❤
Keep up the good work ❤
Best team on the Cartubes!!!
It’s coming together very nice 👍
Good video guys
Looking good guys
Your team I really coming together I’m impressed with your progress
Yes a Cody segment!!!
Was Shawn from around the area? Great worker and metal man.👍♥️. Hard to find men that have good working and technical skills.
That looks sweet. I love it
That's the prettiest REAR-END I ever seen! 🤟😎👍
That thing is gonna be SICK
Wow, that is a HUGE build :D
Want back story on Sean he is definitely a master fabricator plus some he's a keeper for sure robby
Hey robby, I'm glad that you're doing everything you can for your boss lady. I guess we're cut from the same cloth because I would truly do anything for my boss lady as well. LOL! Everything is coming out great. Keep up your great work and videos robby and crew.
Congratulations Robbie you just became a pipefitter thats what I did at a shipyard building USNavy ships great job keep up the quality builds
What ? No Band Saw ! More progress and looking good ! Thanks for sharing !
We can’t keep a blade in it and haven’t had time to figure out why
@@RobbyLayton . Call someone in to look at it .
👍 Looking Good 👍
Seans idea for the gas tank is top notch 👌
Since the Pacer isn't ever going on vacation it needs no trunk for suitcases LOL
Another great episode...
That’s a nice looking rear end !
Hell yea got a body work with cody segment in this video!
Awesome video
Yeah! Cody is here
Welcome back Cody
Robby, you got yourself a great 'motley' crew 👍😎✊
Hey Bobbie. How about making adjustable gas and brake pedals so the seat works for you and the boss.
A metal cutting Bandsaw will make those tubing cuts easy. Straight cuts to compound miter cuts.
Should have a custom made shop shirt like yours but change the black to pink for the boss.
Sean is incredible! The tank mod to miss the rollbar was insane. Loving the build. I hope the front suspension can handle wheel stands on launch? jim
Better hurry! Lookin good
8:24 - I'm ignorant, so help me out here: should there be a flexible piece somewhere in that "hose" assembly so vibrations don't eventually fracture / break that "hose"?