SIERRA SILVERADO 4X4 GRINDING / CLUNKING NOT SHIFTING CHEVY GMC K1500

Поділитися
Вставка
  • Опубліковано 1 лют 2025

КОМЕНТАРІ • 22

  • @kevinbergen4309
    @kevinbergen4309 10 місяців тому

    I'm going through the same sound right now on a 96. Great job on your diagnosis.

  • @JBD901
    @JBD901 9 місяців тому

    My 85 S15 makes the same exact sound, so I am also leaning towards this being the issue before assuming its a transfer case/front diff issue.

  • @mikebalgaard9284
    @mikebalgaard9284 3 роки тому +1

    I really like your pickup and because it's a extra cab

  • @snsmowingservice998
    @snsmowingservice998 Рік тому

    Thank you for the vid!!

  • @ivariverson3256
    @ivariverson3256 2 місяці тому

    New Cv Joints Mabey?

  • @Mike-su8si
    @Mike-su8si Рік тому +1

    Ours is good its something broke in the front differential

  • @txcarnage8179
    @txcarnage8179 4 роки тому

    Thank bro you helped me out

  • @BullProspecting
    @BullProspecting 2 роки тому +2

    Mine does it in 2 wheel. The sound comes and goes?

    • @bryancarboni4493
      @bryancarboni4493 2 роки тому +1

      Same here

    • @BullProspecting
      @BullProspecting 2 роки тому +2

      @@bryancarboni4493 my four wheel was stuck. I used the 4 wheel drive in a snow storm the other day and after using it the sound stopped. But now out of nowhere it will pull a tiny bit to the left out of nowhere. It freaked me out. I'm gonna get it looked at when I get the money. When I do I'll let you know what it was!

    • @bryancarboni4493
      @bryancarboni4493 2 роки тому +1

      @@BullProspecting awesome thanks bro

    • @rdhernandez5
      @rdhernandez5 2 роки тому +1

      Following. Mine happens under 40mph, intermittently. Same sound though

    • @bryancarboni4493
      @bryancarboni4493 2 роки тому +3

      Okay so pull ur drive shaft out and there should be 4 bolts on the tail shaft of the transfer case take the housing off and there should be a broken snap ring that was my problem simple easy cheap fix

  • @MrNonStopOrator
    @MrNonStopOrator 2 роки тому

    I have a 97 with dog leg shift and when I had it in neutral and went to shift to 4low it was grinding and didn’t want to go in so I just turned the truck off and then went to park, do I do anything wrong got any information? Thank you!

  • @tabithajones3560
    @tabithajones3560 4 роки тому +1

    spline on one or the other is stripped u can tell by the noise its making

  • @benjaminheide295
    @benjaminheide295 4 роки тому +1

    Now i know whats wrong with my 95 silverado, makes the exact same noise when the rear wheels break loose in 4wd

  • @MsJonErik
    @MsJonErik 2 роки тому

    Just my problem👍was under today

  • @2007dalin
    @2007dalin 6 років тому +2

    i had a shaft like that rebuilt at a machine shop.. was probably 200 bucks

    • @syxxes
      @syxxes  6 років тому

      Might do that

    • @k.orange7156
      @k.orange7156 4 роки тому

      Yup I had one built for about the same , was under 300 .

  • @luisanaya9327
    @luisanaya9327 6 років тому

    mine run and drives its a 95 v6 but rough idles and dies when i hit the brake sounds like it spits fuel n dies . changed the egr valve. iac valve. ignition coil. ignition control module . spark plugs . fuel pump . spark plug wires. fuel filter . dont know what it could be 😒

    • @syxxes
      @syxxes  6 років тому

      If you've done all that, maybe a timing issue?