QT#3: Using Nvidia MODS (MATS) memory diagnostics program

Поділитися
Вставка
  • Опубліковано 17 лис 2024

КОМЕНТАРІ • 278

  •  3 роки тому +47

    youre a saint, some techs here in brazil want to hide these tools from the other repair shops, thank you for this video

    • @DAplayerGAMES
      @DAplayerGAMES 2 роки тому +4

      sim cara, ta doido, to a 4 hroas procurando esse software por que vi de relance num video da getech.

    • @blacklod4985
      @blacklod4985 2 роки тому

      @@DAplayerGAMES what

    • @mundocurioso4715
      @mundocurioso4715 2 роки тому

      faz um video teu la po

    •  2 роки тому

      @@mundocurioso4715 ja tem uns 4

    • @josealmeidacc7
      @josealmeidacc7 Рік тому

      And how to count when we have VRAM on both sides of the PCB?

  • @OCXChile
    @OCXChile Рік тому +2

    Now MATS is a MUST if you want to purchase a 2nd hand Mined card. Good explanation. Regards

  • @LSDale
    @LSDale 2 роки тому +7

    Hi, I am currently teaching myself GPU repair and your tutorial has helped me immensely. Thank you very much for posting this.

    • @josealmeidacc7
      @josealmeidacc7 Рік тому

      And how to count when we have VRAM on both sides of the PCB?

  • @rileyboomer8627
    @rileyboomer8627 Рік тому +3

    9:40 test a GPU with working video output
    13:40 test a gpu with no video output
    16:10 determining the failure mode

  • @WTFleochan
    @WTFleochan 3 роки тому +4

    Great video, really appreciate your work, it save lots of my time to identify what is the problem with my video card

  • @S4von
    @S4von 3 роки тому +7

    so what should I use to really find any errors on my gtx 970?
    First I used mats -e 5 |less
    just like you, and it showed me some errors, I tried it again and there were no errors, then I tried mats -20 and no errors, so why there were errors in the first try? What parameters should I use to make sure my card is working properly?

  • @BryantAvant
    @BryantAvant 2 роки тому +7

    Where can I download the MATS/MODS tool?

    • @BoggyBogdan
      @BoggyBogdan 2 місяці тому +1

      the most obvious thing, and no links here.. wtf

  • @Friend_of_the_One-Eyed_Ladies
    @Friend_of_the_One-Eyed_Ladies 3 роки тому +6

    Correction: PCIe slot orientation has nothing to do with VRAM bank order. On some cards (Zotac, etc.), the GPU is oriented sideways. Just look at the lettering on the GPU. With the card turned so the GPU lettering is upright, your memory channels start at the bottom right and run counterclockwise. Another note, Tech Cemetery shows how to rig up a "headless" MATS flash drive that boots, automatically runs the MATS test, saves the log, and turns off the computer when it's done. Don't need a secondary display adapter.

    • @thiagoalvarenga71
      @thiagoalvarenga71 3 роки тому +2

      I tested my Zotac GTX 570 and the results of the memories are shown to me in a different way, in most of the videos that I watch they are always shown in order A1, A0, B1, B0 ... But in the result of my Zotac it is It shows me in order FBI0C 31, FBIOC 63, FBI0D 31, FBI0D 63 ... And I don't know how to identify them on the board.

    • @AdamAmbrus
      @AdamAmbrus 2 роки тому

      @@thiagoalvarenga71 the ones starting with 63 are the higher bits modules, 31 lower bits. Hence the banks with 63 would be "X1" and the other "X0"

  • @Silver-kh3yt
    @Silver-kh3yt 2 роки тому +3

    Does not work on 3070. Running mats -h gives "This card is not recognized, Error Code = 00000003"
    I heard people also had no success with their 3090. Hence, I think it won't work for any 30 series cards.

    • @Silver-kh3yt
      @Silver-kh3yt 2 роки тому

      If you are curious on what happened to my card, I tried thermal gluing copper pads to the vram to replace the original thermal putties. I quickly regret doing this while tried to teardown my card again - the thermal glue was too strong and I had to use razer blade to cut open the glue. While cutting I accidently destroyed two tiny capacitors near the bottom vram bank. Since then games textures occasionally turns mosaic and I knew it's because of the missing capacitors. I never knew the capacitor size so I ordered various sizes and tried soldering them back. That's why I need similar tools to test if I've fixed my card or not.

  • @DanielRakowiecki
    @DanielRakowiecki 4 роки тому +9

    Big question - can this work on laptop with soldered GPU? I have tried on Lenovo Legion with a GTX 960M but the test itself not going on - stays on "standard input" and nothing happens.
    I do tons of laptops on my channel.

    • @mvtechlabs4943
      @mvtechlabs4943  4 роки тому +2

      Hi Daniel, nice channel! I really don't know, haven't tried it on laptops yet. All bad video memory on laptops I get heats like crazy, so I use thermal camera for diagnostics usually. But I think the way mobile chip-sets work with discrete video GPU/memory is quite different from desktop. So I would guess it will no work without a LOT of re-configuring. Try this python script method ua-cam.com/video/UVi_UAc6L6M/v-deo.html&t . It should work as long as video memory is initialized (by bios or linux driver).

    • @Radek__
      @Radek__ 4 роки тому +2

      @Daniel Rakowiecki: a co Ty tu robisz? :) Za robotę się weź ;)

    • @Swc_Leader
      @Swc_Leader 3 роки тому

      @@mvtechlabs4943 please come back and make more UA-cam videos. We need you😭

    • @anarasgarli
      @anarasgarli 3 роки тому

      Yes, its working. I tested it with 960m and gtx 1660 ti max q.

  • @hi-friaudioman
    @hi-friaudioman 5 місяців тому

    I managed to get mods installed on a flash drive using e2b but i was having trouble with the commands in the console. Totally forgot about the PDF documentation. Lol.
    Thanks for the guide!

  • @junaidy3510
    @junaidy3510 4 роки тому +11

    your video is very useful, I can't find mods.zip, where can I download it ? Thanks

    • @JacJackyPJ920
      @JacJackyPJ920 3 роки тому +19

      try drive.google.com/file/d/1T9E3Zje4eei7HQ1NiS12XnD9FzS5Hcvw/view

    • @ronaldanomorales
      @ronaldanomorales 3 роки тому

      @@JacJackyPJ920 i cant find autoexec file?

    • @tripkogenius1395
      @tripkogenius1395 3 роки тому +1

      @@ronaldanomorales Autoexec is hidden system file -- in folder options untick hide protected OS files

    • @haramusa3649
      @haramusa3649 3 роки тому +1

      I CANNOT SEE AUTOEXE FILE HELP ME

    • @numan6693
      @numan6693 2 роки тому

      @@haramusa3649 cant find it neither. And one order is also missing. did u solve this problem ?

  • @tony359
    @tony359 Рік тому

    Thank you, I've just started with Mods/Mats and this is helpful. And the PS/2 intro is just one of the best I've seen! :)

    • @shakedm10
      @shakedm10 Рік тому

      Where did you find the tool? I've having a hard time finding it on the internet, it seems to be deleted everywhere I go

    • @tony359
      @tony359 Рік тому

      @@shakedm10 can't remember to be honest, I think it was on another video's description. Check out tech cemetery.

    • @thesystem8146
      @thesystem8146 2 місяці тому

      @@shakedm10 Did you ever manage to find it? I am having no luck

  • @Lhow0810
    @Lhow0810 9 місяців тому +1

    did the software got taken down? because i am not able to see any download file other that the documentations and files. can someone help me please

  • @w0w0s0w
    @w0w0s0w 3 роки тому +1

    Great Video, but how do i identify the chips when i've got chips on the back.
    for example on my GTX Titan Black?

  • @TRHardware
    @TRHardware 3 роки тому +1

    Can I run MATS on a Nvidia card that does not show video output, but when Is secondary card in the system, it shows up?
    Card is detected in device manager, but with error 43. (RTX2080Ti).

    • @bannanas117
      @bannanas117 2 роки тому

      From what I've heard all cards with memory chips prior to 8YA77 & 8ZA77 are bad (for 20 series)
      Check gpuZ while in windows for your card. If you can't see bandwidth, bus and pixel fill rate, GPU is either kill or bios is corrupted
      If your mem passes mats and isn't dead you can try flashing the bios. If that doesn't work core prob dead
      This is based on things I've read of forums and repair chatrooms

  • @luisllaxa304
    @luisllaxa304 3 роки тому +1

    Hi. that SW is very awesome.¿ to detect VRAM fails in NVIDIA Video Cards. I have it, but I need the same MATS SW for AMD video card. Could You tell me where get it?

  • @jedrula77
    @jedrula77 Рік тому +1

    Hi, i find this 367.38.1 full image, just i burn on pendrive and after booting i see FAIL card not recognized. I buy rtx 3060 ti and want check memory. I have to 400.184 but only 2 files inside arch - maths and mods. Mods big file 24MB. And what i can doo with this version/ Thx for help.

    • @Neuralcarrot420
      @Neuralcarrot420 Рік тому

      Hey you need to paste mods and mats to your old mats and mods. It will ask to replace the old ones. Please ask for more help before if you’re not sure

  • @sangwooseo5202
    @sangwooseo5202 2 роки тому +2

    Thank you.
    Does it work with RTX30 series?

  • @kingghidorah8106
    @kingghidorah8106 11 місяців тому

    i have a problem with this, I burnt Mats only on a usb key and it starts writing 222222222222 forever and I can't even command anything. Of course it gives me failure for my rtx 2080ti founders edition which is starting to fail and my gigabyte 2060 super which is fine.

  • @alessandromarculino7051
    @alessandromarculino7051 Рік тому

    What is the name of your previous videos. Teaching how to read all cards.

  • @muria6631
    @muria6631 3 роки тому +4

    can you provide a download link or the way to download zip file?

  • @Porsche996TT
    @Porsche996TT 2 роки тому +1

    Hello
    I ran the test on a faulty GTX 970 that gives black screen
    First few boots I got a PASS
    I tried again the screen went black so I had to check the report.txt file I got errors in seven memory chips out of eight.
    Third time I got PASS again and the screen stayed on.
    What could that be? bad BIOS chip or clock chip?

    • @tonycstech
      @tonycstech 2 роки тому +1

      if you get errors after PASS, it means chips warmed up and produced error.
      Replace all chips. All at once since you have so many.
      Otherwise if you had one chip, you need to replace it with one that matches (more or less matches) the resistance with the rest.
      You measure memory chip pads power and ground pins for resistance.
      Chip with 10 or less ohms, garbage. The range is rather wild. Working chip can be anywhere from 10 ohms to 10k 🤨

    • @Porsche996TT
      @Porsche996TT 2 роки тому

      @@tonycstech Actually it wasn't the memory chips, there were 4 high side Mosfets.
      I replaced them, took 4 out from an old graphics card that I had that luckily had almost the same spec Mosfets and the card worked perfectly for about 7 hours, but they also shorted due to the Gate Driver if I'm not mistaken, and there something very strange about these Drivers, which is when I precisely spray a small amount of contact cleaner on the related Gate Driver the short is gone and the resistance of the Mosfet gradually gets back to normal, but when I tried to power the card again the short is back. I did that about 3 times and the short goes away every time with the contact cleaner on the Gate Driver. How can that happen? Does that mean the Gate Driver is faulty as well?

    • @bprud6443
      @bprud6443 Рік тому +1

      The gate of a mosfet acts like a capacitor and will remain charged if there's no path to discharge it. When the gate is charged the mosfet should show a short circuit between source and drain. If you discharge the gate it should show an open circuit. You can charge/discharge the gate using the leads of your meter. That makes mosfets quite confusing to measure. It looks like yours are behaving as expected.

  • @katerhamnorris3936
    @katerhamnorris3936 2 роки тому +1

    does not work for me I cant boot from usb drive no matter what i try
    #

  • @tonycstech
    @tonycstech 2 роки тому

    Will mats work with out a single memory chip ?
    Just to test if GPU is working and see if error report is generated, indicating that GPU is likely functional.

  • @Schwert120
    @Schwert120 5 місяців тому

    Hi short Question from where i can get MODS / MATS from Nvidia there is only different links but not the orginal

  • @thesystem8146
    @thesystem8146 2 місяці тому

    Where is everyone finding this software ?

  • @sebastianfigueroa7299
    @sebastianfigueroa7299 3 роки тому

    My GTX 1060 does not show video and my i3 10100f does not have integrated video, when I turn on the PC with USB after 30 seconds, the PC just shuts down, I check the USB and there is no "report.txt" file,

  • @flashcomp2371
    @flashcomp2371 2 роки тому

    can i use it even if the gpu not detected ? the fan spinning, the gpu no display after artifacting

  • @sirbhimasb
    @sirbhimasb 4 роки тому +1

    i got to boot into mods the first time but then when I want to boot it again it just show
    "_"
    at top left corner

    • @xXREDHEAD93Xx
      @xXREDHEAD93Xx 3 роки тому

      try checking your motherboards boot settings, likely its trying to boot legacy or uefi from your stick (whichever type it is NOT configured to). that's what caused it for me on an ASUS Board.

  • @testapi5223
    @testapi5223 Рік тому

    Great video! Anyone knows what to do when the test stucks at some point? I tried to skip the stucking test but then my computer just restarts.

  • @mosfet6402
    @mosfet6402 4 роки тому

    I have tried with two cards , one giving an image in the first slot pci-e 16x and the second doesn't give an image in the slot 2 Pci-e 16x , unfortunately it doesn't work, which Motherboard with integrated graphic have you used for this video??? Thanks

  • @Arek_R.
    @Arek_R. 4 місяці тому +1

    The AUTOEXEC file has got bunch of extra stuff, do I delete it or what?:
    @echo off
    set PATH=.;\;\LOCALE
    display con=(ega,,1)
    GOTO %CONFIG%
    :1
    mode con codepage prepare=((858) \locale\ega.cpx) > NUL
    mode con codepage select=858 > NUL
    keyb uk,,\locale\keyboard.sys
    :2

  • @danycuadra8004
    @danycuadra8004 3 роки тому +1

    Excelente video, this is what I was looking for, but the only problem I have is that my laptop is a uefi only system, is there a way to run this on it?

    • @inmetalll
      @inmetalll 2 роки тому

      I have the same problem. Looking for alternatives

  • @madalinmadalin3771
    @madalinmadalin3771 4 роки тому +1

    Im trying to test my 980ti , i do everything like in the video but i get the following message : unsupported dram page size - 8!

    • @Syzop
      @Syzop 3 роки тому +1

      this software version is running on for "GP-102,104,106" gpu's
      Your gpu model GM-200

  • @motherboardrepairsPH
    @motherboardrepairsPH 2 роки тому

    Hi, i canr seem to make mats mods to work, errors appears, is there a required motherboard specs to run that, and should my hardrive plugged in when using mats?

  • @neindochoohh7955
    @neindochoohh7955 2 місяці тому

    Helpful video, thanks. The only problem I got now, is that the Desktop is completely blank and I can't use my PC anymore (after changing the boot order back to normal). Please heeeeeeeelp!!!!!!!!!!!!😮😮😮😮😮

  • @Ferdinand-ir9gp
    @Ferdinand-ir9gp 3 дні тому

    Oh dear How Complicatet is this? I was Hoping it is easy like memtest… in dont want to figure this Codes out i want an ready use lise i have only to Type… and than i want to now what is wrong without dismount the Card…

  • @amerhasan6987
    @amerhasan6987 2 роки тому

    Thank you very helpful,i appreciate your help

  • @waelelkholi3406
    @waelelkholi3406 3 роки тому

    Hi, Thank you for a wonderful video. I have followed your video to diagnose my card. First, I would like to make sure that I have saved the mats file in the default note++ format. I do not know what extension shall I use for Linux. When I boot I get ( net ok/mods ok/bash ok/net.lo ok/hostname ok/syslogf ok/mount ok) then " system going down now" - sigterm to all processors-system power off! Do you know what could the problem be? could it be that the mats file format is not correct? Thank you in advance :)

  • @adamf3035
    @adamf3035 4 роки тому +1

    If there are vram on both side, how to locate the ram chip?

    • @Syzop
      @Syzop 3 роки тому

      two counts as one, example; your result is number 4 vram is broken, the fourth row front and rear vram will change

  • @tinkertom3683
    @tinkertom3683 2 роки тому

    Will it diagnose a GTX 1070 on a laptop? Would I need to uninstall the integrated graphics and run the software?

  • @WilliamVG
    @WilliamVG 2 роки тому

    I have a older Core 2 Q6600 LGA775 with on-board graphics in the motherboard, will i run into any issues when running mods/mats? I read, we need atleast a Sandybridge or newer? True?

  • @farfanSK8
    @farfanSK8 Рік тому

    How to cancel the test i put -e 6000 and takes for ever.

  • @Anas.Al-Sabbah
    @Anas.Al-Sabbah Рік тому +1

    MATS download link please

  • @user-lx9jm1wo3h
    @user-lx9jm1wo3h Рік тому

    Why didn't you show where to download it from?

  • @Estebanashh
    @Estebanashh Рік тому

    Hi. I can use it with old Nvidia cards ( like Geforce 256 or Geforce 2 GTS AGP) in DOS mode ? Great Video.

  • @tutukas33
    @tutukas33 2 роки тому

    Is there a way to change on which GPU to run mods and mats ? Without doing it through bios?. My bios does not have advanced settings, where you would normally do this.

  • @sebastianfigueroa7299
    @sebastianfigueroa7299 3 роки тому

    How i can do to boot mats from the bios? Like i said i got no video

  • @vin324pl
    @vin324pl 2 роки тому

    Hi, this versions of program its wprking with some of retro nvidia cards like Fx 5900, 6600gt, 7600gt etc?

  • @josealmeidacc7
    @josealmeidacc7 Рік тому

    And how to count when we have VRAM on both sides of the PCB?

    • @malarkey4441
      @malarkey4441 Рік тому

      A1 on top is A1 on bottom. So it's 50/50. I usually replace both.

  • @Intercomp_salam
    @Intercomp_salam 3 роки тому +1

    Hello sir. I wanna ask, why the folder 367.38.1 didn't show when i type "ls"?

    • @mareksz6525
      @mareksz6525 3 роки тому

      Did you unzip 367.38.1.tgz?

    • @Intercomp_salam
      @Intercomp_salam 3 роки тому

      @@mareksz6525 thank bro. At last i can running it with unzip the .tgz file.

  • @belgacemissameddine9699
    @belgacemissameddine9699 2 роки тому

    help with rtx 30xx memory test, this is not working

  • @mikegaming4924
    @mikegaming4924 3 роки тому

    I run ./mods gputest.js -mfg and it says "Error code (out of date golden file.) gp102 chip. what is that error?

  • @carismaticul
    @carismaticul 10 місяців тому

    where can i download mats iso file?

  • @aslanyurek6825
    @aslanyurek6825 2 роки тому +1

    Software please

  • @arturismagilov3285
    @arturismagilov3285 4 роки тому

    How in windows test videocard, videocards on SLI or
    NVLINK?

  • @VGATEC
    @VGATEC 4 роки тому +1

    In './mods gputest.jes -skip_rm_state_init -mfg' command, i get the following error message: "Erro Code 229 hardware was not initialized". "File gp107_f.xml not found". Would mats not be compatible with this gpu? Galax 1050.

    • @mvtechlabs4943
      @mvtechlabs4943  4 роки тому +1

      I had no problems running everything from GTX950 to 1080 with 367.38.1 version. But only as a primary cards. There could also be motherboard issue (MATS refuses to work on some H81 - H87 chipsets).

    • @VGATEC
      @VGATEC 4 роки тому +1

      Yes. My motherboard:PCWARE IPMH81G1. I was only able to run the test successfully after disabling the integrated Intel Processor Graphics. Thank you!

    • @eternal89
      @eternal89 4 роки тому

      @@mvtechlabs4943 Kepler and Fermi chips work with this mats?

    • @mvtechlabs4943
      @mvtechlabs4943  4 роки тому

      It's hard to tell as there is no official support list as you can imagine. These architectures has a lot of mobile gpu's that I haven't encountered, but most desktop ones should work.

  • @ulasdanacioglu
    @ulasdanacioglu 3 роки тому +1

    all seem defective vram , could there be another problem? the driver is artifact when I enable it
    note: i changed the gpu

    • @Syzop
      @Syzop 3 роки тому

      hepsi bozuk görünmez aslında bunun hatası hiç bozuk göstermemesi, elle komut yazmadan önce program bir defa açılışta tarama yapıyor ramlere.
      mods klasörünün altında reports.txt diye bir dosyaya atıyor oradaki sonuçları kontrol edebilirsin

    • @gkhngvr
      @gkhngvr 3 роки тому

      @@Syzop Hocam merhaba, mats çalışıp sonucu ekranda gösteriyor. Flashı cekip başka bilgisayarda kontrol ettiğimde report.txt içi boş gözüyor. Test sonrasında report.txt yi save almak için yazılacak bir kod varmı yada ne yapmak lazım.Bazen kaydediyor bazen kaydetmiyor sonuçları reporr.txt nin içine?

    • @Syzop
      @Syzop 3 роки тому

      @@gkhngvr hocam merhaba, o programda 2 tane report.txt dosyası var biri doğru biri yanlış çünkü ikinci kontrolde ramlerde veri olduğu için yazmıyor bir nevi askıda bıraktığı için sağlam gösteriyor.
      Aslında açılışta kendisi bir test yapıyor onu mods klasörünün içine atıyor report.txt olarak doğrusu bu, biz elle ./mats uyguladığımızda 368. klasörünün içine bir tane daha report.txt gösteriyor o elle yaptığımız sorgu ve içi boş oluyor dolu olsa da ramleri sağlam gösteriyor.
      en doğru yol ise başlatmadan önce mods klasörünün içindeki reports.txt dosyasını silip boot edip testi kendisinin bitirmesini bekledikten sonra normal bilgisayarda açıp kontrol etmek

    • @Syzop
      @Syzop 3 роки тому +1

      bir de ek olarak, onboard ekran kartı var ise test hata verecektir, onboard grafik işlemciden görüntü veren anakart veya işlemci kullanmayın yalnızca test edeceğiniz kart olsun.
      kartta hiç görüntü olmasa bile anakart 35 saniye sonra karttan görüntü vermez ama sistemi açar flash bellekte ışık varsa okuduğunu oradan anlarsınız, normal boot edin görüntü gelmese de 5 dakika bekleyip flash belleği normal bilgisayara takın report dosyasına bakın farklı bir sorun yoksa oluşturmuştur

  • @VGATEC
    @VGATEC 4 роки тому +1

    Very good video! Thanks!

  • @DavidzinhoFC
    @DavidzinhoFC 4 роки тому +2

    I really appreciate your videos. I would like to ask for your advice please, I ended with a defective Gigabyte RTX 2070 (Micron memory) and I'm trying to decide what to do with it, I found this video which is very interesting because I didn't know that there is a way to test BGA card ram chips, so, my question is, Do you know if it is possible to run a card removing the bad chips from it? for instance, if the card originally has 8GB of ram but only 2 chips are failing, if I remove them from the card will boot up and work properly with 6GB or the video card bios will try to use those memory chips/addresses even when they were removed physically? there is any way to remap these defective chips on the bios?
    As you can see I don't want to throw this card as it was really expensive, I would like to fix it. I appreciate your help and advice, please.

    • @gerrepair7862
      @gerrepair7862 4 роки тому

      Sorry, you have no idea how a card working.
      Replace zur Bad chips.
      For checking you need mods 400,xx version

    • @UsiddaTech
      @UsiddaTech 3 роки тому

      @@gerrepair7862 are you saying this version is not working with Rtx 2070 ?

    • @gerrepair7862
      @gerrepair7862 3 роки тому +2

      @@UsiddaTech you need to replace the mats and mods files from the 400 version. Search on vlabs

  • @flashcomp2371
    @flashcomp2371 2 роки тому

    where can i find the download li nk ?

  • @svetlozarpetrov7513
    @svetlozarpetrov7513 3 роки тому

    Can we overclock the memory in the test, I have a memory that gives an error when overclocking. I want to know who it is :) Thanks

  • @youtubehandle-o8d
    @youtubehandle-o8d 2 роки тому

    Where the hell do I get 455 MATS MODS can anyone tell me? Can't seem to find a download link, everything look suspicious

  • @holdipoldi6048
    @holdipoldi6048 2 роки тому

    Great ! You are the best 👍

  • @dizaztohr
    @dizaztohr 3 роки тому

    so it only can be done running on linux?

  • @bre3eze983
    @bre3eze983 2 роки тому

    I found the faulty VRam bank , it was b1 so the third one , where can i find a replacement ? should i just find a graphics card w 1 gb a module and GDDR5 and thats it ? or does it involve clock speed and other thing ?

    • @tonycstech
      @tonycstech 2 роки тому

      you read the chip model of the chip and order from china

  • @bre3eze983
    @bre3eze983 2 роки тому

    Dude you are amazing , Thank you

  • @smnckl8602
    @smnckl8602 2 роки тому

    I don't get an output from my gtx 1050ti so I installed it as second graphics card and used a gtx 550ti to test. After the command ". /mods testgpu.js -skip_rm_state_init - mfg" my monitor loses signal and goes black. I just typed in the next command anyways without seeing and hit the enter key. After some times I switched off the pc and after rebooting I got a report for my 5mb test. It didn't show errors. So I wanted to test for a bit longer and tried with 50mb. I let it run for like 20 min before rebooting. But this time my report file was empty. Did I do something wrong or does it just take really long to test with 50mb? And why does my monitor go black?

  • @UsiddaTech
    @UsiddaTech 3 роки тому

    When I run ” ./mats -e 5 “ I get “this card is not recognized “ error code =00000003 even tho am displaying using hdmi cable output to my monitor help me please ?

    • @Syzop
      @Syzop 3 роки тому +1

      if you have onboard graphics processor, example; intel hd graphics .... this software is first looking onboard and not recognize another card.
      please try "./mods gputest.js -skip_rm_state_init -mfg" and use ./mats -e 5 :less command.
      if you dont see fault on results, try only booting test result

  • @wstd7417
    @wstd7417 Рік тому

    does this program work on AGP card? or are there any programs to test with?

  • @yabed
    @yabed 2 роки тому

    hi could this work for a laptopo with Rtx 2070 max-q?

  • @oleczkaify
    @oleczkaify 4 роки тому

    Is it working with agp nvidia cards too?

  • @ukaszdabrowski732
    @ukaszdabrowski732 4 роки тому

    You helped me a lot with using that tool but I'm not sure how to understand the results in my case.. I mean - I have GTX1080Ti that is recognised by PC when I put it as second card but gives 43 windows error. If I try to start PC only with this card, it just restarts after 10s, no display at all. I measured 1,39V on memory and 0,8V on GPU, whole card draws 2,8A so it's fine. Mats test says that there are read and write errors on every memory bank except for one that is free on PCB - is it possible? Or GPU is dead?

  • @SignedAdam
    @SignedAdam Рік тому

    doesn't work with 4090 even tried 455.219 which comes pre packed in an iso, which you use a different way than the one shown in the video

  • @WilliamCCSGO
    @WilliamCCSGO 3 роки тому +3

    Do you have the newest file for testing Turing/RTX and Ampere version?

    • @Magovit
      @Magovit 3 роки тому

      hi, did you get it?

    • @WilliamCCSGO
      @WilliamCCSGO 3 роки тому

      @@Magovit Not yet unfortunately

  • @ItsAkile
    @ItsAkile Рік тому

    yeah..couldn't find a download path

  • @diegomr6969
    @diegomr6969 3 роки тому

    for ati amd?

  • @julioaguilar1548
    @julioaguilar1548 4 роки тому

    hi have you the version MATS versión 4.173.1. i aprecciate much if you can share i need test G210 VGA card GT218 chip

  • @eduardorozz
    @eduardorozz 3 роки тому

    i tested my gpu and the report shows me that is read errors, anyone know how to fix it? excuse me for my poor english

  • @xLucyfer666x
    @xLucyfer666x Рік тому

    Hi, I have problems with my GPU. I think it is a memorry error. I have RTX 2080 TI and I need to run a 400.184 version of MODS(MATS). I have some files from web but they are very different then 367.38.1 version. I can't run it in the LINUX :/ Can you make tutorial how to do it with 400.184?

    • @Brydzo
      @Brydzo Рік тому

      Hey, I have a similar issue. Have you found a solution?

  • @nobruvicmarko1124
    @nobruvicmarko1124 Рік тому

    Please can someone give me link for download files i cant find them

  • @101john1001
    @101john1001 Рік тому

    Excellant tutorial Thank you I have problem i hope some one can advise on after MODS has finished loading and returns to the command promt my keyboard is not working even though I selected it at the start of the boot so I can not type anything: all fix it was keyboard compatabilty swappped the keyboard and worked perfectly

  • @batofgotham4383
    @batofgotham4383 3 роки тому

    Ich habe alles so gemacht wie du sagtest. Es bootet vom pendrive aber MODS/MATS startet nicht sondern bleibt mit der Zeile /mnt/nv/mods stehen und wartet. (Kurzor blinkt)

    • @userEXEFire
      @userEXEFire 2 роки тому

      Ab da musst du mit den Befehlen "ls" und "cd" arbeiten, um dich in den Ordnern zu navigieren.

  • @inmetalll
    @inmetalll 2 роки тому

    Hi everyone! Great video but unfortunately i can't boot in MS-DOS because there is no legacy bios support on my laptop. Is there any alternative or other way to boot so i can test VRam chips ! I'm open fo advicees. Thanks

  • @Bassquake76
    @Bassquake76 3 роки тому

    Trying to test a GTX 1050, get a Error 000000000229 Hardware was not initialized. Any ideas what this means? Edit: Nevermind. Seems it didnt like the HP motherboard. Tried it on an MSI board and tests worked. Weird thing is, I know the card doesnt work properly yet passes the tests! 😕

    • @kas-lw7xz
      @kas-lw7xz 3 роки тому

      Then it's your motherboard i guess

  • @ronaldanomorales
    @ronaldanomorales 3 роки тому

    its work on amd gpu?

  • @voodoo3hardware574
    @voodoo3hardware574 4 роки тому +3

    Hi, thank you very much for this video, it is a very important software in which its use is not very simple, thank you!
    I wanted to ask a question. good parts of the cards I have here, gtx 1000, when it reads the memory with error. Is it
    usually in writing, when there is a problem with reading, and in all modules, is the reading problem with the GPU,
    modules or PCB?

  • @des8249
    @des8249 3 роки тому

    I tried running my gpu on ./mats -n 1 -e 5:less but it gave me unsupported dram page size. Do u have any solution for it

    • @electronicloop-de
      @electronicloop-de 3 роки тому

      try "./ mats -n 1 -e 5 |less" (PIPE '|' is important, its not a ':', though it almost looks like it in the video) (make sure you are running of igpu and only have the NVIDIA card in a PCIe slot when using -n 1 parameter

    • @des8249
      @des8249 3 роки тому

      @@electronicloop-de Just like to say thanks so much!!! This was so helpful. I managed to run it but my 1080ti had rd err across all its memory chips..

    • @danielleinweber1476
      @danielleinweber1476 3 роки тому

      @@des8249 if you are getting errors on ALL chips, try a lower memory amount, i noticed many cards get errors on all chips if the amount tested is too high. alternatevily there is three possibilities: 1. all your chips are dead 2. a voltage needed for them or the controller is missing 3. your memory controller in the GPU is defective. ( a combination of the 3 is also always possible, if a highside MOFET in the voltage Regulation ciruit fried)

  • @FixiTStream
    @FixiTStream 3 роки тому

    Excellent

  • @mafiases1216
    @mafiases1216 2 роки тому

    amd work?

  • @TheErendyl
    @TheErendyl 3 роки тому

    Hi I have a Errorr message with : PCI Express Bus Error ( 000000000143) Can You Help What is that ? :)

    • @azarian44
      @azarian44 2 роки тому

      I have same problem

  • @alexanderwalkenhorst1469
    @alexanderwalkenhorst1469 9 місяців тому

    Does anyone have a link to the download? I just can't find it

  • @dreimi7040
    @dreimi7040 Рік тому

    hey does somebody know if it works with a rtx4080? And which Version do i need ?

  • @Marc_Wolfe
    @Marc_Wolfe 2 роки тому

    it has to be your primary video card.... literally later in the same video 13:43

  • @userEXEFire
    @userEXEFire 2 роки тому

    When I try to run mods I get "error 467 no such file or directory"
    No clue what I'm doing wrong
    Mats works fine

    • @csPinKie
      @csPinKie 8 місяців тому

      How did u fix it?

    • @userEXEFire
      @userEXEFire 8 місяців тому

      @@csPinKie no clue tbh

    • @csPinKie
      @csPinKie 8 місяців тому

      @@userEXEFire i know how. You need to extract the archive document via command line in the linus sys after that you can run memtest

    • @userEXEFire
      @userEXEFire 8 місяців тому

      @@csPinKieCool, thanks!

  • @bennyhandoko6310
    @bennyhandoko6310 3 роки тому

    have mats (amd ) ?

  • @jamisri9392
    @jamisri9392 10 місяців тому

    link download please

  • @menzyman8970
    @menzyman8970 4 роки тому

    Hi what thermal camera do you suggest? I bought ht 102 but its terrible

    • @mvtechlabs4943
      @mvtechlabs4943  4 роки тому

      Seek Thermal Compact does the job for me. If you have more $$$ to spend - then Thermal Expert TE-M1 is a really good step up.

  • @UrosAndric
    @UrosAndric 3 роки тому

    Hello. After the test it reports that memory module C1 has errors, but the error counts are pretty low. It has only 33 errors. I crank up the ammount of memory to diagnose from 20megs to 100 megs and number of errors stayed the same. Have any experience with that low memory error counts? Am i making some msitake with MATS or the chip (and/or surrounding) is bad?

    • @jervanmarin1766
      @jervanmarin1766 3 роки тому

      that's an error with the memory contact most of the time, just reflow that vram bank and it should work

    • @Adrian_Finn
      @Adrian_Finn 2 роки тому +1

      Mine has 33 errors as well, I'm sure it's a false positive or something because I had no reason to test my card as it's rock solid with no artefacts, I was just testing the program. I found on forum this "There is a hypothesis that the issuance of 33 errors on work cards may be due to the fact that during the test the memory that contains the screen buffer (or something else related to the output to the screen), which, in addition to the test, is somehow used by the system itself simultaneously with the test. That is, it can be a "false alarm"."

    • @iliasads3817
      @iliasads3817 2 роки тому

      similar situation here, did you find what was wrong?

    • @Adrian_Finn
      @Adrian_Finn 2 роки тому

      @@iliasads3817 Yes, I think many agree that the test is just trying to test the area of memory already in use by the screen buffer (The area used to show you the test on screen). This doesn't seem happen on every card but many agree its a false alarm.

    • @iliasads3817
      @iliasads3817 2 роки тому

      @@Adrian_Finn Unfortunately in my case I have artifacting and freeze when the drivers initialize. There's definitely a problem, I was hoping it was a memory bank but the low error count probably means there is something else wrong.
      Also, is there some forum to find resources about this? I am searching but nothing comes up