I just had my quartz coutertops installed, this information is SO useful, thank you! The one thing that I never thought of was testing the draws before the counter guys left, my draws don't open! I had a moment and cried, this has been a long process and I was so excited to see them in place I never thought to test that. I just thought I would put this information out to the world for others to monitor before their counter people leave 🙂.
It can be a draining experience at times, but I hope yours is, ultimately, a rewarding one. Forgive me if I am incorrectly picturing your issue. If they are a reputable company who cares about such reputation, they will be willing to address the issue -- if it can be, and there is almost always an option that might be accepable, albeit, a modification of your original vision. If there is a special overhang/enlarged edge that blocks your cabinet doors, and you are willing to change the look you wanted, they could modify/replace the countertop with a thinner edge. Some companies will do this at no extra cost, or definitely at reduced cost -- because something like that should've been noticed by experienced installers. This is most true if you, yourself, noticed it soon and told them shortly after the install. Or, they should be willing to work with you by temprarilly removing the counterop until a raised wood base is attached and seemlessly blended into your existing cabinet framing. Then the countertop can be reinstalled, now just slightly higher to avoid blocking the doors. If all that is too costly [or if backsplashes have now been installed and countertop removal would cause cistly damage to it, there are companies that will make new drawer and door fronts [or a handy-person might even just slightly down-recenter the exiting fronts] to eliminate the blocking.
Case in point, my new granite countertops were installed with choseled edges. I didn't have time to fully look over things -- certain things take a while to notice after the excitement and newness of the install happens. Plus. I had to get back to my job. It wasn't until two says later that I had a good hour to look things over in the daylight. I noticed unacceptable areas of the chiseled edges -- significant [i.e., most] of the edging. Although I signed their "good-n-happy" appproval sheet before the installers left -- the company was honest enough to come back and look it over. Even though they refused to acknowledge thatvtheir claimed "chiseled edges" weren't [the edges looked like smooth waves], they ultimately removed the countertops and gave me a full refund. Granted, they knew my personality [and couldn't claim I misunderstood reality -- before going with them,I showed them pictures of the type of chisel I wanted and they agreed]. They knew that I would take further steps until rectified. They did the removal and refunded me [albeit, a month later] -- but not without the salesperson saying, as she left my house the kast time, "Good luck finding someone who will give you what you want." I did, the very next day. This company had far more experience with all types of edges, and gave me a beatiful, TRUE, chiseled edge. Bweare of the many "boutique " countertop sellers. It is time consuming, but find shops that have examples, and also are willing [as my second-and-better choice] to actually do a small text cut to show ypu ahead of time and ask if is acceptable before doing the whole thing. Oh, and this second company checked the clearance of the drawers and doors before bonding the slab to the framing.
I test quartz here in this video - ua-cam.com/video/D3PEsEXmtAE/v-deo.html Content correction: Hey friends, while I always do my best to provide good information, sometimes I will make mistakes or get things wrong. A couple things were pointed out to me that I wanted to correct. 1. The companies that use Bretonstone plants have the liberty of adding the aggregates they wish, to make the patterns and styles they decide. This can effect quality to a degree. 2. I mentioned mm instead of cm for thickness. 3. Quartz is heat resistant to nearly 200 deg. C. It is subject to thermo shock as well. Thank you to all who watch my videos and comment!
Hi! I find your video very useful, so thanks! We are just starting to plan our new home. Thanks also for including food safety in your presentation! I am a food safety practitioner for food manufacturing and think this topic cannot be stressed enough. 😉 A small FYI: NSF (now called NSF International) is the National Science Foundation (not “Sanitary”). Headquartered in Ann Arbor, Michigan. Go Blue!
@@janine4360 Hey thanks so much and for the correction. I appreciate it. I'd love to learn more about food safety and how it relates to the surfaces we put in our homes. If you ever would consider chatting about it please reach out at mark@mtkd.ca
I don't do this myself, but I have a relative who makes candies, chocolates, and confectionaries. Keeping the countertop warm or cold (depending on what she's making) is really helpful to the process. She complains often that she can't have this in her home and she was spoiled by the business where she learned. She has a section of marble for the cooling properties, but she'd die if she could have a heated section. I can't wait to tell her about this trick!
This is one of the best presentations I've ever seen. Clear and concise and you have a very natural delivery. I could listen to you all day! Great work. And thanks for the great info.
I've helped my son in-law install several quartz counter tops and when he does a seam it's like a science experiment with two suction cup based clamps that not only pull the two slabs together but adjust the height of each slab and when finished the seam is invisible. Unfortunately not all installers are willing to invest in the equipment needed to get to this quality.
About to install quartz countertops. We were informed the 10’x2’ slabs were supposedly 190lbs by the homeowner. Yeah when me and my buddy unloaded them from the delivery truck, I’ll tell you right now they were indeed not 190 lbs. they were much much more lmao. I think they were more like 400. Only us 2 were there when the delivery guy came, and we unloaded them and that was a back breaker forsure. Unloading 4 separate 10 foot slabs with 2 guys…. Goodbye back and arms
This was very valuable information! Thank you for delving into all the nooks crannies and giving us the benefit of your research. A more informed shopper is a happier shopper in the end. 👍👍
This is great content. Two things... If you get a permanent marker on your counter top, just get a dry-wipe marker and go over the permanent marker and it'll just wipe off. Secondly, Can you place a quartz countertop over an induction cooktop and use pans on the quartz without it cracking from the pan heat?
Thanks, Mark!!! Although a few months old, I am just getting to this one! We have gone to the slab-getting place :) before but we are now ready to make final decisions and therefore this is perfect timing. Your videos are so informative and honest. THANK YOU! Wish us luck.
Fabulous! Everything I wanted to know about quartz countertops but was afraid to ask. Can you explain the pros and cons of getting a quartz countertop that includes a backsplash?
Thanks to the info I got from your video there are now quartz countertops in my kitchen. And they are GREAT!! And yes I made sure it was a Bretonstone quartz company. Thanks again.
Mark, everything I read online says quartz has a recommended max temp of 300F/150C due to possible damage to the resin. Quite a difference between your 1300F/700C! I did learn a ton about my new quartz countertops, so thank you.
Thanks for the list of companies. Having looked at a couple places casually they all seem to have the same thing and nothing that makes me want to spend thousands of dollars. I'll use your list to research further and hopefully find something I LOVE.
@@MTKDofficial I hope it all goes well too, especially after watching your video on kitchen counter "don'ts". I mean, I've never seen a worse install job than that woman's whose counters didn't even touch the cabinets...jeez.
I never knew about the wire mesh heating element for quartz countertops. We have quarts currently and in the winter it is almost too cold to work on my computer at the island. In our new home, I will have this wire mesh heat feature added ~ thank you so much!!!!
Your videos are very informative and enjoyable to watch and listen to. Thank you for the knowledge and insight, very very helpful and appreciated. Cheers from Wisconsin.
While I like the way you broke down the "things you need to know " categories, there is some misinformation in this video. 1) using the Breton method of manufacturing doesn't guarantee equivalent quality. That method combined with good raw materials is what creates quality engineered stone. 2) material thicknesses are not that thin (you referenced mm rather than cm). 3) heat resistance is not up to 700 degrees Celsius. It isn't even 700 degrees Fahrenheit. It accepts moderate heat and is susceptible to thermal shock. 4) it cannot be used outdoors...which needs to be part of the conversation...even in covered areas. Always check with the actual manufacturer of the product with regard to how to care for quartz surfaces. And finally, a brand name does not mean they actually manufacture their own product. Some "brands" are produced for a brand name but that company doesn't actually control the content/process (just color or pattern definition).
Hey. Thanks for the comment. And the insight on a few of the points I messed up. I appreciate it. While I try to research and find good info, it’s never perfect.
@@MTKDofficial you are welcome! I was lost when I first got immersed in the stone industry. There's a lot to know and technology is changing our choices rapidly. Google doesn't always have the most current information which is a challenge in all areas of design.
This was really comprehensive--thank you! You know what else will stain your quartz countertop? FOOD COLORING. I happen to know from kid experience. Ugh.
We are looking at Quartz countertops...we are younger so we wanted it because of being able to put hot pans on surface without worrying about deforming other materials..and mostly because my wife don’t want the “cheap” look of laminate... my question is...will black quartz show fingerprints and smudges more likely..kinda like stainless steel. Debating between white or black and if either one is hard to keep clean
Quartz is a great choice! Darker colours tend to show more smudges, but particularly if they are solid colours. Like a solid black. However, the way the light reflects at certain times of day shows smudges on any colour. Quartz is easy to keep clean, definitely go with the colour that you really love! And send me a pic when it's done!
Exactly the discussion I needed to hear. Thanks! If my budget worked for it, I’d probably choose quartz. The countertop in the home I just bought it laminate that is edged with wood. Dated. And has evidence of some (not as much as one would have expected with this design) but some water damage. But considering all things, I’m going with laminate. For the cost, durability, and the fact that overall I prefer the sound of setting dishes on laminate over quartz or other stone surfaces, I think laminate is what I actually want. Will it need replacing in 7-10 years. Probably. But by then I might actually be interested in a kitchen renovation anyway. I’ll use the $$ saved on adding upper cabinets above the existing cabinets that are currently topped off with crown molding about 18” lower than the ceiling.
Hey Brian. Thanks for watching. The best way is to call the manufacturer, if you can get that information. Otherwise, I normally do a search to see if a product is manufactured using the bretonstone patent. Usually you can find some info at least. If nothing turns up, I’d be suspicious of the product. It doesn’t mean it’s not good, but it’s always nice to see some technical specs. These should be readily available in one nice location, but unfortunately not.
If you get sharpie stains, use toothpaste. Let it sit for about 10 mins. Depending on how deep the mark, you may need to repeat the process once or twice, but it works and no need for the magic eraser
Best Mark Tobin, I appreciate your channel, but to say that all manufacturers who use the patented Breton technique all deliver the same quality seems a bit too optimistic to me. There is also such a thing as a difference in quality in terms of color pigment and binder. Not everyone uses the same quality. The purity of the quartz grains could also make a difference, although this is minimal. Kind regards, Frans Kwakkenbos
If you spill wine or some tomato sauce and forget to clean it, Quartz WILL stain. Put a hot pan on it, and it WILL leave a yellowish stain. I used to have granite, and deeply regret putting Quartz on my kitchen. It looks nice, but it is actually rather delicate, specially in white color I installed.
Our home was a flipper restoration but we needed to buy it. The counetrtops throughout are quartz & stain instantly and etch and shasow instantly, with no remedy. Its like the top film is porous, and absorbs. Anything oily..instant. Anything slightly acidic even like hydration drink powder if condensation liquifys...instant. any highly pigmented spice. Instant. The dull shadowing is the worst, & really makes the countertops look awful. Any recommendations to reshine????
PS. They are white Calcutta type ( ubiquitous in remodels). They even gave started to feel "gritty". And..nothing ive seen in videos tell that actual PHOTOGRAPHS of the designed surfaces are layered to create the pattern..you are seeing the pattern through a clear layer of quartz. Look great ( Ive loved Cambria for years but used Genuine Quartzite slabs in our old kitchen) but still....
I have had no issues with my quartz. My guest spilled drops of red wine and it wasn’t cleaned for a while but came right off. I love it it’s very low maintenance.
Great information, especially about the pricing differences! You've convinced me to subscribe! 😀 You have a nice voice and demeanor about you... you remind me of Eddie Vedder from the band Pearl Jam, lol! 😆
@@MTKDofficial The best thing? Oh wow, YAY!!! 😃 Glad to hear that! I was hoping you wouldn't be offended (or worse, not know who I was talking about! 🙃 haha!) I LOVE Eddie Vedder too!!! Best singer ever!!!
@@SweetStuffOnMonarchLane ok well maybe not the best thing. Haha. But I’m a huge Pearl Jam fan. I remember seeing them on SNL for the first time in 1992. I was blown away. Lol.
@@MTKDofficial Haha! Yeah, I'm a huge fan, too! You have a good memory (or maybe they just made a strong impression on you!) We saw them back in 2006 in Grand Rapids, MI. Omgosh, SO good! We had nosebleed seats, of course, and I remember thinking how lucky those people were on the floor in the first row sharing a bottle of wine with Eddie during Crazy Mary! ua-cam.com/video/RlTEnz7Hl9I/v-deo.html I WAS THERE!!! LOL! 😃
Dude, this is the most informative video! Thanks for educating me. I was hired to install a quartz countertop by some friends and they apparently don't have a clue about anything. What they had delivered to their home is not a countertop, it is a five-foot by ten-foot slab. We live on an island which makes shipping prices astronomical so sending it back is not really an option. So now I am tasked with fabricating the countertops. I have never worked with quartz before so I am trying to educate myself as best I can. Your video was very helpful. I wish I could find a video on the fabrication of quartz countertops that is as informative as this video is. But I highly doubt that I will. Thanks again.
Sean! Thanks for the comment. I really appreciate it. My goal is to help the viewer as much as possible. Sounds like you are in a predicament though especially if they sent a slab. I wish I could help you with the fabrication info, but it is not a skill I'm proficient in. I've only ever seen it done with a CNC machine and highly specialized equipment. If I come across something of value I'll send it your way.
Make sure you wear a p100 respirator, the quartz dust is definitely not something you want to breathe in, EVER. It will screw up your lungs permanently
If you need to cut seams at any areas aling the install, having one big piece may actually be a benefit. Color and shade matching among different "slabs" of same-brand quartz is a definite must if one buys multiple smaller sizes.
Just had a quartz countertop installed. it was a solid color with no vein or movement. I was quite surprised at the differenced between the slab color sample I had picked and the slab color that was installed. How can customers be certain they are getting the color sample picked? The slab sample had no marking on it to indicate what "dye lot" it was as the only explanation we got was that it may have been a different dye lot, a term we had never heard before. Very disappointed. We picked the color we wanted based on its being in line with other permanent surfaces in the room: the granite island, the wall tile, the floor and the brick fireplace. I would strongly suggest to all who are looking at quartz counter tops - even solid color - to be certain that the color you picked is the color you get - I would hope the showroom where you make the selection can confirm the dye lot number of the sample you pick with the actual slab used. Good luck!!! The company that made the quartz rep said it was the same color. A second company selling the same product, when looking at the two colors said, NO, they were different colors and NOT just two different dye lots in the same color.
One problem is they are using the term "Dye Lot" out of context. It has to do with the variations in tiles and has nothing to do with quartz countertop manufacturing. I completely agree with the second company, you were looking at two different colors. I've sold quartz for 20 years and this has never happened....unless I ordered the wrong color. Nothing to do with dye lot.
@@MTKDofficialThank you. Sadly neither the company we purchased the countertop from nor the company that created the countertop were willing to accept responsibility for the fact that the piece installed was not the same color as the piece we selected - we had the sample selected side by side with the piece they installed but the man representing the company that supplied the quartz said they were the same color - the man who represented the company that sold and installed the quartz felt it was definitely different than the color ordered but that we, the customers, should have driven to the where the quartz was to be fabricated (an hour away, it turns out) and made sure the color was the same - I now refer to that company as Buyer Beware Granite rather than BBG. What seemed evident, after both men viewed the countertop and 5" x 10" sample in our kitchen is that their relationship with each other is more important to them than a relationship with the customers making the purchase. Again, let the buyer beware. On a happier note, it was through you we learned about the low divide double sink. That is what we purchased and we are very happy with that decision. Thank you for introducing us to that sink system.
Ikea offers three price levels of quartz countertops. Based on your information, they come with the same quality but different materials for the price differences. From the look, it is hard to tell what makes the price differences.
If the slabs all come from the same manufacture, then the only difference in price would be slab thickness or slab design. Normally the price points are for different slab designs.
Wonderful video. Very informative. I’m thinking about getting IKEA courts countertop. Do they supply quarts counters from manufacturers who use the Breton method?
Hey Jennifer. I've added a list to the description with all the company's that use Bretonstone slabs. You would have to ask the supplier or fabricator where they buy their slabs from. If it's not on that list, it's not Bretonstone.
I own a countertop company and I get this question about putting hot pans on expensive countertops . Geez it’s insane. I ask do you always put hot pans without pot holders now ? I tell protect your investment. Whether it’s quartz, granite or quartzite. But I say it’s yours when I leave do whatever you want with it . It’s funny that putting a hot pan on it one of the main questions.
@@rosieandrade8482 yes high heat can melt it and discolor it But a cookie sheet is usually ok . I think it’s good for a couple of hundred degrees. But why chance it put a pot holder down. Takes a second.
@5:41, you mention slab thickness is between two and seven mil. I assume that mil is millimeters, which isn't much more than 1/4 inch. I have seen quartz much thicker than that, so please elaborate on your thickness comment.
Boy did we learn a lesion. We just got our new counter top installed. I got a new deep oil fryer for xmas. I was cooking with it for the first time and cracked the counter top.
@@MTKDofficial to be honest I dont know. we bought off a large counter top store here in Vegas. I have made calls this morning. I will be calling the fryer manufacture. I want to see what the temp is on the bottom of the device. will keep you in the loop. I saw on UA-cam a couple clips of Air Fryers cracking the counter tops
@@MTKDofficial Trivets should be used under any electric countertop cooking appliance. It is important to remember that ES is a hybrid between natural stone and solid surface so it has the benefits and limitations of both. When that is understood, it can give years of trouble free service.
Thank you so much. Moving soon to my brand new home and had no idea how to care for my Quartz countertops. I have a question on the topic of stains. I’m originally from Puerto Rico and in our cooking we sometimes used Annato oil. I’m very careful when using, but sometimes accidents happen. Wondering how will that stain be taken care of. This is the kind of oil that the stain will linger for days. Only harsh chemicals will take the stain out. What is your advice.
Hi Sandy. I would be careful with harsh chemicals. Barkeepers friend is what I would recommend for quartz. Always test it out somewhere inconspicuous first. But that stuff is really great.
@Mark Tobin Kitchen Design its says right on the package for barkeepers friend "for non-stone countertops". I'd be nervous recommending it to anyone knowing this...
Thank you for so many wonderful videos! Some question I have is do you think it is ok to use stock cabinets under quartz countertops? Such as would stock cabinets hold up long term ? And if you were to want to upgrade lower cabinets later on, would the quartz countertop have to be busted off and ruined in order to replace the cabinets?
Depending on the quality of the stock cabinets, I'd say sure. Most times you would be fine. If you upgraded later, the top could come off. Easier if there are no seams however. Though the new cabinets would have to match exactly in size, so you don't run into trouble. I would never recommend doing the countertop first if you are also planning on changing the cabinets. Do the cabinets first and later you can upgrade easier. But it can be done.
Thanks for the video! Have you used Vadara brand quartz? It has a look more like quartzite, but I didn't see the company on the list you have in the comments.
Great informative video! I’m in the middle of a kitchen remodeling and choose a quartz countertop. I purchased a Calacatta Ultra quartz stone and Googled who manufactured it, which is MSI Surfaces. This company is not on your list. Is this a reputable company?
Hi Mark! I have a question. I want to put a black quartz with sparkles on my kitchen BUT the sales person told me that black quartz does not tolerate heat well. He advised to go with black granite instead. Should I buy the granite? I really want it to be black with sparkles ✨ Ty!
Hmm. If you are going to be putting scolding hot pots on your countertop, then maybe not. But just use a trivet if you have a habit of doing that. Quartz is heat resistant to a point. However, the more material in it (glass, metal, etc.) the more resin. It's the resin that can be effected by heat. The black granite is a nice choice too. Hard to say. Use a trivet either way actually.
Hey thanks for watching. You can get a bullnose profile, it just isn't that popular right now as far as edge treatments go. That's probably why you don't see it. Normally you'll see a small 1/8" radius.
Hi. Your videos are informative. I am planning to get a quartz countertop for kitchen. Other options are granite, nano glass and full body vitrified kitchen counter slabs. I have seen a brand Petrostone based in Pune, India. Brochure says it's made with Breaton Stone Technology from Italy. It mentions high grade quartz. It's economical compared to Caesarstone and Silestone and I can get Calacatta designs which I certainly can't with the premium brands. My question to you. 1. Is Petrostone a safe bet for quartz they give a 10 year warranty. Silestone is my 2 nd choice but can opt for a base grey shade and not the white ones 2. Should I consider full body vitrified tile...all designs available and very budget friendly 3. Is granite the safest bet. It's the most economical of the lot though I can go upto the grey shade of silestone 4. 3 cm slabs from Petrostone are placed to order while 2 cm slabs the only options from silestone. Is 2 cm thick slab sufficient or do we need 3 cm slabs Once more thanks and waiting for your reply
Hi Michelle. Thanks for watching and leaving a comment. Here's my opinion on your questions. Hope they help. 1. I have no experience with Petrostone. Although they use Breton tech, going up against Silestone or Caesarstone is tough. They have been in the industry for a long time and are two very trusted names. So personally I would probably go with your second choice. 2. I love vitrified tile, however I think large scale slabs are a better way to go. Have you considered porcelain slab? 3. I think granite is the safest bet overall in terms of durability and heat resistance. The only problem is you don't get a warranty on the material, only the finish (if it comes pre-sealed). At lease with quartz you do get a good warranty. 4. 3cm for sure. It's been the industry standard in North America for a long time.
@@MTKDofficial thanks. . that was useful I haven't seen these porcelain slabs here We have 15 mm thick full body vitrified tile 240 x 80 cm which is an option for kitchen counter tops. But I feel they are prone to get chipped.. Looking forward to more videos Brands of caeserstone and Silestone are only available at 20 mm here. Main reason I considered Petrostone since I can order 30 mm But guys here say 20 mm should be fine
Can you please advise me on the following. I have a suede finish quartz kitchen countertop that shows all water marks, finger prints etc. that are driving me nuts. I have located a company that says they can hone, polish and seal the countertop. Is this something that can really be done at home or am I being fed a lie.
Well, quartz can be sanded and polished. That's how they get the finish at the fabrication plant. Doing it in the home is a pretty big job. Do they say how much? I would probably want to see some examples of their work. But it is doable.
Thanks Mark, granite how to remove oil from our hands from my granite. I have tried so far the following a clay mixture powder that I mix with water. I’ve also tried baking soda with water, and baking soda with hydrogen peroxide 3%, I have also tried the mixture of the clay powder the hydrogen peroxide 3% and baking soda all mixed it into a peanut butter consistency then cover with Saran wrap and we will see how that turns out in two days. Thanks for all your information Mark appreciate you.
Thanks for the comment John. Do you know if the granite is sealed. Not sure if it will completely prevent oily stains. Sounds like you're trying all the right remedies. Hope it works for you!
We have seams in our newly installed quartz. I noticed they raise up a little. Can the area be sanded down? Will it effect or dull the color in that area? Is the stamp that deep? It’s 2cm.
Great video. About the seams, our L shaped countertop does have a seam that is visible to the eye and you can feel it with your nails. We had a couple of nicks that the warranty guy easily repaired with resin beautifully. But when I asked about the seam, he checked it with his razor blade and said it was actually better than most. If I could upload a photo here, I would. Was this person honest or just lazy? Every time I clean the counter I feel that seam catching, and I do wonder how much dust etc can accumulate over time? Thanks
I am looking at purchasing a quartz countertop. The manufacturer has multiple thicknesses available (max 6 cm). To make 6 cm you have the options of either having two 3 cm slabs laying on top of each other and baked together (but if it's heavily patterned, you won't get the seamless look when looking at the slab from the side) OR having the edges mitered (where you can get a more seamless side view appearance but it costs more money since the manufacturer will need to try and match the edges of the slabs). Please consider adding this detail to your vid. Thanks for the video!
I’ve never heard of 6cm slabs for countertops. I’ve hear of 6mm big differences. To get a 6cm look the edges are mitered or stacked. There is no benefit to glueing 2. 3cm stones together just to get the thick look for the entire slab . I own a countertop company. And the edges should line up because heavily patterned quartz slabs should be almost identical. It’s very costly to have pattern changes.
@@JS-zb1vv Cambria offers some countertops in 6 centimeters. Some people may like the look. If one uses a chiseled or rock face edge profile, the change in the pattern between the 2 slabs isn't as noticeable. I saw it in a showroom once.
@@JS-zb1vv I don't work in the field. The Cambria website and the showroom rep told me it was 6 centimeters thick - just sharing what I was told by Cambria with others. Since you're in the profession, feel free to verify if you'd like.
Home depot associate told me that ppl thede days selling quartz counter tops that are not sealed and will get stain vrry quickly from oil , food , coffee , dish soap liquid .. is that true ?
Well... maybe they were meaning quartzite, which definitely has to be sealed? (Just giving them the benefit of the doubt) Manufactured stones like quartz do not need to be sealed. They are manufactured to 0.05% porosity. There are however, brands out there that do not manufacture quartz to the same standards as the Breton patent. That doesn't mean that they are not good, but harder to verify if they stand up quality wise. Hope that helps
Would you be able to tell me if Venezia stone is a reputable company? I never heard of it but the sales guy said it's good. Thanks for such a helpful video
Hi. Venezia is an importer. They bring in quartz and other stones from around the world. This is fairly common and not something to worry about. However, the issue is, where they are getting their slabs from. If you can find that out, then it would be easy to tell if it is a good quality stone. The sales gut should know this info.
Hey! I want to buy honed quartz and im super worried about sealing every other months and cleaning it. I have researching online but getting mixed information. What do you recommend? Would hones quartz be trickier than polished quartz in cleaning?
Quartz does not need to be sealed, whether it's polished or honed. A honed finish just requires a little more care in cleaning. Just don't be abrasive with it. Honed finishes show more finger prints and smudges and in turn people end up cleaning it more. hope that helps.
I want quartz. Hubby wants laminate. We older & just moved here 2yes years ago. Not planning on selling. However, when we're gone I'd like our daughter to get most of sale of this home. Hard choice
Isopropyl Alcohol saved my laminate countertops and thermafoil cabinets from Sharpie! Would alcohol damage the quartz? If not, it works like a miracle.
Hi Haydée! On laminate it is great. Acetone as well. It definitely can be used on quartz, though it is recommended to water it down. Personally, I would reach out to the supplier before I used alcohol to clean, just because it is a solvent. Really good point to bring up.
Hairspray can remove sharpie ink, too. I have a 20 year old Silestone countertop . It has developed 2 hairline cracks that seem to run along parallel to the edge of the cabinets under them. Hmmm
Just had quartz counters installed. Metal from cookware causes metal scratches when washing around the sink, rubber feet from counter appliances leave a black stains and substances like coffe leaves a stain; all of which has to be scrubbed off! I hate these counters. Had another house with granite and never had a problem and never saw the seems like I di with this new quartz (cream color).
No idea if I got a bad batch or something, but our brand new (weeks old) counters are staining if you look at them wrong (I kid but just barely). Was making some old fashions with maple syrup the other night, didn't notice some syrup got on the counter top until I went back to clean up like 30 minutes later. The syrup left a stain that we keep scrubbing and got most of it to go away but you can still see it. Then a day later I had a dry pan, not hot, not used, just dry pan we had put down on the counter. Came back a few hours later and it left a rusty looking ring under it that we still can't get out. The pan itself is not rusted, it was brand new I had just gotten as a gift and put on the counter so I could wash it before storing it away. Now I'm afraid to put anything on these countertops. Feels like literally anything will stain them. No idea what is going wrong with these things since before we bought them I looked far and wide for the most durable low maintenance options and quartz came out on top.
I'm assuming it has a warranty, so I would definitely get the rep to come out and have a look. It should hold up better than that. The big issue with quartz would be the resin and binding agents. They can possibly react chemically with certain things. However, if your counter can't handle a brand new pot there is something a miss.
Hi. By "passive" do you mean less maintenance? If so, it does not require any sealing. Just regular cleaning as you would anything else. So, I suppose the answer is yes.
What about crockpots/slow cookers? I have 3 of them which get used a lot, several times a week and oftentimes 2 even all 3 at the same time. Currently have laminate countertops and whenever I use my crockpots I don’t normally put anything underneath them. I’m in the middle of deciding to update my 25 year old kitchen and thinking about upgrading to quartz counters. Also, what about air fryers and Instant Pots/electric pressure cookers? Currently, my instant pot sits on top of my stove so that when the pressure is released I turn the hood fan on.....changed from the having it on the open peninsula due to staining my ceiling, oops! Yes, that peninsula will be going too, lol! I just can’t seem to figure out what type of island to put in? Right now it’s got a raised bar all around it with 4 bar stools 🙄!
Hi Lori! Thanks for the comment and question. If your slow cookers aren't delaminating your laminate countertop, I would not worry at all about them damaging quartz. The stone will dissipate the heat evenly and more efficiently than laminate. Of course it's always advised to use a trivet "just in case" . For the island, I recommend a one level extended depth island. With or without seating (whatever you prefer). Here's a video on island seating talking about the different options. ua-cam.com/video/9EdAtCo2LjA/v-deo.html Thanks again
@@MTKDofficial Thank you Mark for actually replying, I wasn’t expecting it as some other UA-camrs usually don’t. I literally just discovered your channel yesterday and started binge watching your videos, so yes , I did see the one about islands. By “extended depth” do you mean “overhang”. And would that be all around the island or just on one side? I’m looking for a functional island with storage without a sink nor cooking surface. We had water damage under the sink (not the first time) that resulted in mould that had to be professionally removed and dealt with and so all of this happened in just the last couple of weeks. Now that more retailers are allowed to open, (we live in Canada and our province has been in lockdown the longest for about the third time now!) we already have four kitchen and bath companies (need to update our bathroom too) booked to come out and give us ideas and quotes. So I’m trying to get as much information as humanly possible so that I know what they’re talking about and of all the videos I’ve watched yours are the easiest to understand. If I were to send you some pictures, could you offer some advice? Thank you again for all your helpful videos which are truly appreciated especially since this waterfall/mould problem just threw me for a loop!
@@LoriP123 thanks! I try my best to respond to comments. It’s one of the best parts for me. Definitely send some pictures. I’d love to take a look. marknamytobin@gmail.com Thanks so much for watching the videos. I’m in Nova Scotia so I know all about lockdown lol.
@@LoriP123 so the island could have overhang on the back side. If you wanted seating. Or have some extra storage if you didn’t. Normally an island depth is 27”. With overhang or extended the depth it could be 36” to 42”. It makes for an excellent work surface either way.
ok, get your unit straight. 700 C degrees is over 1200 F. That is the temp aluminum melts. even 700 F sounds iffy. I am seeing hot pans will mess up a quartz top. Even vinegar will mess it up. The weak spot is not the quartz, it's the resin binder.
heat resistant to 700C then you say use a trivet. that's wishy-washy. so... does a hot pan risk leaving a burn or heat ring? if i place a 500C pot onto the quartz for 2 minutes, will it visually damage the quartz?
Certainly didn’t mean to be wishy washy. The resin in quartz can and does burn. Always check with the fabricator on what they recommend. Under normal use it’s fine, just stuff out of the oven might be an issue.
they put Caesarstone brand in our new office and it kind of sucks. shows stains quite often. Like a drop of coffee leaves a stain that doesn’t wipe clean easily. Why is this?
The resin (binding agent) is susceptible to holding a stain briefly especially if they are acidic. I have a video where I test various stains. Some wipe easier than others. Dekton would have been a better choice.
Hi there! I watched the video hoping to find out how to get water stains out of a quartz countertop as well as to find out if you can remove scratches. I have watermarks all around the faucet and i got scratches from setting a ceramic planter on the counter. The video was awesome, but didnt hit on those. Do you have any suggestions? I saw 0000 grit steel wool for the water stains? Thank you!
Be careful not to make it worse by removing the sheen from sanding. I'd even try a Mr. Clean Magic Eraser. I've seen videos on repairing surfaces, but am certainly no professional at this.
Thanks for such an informative video.. Do you happen to know the name of the quartz in the video at 10:39 (where you are talking about warranties)? Thanks!
I just had my quartz coutertops installed, this information is SO useful, thank you! The one thing that I never thought of was testing the draws before the counter guys left, my draws don't open! I had a moment and cried, this has been a long process and I was so excited to see them in place I never thought to test that. I just thought I would put this information out to the world for others to monitor before their counter people leave 🙂.
It can be a draining experience at times, but I hope yours is, ultimately, a rewarding one.
Forgive me if I am incorrectly picturing your issue.
If they are a reputable company who cares about such reputation, they will be willing to address the issue -- if it can be, and there is almost always an option that might be accepable, albeit, a modification of your original vision.
If there is a special overhang/enlarged edge that blocks your cabinet doors, and you are willing to change the look you wanted, they could modify/replace the countertop with a thinner edge. Some companies will do this at no extra cost, or definitely at reduced cost -- because something like that should've been noticed by experienced installers. This is most true if you, yourself, noticed it soon and told them shortly after the install.
Or, they should be willing to work with you by temprarilly removing the counterop until a raised wood base is attached and seemlessly blended into your existing cabinet framing. Then the countertop can be reinstalled, now just slightly higher to avoid blocking the doors.
If all that is too costly [or if backsplashes have now been installed and countertop removal would cause cistly damage to it, there are companies that will make new drawer and door fronts [or a handy-person might even just slightly down-recenter the exiting fronts] to eliminate the blocking.
Case in point, my new granite countertops were installed with choseled edges. I didn't have time to fully look over things -- certain things take a while to notice after the excitement and newness of the install happens. Plus. I had to get back to my job. It wasn't until two says later that I had a good hour to look things over in the daylight. I noticed unacceptable areas of the chiseled edges -- significant [i.e., most] of the edging.
Although I signed their "good-n-happy" appproval sheet before the installers left -- the company was honest enough to come back and look it over. Even though they refused to acknowledge thatvtheir claimed "chiseled edges" weren't [the edges looked like smooth waves], they ultimately removed the countertops and gave me a full refund.
Granted, they knew my personality [and couldn't claim I misunderstood reality -- before going with them,I showed them pictures of the type of chisel I wanted and they agreed]. They knew that I would take further steps until rectified. They did the removal and refunded me [albeit, a month later] -- but not without the salesperson saying, as she left my house the kast time, "Good luck finding someone who will give you what you want."
I did, the very next day. This company had far more experience with all types of edges, and gave me a beatiful, TRUE, chiseled edge.
Bweare of the many "boutique " countertop sellers. It is time consuming, but find shops that have examples, and also are willing [as my second-and-better choice] to actually do a small text cut to show ypu ahead of time and ask if is acceptable before doing the whole thing.
Oh, and this second company checked the clearance of the drawers and doors before bonding the slab to the framing.
I test quartz here in this video - ua-cam.com/video/D3PEsEXmtAE/v-deo.html
Content correction: Hey friends, while I always do my best to provide good information, sometimes I will make mistakes or get things wrong. A couple things were pointed out to me that I wanted to correct.
1. The companies that use Bretonstone plants have the liberty of adding the aggregates they wish, to make the patterns and styles they decide. This can effect quality to a degree.
2. I mentioned mm instead of cm for thickness.
3. Quartz is heat resistant to nearly 200 deg. C. It is subject to thermo shock as well.
Thank you to all who watch my videos and comment!
Hi! I find your video very useful, so thanks! We are just starting to plan our new home. Thanks also for including food safety in your presentation! I am a food safety practitioner for food manufacturing and think this topic cannot be stressed enough. 😉
A small FYI: NSF (now called NSF International) is the National Science Foundation (not “Sanitary”). Headquartered in Ann Arbor, Michigan. Go Blue!
@@janine4360 Hey thanks so much and for the correction. I appreciate it. I'd love to learn more about food safety and how it relates to the surfaces we put in our homes. If you ever would consider chatting about it please reach out at mark@mtkd.ca
I don't do this myself, but I have a relative who makes candies, chocolates, and confectionaries. Keeping the countertop warm or cold (depending on what she's making) is really helpful to the process. She complains often that she can't have this in her home and she was spoiled by the business where she learned. She has a section of marble for the cooling properties, but she'd die if she could have a heated section. I can't wait to tell her about this trick!
This is one of the best presentations I've ever seen. Clear and concise and you have a very natural delivery. I could listen to you all day! Great work. And thanks for the great info.
Thanks! Glad you found it helpful.. Appreciate the kind words.
I was about to look up maintenance as you were speaking and of course it was the next subject - very concise and covered many details! Thanks
Well, that was SUPER informative! Thank you so much for taking the time and educating us.
Hey Johnny! Thanks for the comment.
I've helped my son in-law install several quartz counter tops and when he does a seam it's like a science experiment with two suction cup based clamps that not only pull the two slabs together but adjust the height of each slab and when finished the seam is invisible. Unfortunately not all installers are willing to invest in the equipment needed to get to this quality.
The best channel about kitchens (I've watched lots) Mark is awesome!
About to install quartz countertops. We were informed the 10’x2’ slabs were supposedly 190lbs by the homeowner. Yeah when me and my buddy unloaded them from the delivery truck, I’ll tell you right now they were indeed not 190 lbs. they were much much more lmao. I think they were more like 400. Only us 2 were there when the delivery guy came, and we unloaded them and that was a back breaker forsure. Unloading 4 separate 10 foot slabs with 2 guys…. Goodbye back and arms
This was very valuable information! Thank you for delving into all the nooks crannies and giving us the benefit of your research. A more informed shopper is a happier shopper in the end. 👍👍
Sweet, So glad it was helpful.
Thanks! I feel a lot better about choosing quartz for our new build.
Yeah, you really can't go wrong with quartz. Most places are selling the good stuff. It's too nice!
This is great content.
Two things...
If you get a permanent marker on your counter top, just get a dry-wipe marker and go over the permanent marker and it'll just wipe off.
Secondly,
Can you place a quartz countertop over an induction cooktop and use pans on the quartz without it cracking from the pan heat?
Thanks, Mark!!! Although a few months old, I am just getting to this one! We have gone to the slab-getting place :) before but we are now ready to make final decisions and therefore this is perfect timing. Your videos are so informative and honest. THANK YOU! Wish us luck.
Hey Laurie! Thanks so much for the comment. I hope it goes well!
Fabulous! Everything I wanted to know about quartz countertops but was afraid to ask. Can you explain the pros and cons of getting a quartz countertop that includes a backsplash?
Thanks to the info I got from your video there are now quartz countertops in my kitchen. And they are GREAT!! And yes I made sure it was a Bretonstone quartz company. Thanks again.
Awesome! Glad my content was helpful!
What a well done job in letting folks know the ins and outs of quartz counter tops. Also, thanks for addressing my question.
Hey George! Glad you commented when you did. I hadn't even considered it. Thanks again for watching.
Wow Mark, Thank you for the fantastic job you did explaining everything to us!! Much appreciated! Great video!
Hi Claudia! Thank you very much for the comment. I'm glad the video was helpful!
Mark, everything I read online says quartz has a recommended max temp of 300F/150C due to possible damage to the resin. Quite a difference between your 1300F/700C! I did learn a ton about my new quartz countertops, so thank you.
Hey thanks for watching. I pinned a comment with that correction a while back. My bad!
Thanks for the list of companies. Having looked at a couple places casually they all seem to have the same thing and nothing that makes me want to spend thousands of dollars. I'll use your list to research further and hopefully find something I LOVE.
"They" say Cambria has some rally nice designs. But I agree, they can all look a little similar after a while.
You are an excellent teacher. Found you from Living on a Dime channel. You're awesome 👍
Hey! Thanks so much for saying "Hi"! Appreciate the comment.
Thanks. On the market now for quartz countertop, and you answered questions I hadn't thought of, but am glad to have the answers.
Awesome! I think it's a great choice.
Your video sold me on quartz - demo next Tuesday and hopefully install by Friday.
Sweet! Hope it all goes well! Thanks for letting me know!
@@MTKDofficial I hope it all goes well too, especially after watching your video on kitchen counter "don'ts". I mean, I've never seen a worse install job than that woman's whose counters didn't even touch the cabinets...jeez.
About to build my first home. I'm about to marathon watch your channel! Great info thanks! Commenting for the algorithm!!!!!!!!!!!!
Haha. Thanks so much. Got to keep that algorithm happy!
Great and thorough review. Thank ypou.
I never knew about the wire mesh heating element for quartz countertops. We have quarts currently and in the winter it is almost too cold to work on my computer at the island. In our new home, I will have this wire mesh heat feature added ~ thank you so much!!!!
Your videos are very informative and enjoyable to watch and listen to. Thank you for the knowledge and insight, very very helpful and appreciated. Cheers from Wisconsin.
Appreciate the kind comment! Thank you.
hello. thank you for this video. best informatjon out there on Quartz
While I like the way you broke down the "things you need to know " categories, there is some misinformation in this video. 1) using the Breton method of manufacturing doesn't guarantee equivalent quality. That method combined with good raw materials is what creates quality engineered stone. 2) material thicknesses are not that thin (you referenced mm rather than cm). 3) heat resistance is not up to 700 degrees Celsius. It isn't even 700 degrees Fahrenheit. It accepts moderate heat and is susceptible to thermal shock. 4) it cannot be used outdoors...which needs to be part of the conversation...even in covered areas. Always check with the actual manufacturer of the product with regard to how to care for quartz surfaces. And finally, a brand name does not mean they actually manufacture their own product. Some "brands" are produced for a brand name but that company doesn't actually control the content/process (just color or pattern definition).
Hey. Thanks for the comment. And the insight on a few of the points I messed up. I appreciate it. While I try to research and find good info, it’s never perfect.
What temp/degree would you say is correct?
@@MTKDofficial you are welcome! I was lost when I first got immersed in the stone industry. There's a lot to know and technology is changing our choices rapidly. Google doesn't always have the most current information which is a challenge in all areas of design.
@@russman1958 check with the manufacturer. Usually less than 350 degrees F.
@@whatsgoodinthehood thank you !
This was really comprehensive--thank you! You know what else will stain your quartz countertop? FOOD COLORING. I happen to know from kid experience. Ugh.
outstanding video. clear and concise, thank you.
Very educational! Thank you.
We are looking at Quartz countertops...we are younger so we wanted it because of being able to put hot pans on surface without worrying about deforming other materials..and mostly because my wife don’t want the “cheap” look of laminate... my question is...will black quartz show fingerprints and smudges more likely..kinda like stainless steel. Debating between white or black and if either one is hard to keep clean
Quartz is a great choice! Darker colours tend to show more smudges, but particularly if they are solid colours. Like a solid black. However, the way the light reflects at certain times of day shows smudges on any colour.
Quartz is easy to keep clean, definitely go with the colour that you really love!
And send me a pic when it's done!
Great video! Super interesting and helpful!!!
Thanks Rob!
Thank you! We’re getting quartz countertops next week. I feel like we made a good choice 👍
How has it held up?
Exactly the discussion I needed to hear. Thanks! If my budget worked for it, I’d probably choose quartz. The countertop in the home I just bought it laminate that is edged with wood. Dated. And has evidence of some (not as much as one would have expected with this design) but some water damage. But considering all things, I’m going with laminate. For the cost, durability, and the fact that overall I prefer the sound of setting dishes on laminate over quartz or other stone surfaces, I think laminate is what I actually want. Will it need replacing in 7-10 years. Probably. But by then I might actually be interested in a kitchen renovation anyway. I’ll use the $$ saved on adding upper cabinets above the existing cabinets that are currently topped off with crown molding about 18” lower than the ceiling.
Thanks for the comment. I'm glad the video was helpful. There is definitely nothing wrong with going laminate.!!
Wow, great video. I learned more from it. I wish I'd found your channel sooner. Thanks!
Hey Bernice. Thanks for letting me know and thanks for watching.
Your videos are awesome! Thank you!
Thank you for the great, eye-opening video! Any suggestions on where to go to research the quality and safety of a particular quartz product?
Hey Brian. Thanks for watching.
The best way is to call the manufacturer, if you can get that information. Otherwise, I normally do a search to see if a product is manufactured using the bretonstone patent. Usually you can find some info at least. If nothing turns up, I’d be suspicious of the product. It doesn’t mean it’s not good, but it’s always nice to see some technical specs. These should be readily available in one nice location, but unfortunately not.
LOVE THESE VIDEOS! Very helpful!! You should make a Granite Countertop everything you need to know video as well!
Loved this video! Sooooo helpful! Tks
If you get sharpie stains, use toothpaste. Let it sit for about 10 mins. Depending on how deep the mark, you may need to repeat the process once or twice, but it works and no need for the magic eraser
Cool! Great tip!
very informative. thank you so much!
I believe Cambria is the only quartz countertop made in the USA. I also read that they have their own formula and not the Breton one. Could be wrong.
Best Mark Tobin, I appreciate your channel, but to say that all manufacturers who use the patented Breton technique all deliver the same quality seems a bit too optimistic to me. There is also such a thing as a difference in quality in terms of color pigment and binder. Not everyone uses the same quality. The purity of the quartz grains could also make a difference, although this is minimal. Kind regards, Frans Kwakkenbos
If you spill wine or some tomato sauce and forget to clean it, Quartz WILL stain. Put a hot pan on it, and it WILL leave a yellowish stain. I used to have granite, and deeply regret putting Quartz on my kitchen. It looks nice, but it is actually rather delicate, specially in white color I installed.
For sure. The resin will discolour with either heat or some substances. Though with my testing, only turmeric left a light residual stain.
Our home was a flipper restoration but we needed to buy it. The counetrtops throughout are quartz & stain instantly and etch and shasow instantly, with no remedy. Its like the top film is porous, and absorbs. Anything oily..instant. Anything slightly acidic even like hydration drink powder if condensation liquifys...instant. any highly pigmented spice. Instant. The dull shadowing is the worst, & really makes the countertops look awful.
Any recommendations to reshine????
PS. They are white Calcutta type ( ubiquitous in remodels). They even gave started to feel "gritty". And..nothing ive seen in videos tell that actual PHOTOGRAPHS of the designed surfaces are layered to create the pattern..you are seeing the pattern through a clear layer of quartz. Look great ( Ive loved Cambria for years but used Genuine Quartzite slabs in our old kitchen) but still....
I have had no issues with my quartz. My guest spilled drops of red wine and it wasn’t cleaned for a while but came right off. I love it it’s very low maintenance.
When you are building a home the builder has 7 levels of quartz and Granite.
Can you explain the levels?
Great information, especially about the pricing differences! You've convinced me to subscribe! 😀 You have a nice voice and demeanor about you... you remind me of Eddie Vedder from the band Pearl Jam, lol! 😆
AHHHHHHH!!!! That is the best thing anyone has every said to me! I love Eddie Vedder! Thanks.
@@MTKDofficial The best thing? Oh wow, YAY!!! 😃 Glad to hear that! I was hoping you wouldn't be offended (or worse, not know who I was talking about! 🙃 haha!) I LOVE Eddie Vedder too!!! Best singer ever!!!
@@SweetStuffOnMonarchLane ok well maybe not the best thing. Haha. But I’m a huge Pearl Jam fan. I remember seeing them on SNL for the first time in 1992. I was blown away. Lol.
@@MTKDofficial Haha! Yeah, I'm a huge fan, too! You have a good memory (or maybe they just made a strong impression on you!) We saw them back in 2006 in Grand Rapids, MI. Omgosh, SO good! We had nosebleed seats, of course, and I remember thinking how lucky those people were on the floor in the first row sharing a bottle of wine with Eddie during Crazy Mary!
ua-cam.com/video/RlTEnz7Hl9I/v-deo.html
I WAS THERE!!! LOL! 😃
This was great!! Thank you
Thanks Marcela! Glad is was helpful.
wow what a great video, thank you so much!
Dude, this is the most informative video! Thanks for educating me. I was hired to install a quartz countertop by some friends and they apparently don't have a clue about anything. What they had delivered to their home is not a countertop, it is a five-foot by ten-foot slab. We live on an island which makes shipping prices astronomical so sending it back is not really an option. So now I am tasked with fabricating the countertops. I have never worked with quartz before so I am trying to educate myself as best I can. Your video was very helpful. I wish I could find a video on the fabrication of quartz countertops that is as informative as this video is. But I highly doubt that I will. Thanks again.
Sean! Thanks for the comment. I really appreciate it. My goal is to help the viewer as much as possible. Sounds like you are in a predicament though especially if they sent a slab. I wish I could help you with the fabrication info, but it is not a skill I'm proficient in. I've only ever seen it done with a CNC machine and highly specialized equipment. If I come across something of value I'll send it your way.
@@MTKDofficial Thanks, Mark. You truly are a spreader of knowledge.
Make sure you wear a p100 respirator, the quartz dust is definitely not something you want to breathe in, EVER. It will screw up your lungs permanently
If you need to cut seams at any areas aling the install, having one big piece may actually be a benefit. Color and shade matching among different "slabs" of same-brand quartz is a definite must if one buys multiple smaller sizes.
Thanks for the video. I picked out my quartz before video and just found out its not Breton Stone!!😫. So back to looking..ugh.
Just had a quartz countertop installed. it was a solid color with no vein or movement. I was quite surprised at the differenced between the slab color sample I had picked and the slab color that was installed. How can customers be certain they are getting the color sample picked? The slab sample had no marking on it to indicate what "dye lot" it was as the only explanation we got was that it may have been a different dye lot, a term we had never heard before. Very disappointed. We picked the color we wanted based on its being in line with other permanent surfaces in the room: the granite island, the wall tile, the floor and the brick fireplace. I would strongly suggest to all who are looking at quartz counter tops - even solid color - to be certain that the color you picked is the color you get - I would hope the showroom where you make the selection can confirm the dye lot number of the sample you pick with the actual slab used. Good luck!!! The company that made the quartz rep said it was the same color. A second company selling the same product, when looking at the two colors said, NO, they were different colors and NOT just two different dye lots in the same color.
One problem is they are using the term "Dye Lot" out of context. It has to do with the variations in tiles and has nothing to do with quartz countertop manufacturing. I completely agree with the second company, you were looking at two different colors. I've sold quartz for 20 years and this has never happened....unless I ordered the wrong color. Nothing to do with dye lot.
@@MTKDofficialThank you. Sadly neither the company we purchased the countertop from nor the company that created the countertop were willing to accept responsibility for the fact that the piece installed was not the same color as the piece we selected - we had the sample selected side by side with the piece they installed but the man representing the company that supplied the quartz said they were the same color - the man who represented the company that sold and installed the quartz felt it was definitely different than the color ordered but that we, the customers, should have driven to the where the quartz was to be fabricated (an hour away, it turns out) and made sure the color was the same - I now refer to that company as Buyer Beware Granite rather than BBG. What seemed evident, after both men viewed the countertop and 5" x 10" sample in our kitchen is that their relationship with each other is more important to them than a relationship with the customers making the purchase. Again, let the buyer beware. On a happier note, it was through you we learned about the low divide double sink. That is what we purchased and we are very happy with that decision. Thank you for introducing us to that sink system.
If I wanted to add an additional water faucet perhaps for water filtration. How easy is it a drill a hole through a Quartz countertop?
Ikea offers three price levels of quartz countertops. Based on your information, they come with the same quality but different materials for the price differences. From the look, it is hard to tell what makes the price differences.
If the slabs all come from the same manufacture, then the only difference in price would be slab thickness or slab design. Normally the price points are for different slab designs.
Thx for the useful information.💐
You said slabs come in 2mm up to 7mm, i think you may have meant 20mm to 70mm? Thats of course wrong, but great video.
Wonderful video. Very informative. I’m thinking about getting IKEA courts countertop. Do they supply quarts counters from manufacturers who use the Breton method?
Thanks for watching, and yes they do!
Excelente information!!! Much appreciated!,
Hey Joe! Thanks for watching.
How to remove hard water stain from quartz countertops around the kitchen sink faucet?
Ty! Great info!!
Is there a way to know if a company does NOT use the Breton Stone technology? Thx again!
Hey Jennifer. I've added a list to the description with all the company's that use Bretonstone slabs. You would have to ask the supplier or fabricator where they buy their slabs from. If it's not on that list, it's not Bretonstone.
I own a countertop company and I get this question about putting hot pans on expensive countertops . Geez it’s insane. I ask do you always put hot pans without pot holders now ?
I tell protect your investment. Whether it’s quartz, granite or quartzite. But I say it’s yours when I leave do whatever you want with it . It’s funny that putting a hot pan on it one of the main questions.
Very sound advice. It is funny that it's a main concern. I never thought of it like that.
Hi,
Will The Heat Damage It?
I Read A Few Comments, There’s Has Turn A Yellow Shade.
Any One …
Ty, Rosie
@@rosieandrade8482 yes high heat can melt it and discolor it
But a cookie sheet is usually ok . I think it’s good for a couple of hundred degrees. But why chance it put a pot holder down. Takes a second.
Thank you for the information.
Very useful content. Thanks. I am wondering whether the heat of a cooktop (downward ventilation) can damage the surrounding quartz countertop.
I don't see that being an issue. Though I don't really know ow much heat it would draw.
@5:41, you mention slab thickness is between two and seven mil. I assume that mil is millimeters, which isn't much more than 1/4 inch. I have seen quartz much thicker than that, so please elaborate on your thickness comment.
I pinned a correction in the comments. I meant to say CM
Boy did we learn a lesion. We just got our new counter top installed. I got a new deep oil fryer for xmas. I was cooking with it for the first time and cracked the counter top.
Wow! That is not good. Thanks for telling me. Info like this helps when I make content in the future. What brand name, if you don't mind sharing?
@@MTKDofficial to be honest I dont know. we bought off a large counter top store here in Vegas. I have made calls this morning. I will be calling the fryer manufacture. I want to see what the temp is on the bottom of the device. will keep you in the loop. I saw on UA-cam a couple clips of Air Fryers cracking the counter tops
@@DannyVegas I hope they can do something for you. That is disheartening. It must get pretty hot though to crack it?!
@@MTKDofficial Trivets should be used under any electric countertop cooking appliance. It is important to remember that ES is a hybrid between natural stone and solid surface so it has the benefits and limitations of both. When that is understood, it can give years of trouble free service.
Thank you so much. Moving soon to my brand new home and had no idea how to care for my Quartz countertops. I have a question on the topic of stains. I’m originally from Puerto Rico and in our cooking we sometimes used Annato oil. I’m very careful when using, but sometimes accidents happen. Wondering how will that stain be taken care of. This is the kind of oil that the stain will linger for days. Only harsh chemicals will take the stain out. What is your advice.
Hi Sandy. I would be careful with harsh chemicals. Barkeepers friend is what I would recommend for quartz. Always test it out somewhere inconspicuous first. But that stuff is really great.
@Mark Tobin Kitchen Design its says right on the package for barkeepers friend "for non-stone countertops". I'd be nervous recommending it to anyone knowing this...
Really good vid. Do major companies make prefabricated quartz lengths like 112" x 26" with backsplash at decent prices?
Probably not 112". 120" maybe? Backsplash would be separate I think.
But I'm thinking you will need to go custom.
@@MTKDofficial Where does one find prefab vs. slabs?
Thank you for so many wonderful videos! Some question I have is do you think it is ok to use stock cabinets under quartz countertops? Such as would stock cabinets hold up long term ? And if you were to want to upgrade lower cabinets later on, would the quartz countertop have to be busted off and ruined in order to replace the cabinets?
Depending on the quality of the stock cabinets, I'd say sure. Most times you would be fine. If you upgraded later, the top could come off. Easier if there are no seams however. Though the new cabinets would have to match exactly in size, so you don't run into trouble. I would never recommend doing the countertop first if you are also planning on changing the cabinets. Do the cabinets first and later you can upgrade easier. But it can be done.
Thanks for the video! Have you used Vadara brand quartz? It has a look more like quartzite, but I didn't see the company on the list you have in the comments.
I haven't heard of this brand, but there are lots of brands popping up all the time.
Great informative video! I’m in the middle of a kitchen remodeling and choose a quartz countertop. I purchased a Calacatta Ultra quartz stone and Googled who manufactured it, which is MSI Surfaces. This company is not on your list. Is this a reputable company?
Yes. MSI is good. Some of these companies are under broader names. I’ve researched MSI before to verify.
Hi Mark! I have a question. I want to put a black quartz with sparkles on my kitchen BUT the sales person told me that black quartz does not tolerate heat well. He advised to go with black granite instead. Should I buy the granite? I really want it to be black with sparkles ✨ Ty!
Hmm. If you are going to be putting scolding hot pots on your countertop, then maybe not. But just use a trivet if you have a habit of doing that. Quartz is heat resistant to a point. However, the more material in it (glass, metal, etc.) the more resin. It's the resin that can be effected by heat.
The black granite is a nice choice too. Hard to say. Use a trivet either way actually.
Wow, this is very specific detail. Thanks! Question, can quarz edge rounded with bullnose profile? Seem that most quartz I seen did not have those.
Hey thanks for watching. You can get a bullnose profile, it just isn't that popular right now as far as edge treatments go. That's probably why you don't see it. Normally you'll see a small 1/8" radius.
Hi. Your videos are informative. I am planning to get a quartz countertop for kitchen. Other options are granite, nano glass and full body vitrified kitchen counter slabs. I have seen a brand Petrostone based in Pune, India. Brochure says it's made with Breaton Stone Technology from Italy. It mentions high grade quartz. It's economical compared to Caesarstone and Silestone and I can get Calacatta designs which I certainly can't with the premium brands. My question to you.
1. Is Petrostone a safe bet for quartz they give a 10 year warranty. Silestone is my 2 nd choice but can opt for a base grey shade and not the white ones
2. Should I consider full body vitrified tile...all designs available and very budget friendly
3. Is granite the safest bet. It's the most economical of the lot though I can go upto the grey shade of silestone
4. 3 cm slabs from Petrostone are placed to order while 2 cm slabs the only options from silestone. Is 2 cm thick slab sufficient or do we need 3 cm slabs
Once more thanks and waiting for your reply
Hi Michelle. Thanks for watching and leaving a comment.
Here's my opinion on your questions. Hope they help.
1. I have no experience with Petrostone. Although they use Breton tech, going up against Silestone or Caesarstone is tough. They have been in the industry for a long time and are two very trusted names. So personally I would probably go with your second choice.
2. I love vitrified tile, however I think large scale slabs are a better way to go. Have you considered porcelain slab?
3. I think granite is the safest bet overall in terms of durability and heat resistance. The only problem is you don't get a warranty on the material, only the finish (if it comes pre-sealed). At lease with quartz you do get a good warranty.
4. 3cm for sure. It's been the industry standard in North America for a long time.
@@MTKDofficial thanks. .
that was useful
I haven't seen these porcelain slabs here
We have 15 mm thick full body vitrified tile 240 x 80 cm which is an option for kitchen counter tops. But I feel they are prone to get chipped..
Looking forward to more videos
Brands of caeserstone and Silestone are only available at 20 mm here.
Main reason I considered Petrostone since I can order 30 mm
But guys here say 20 mm should be fine
The best explanation of quartz!! Many thanks.
Hey! Thanks for the comment! Very appreciated.
Can you please advise me on the following. I have a suede finish quartz kitchen countertop that shows all water marks, finger prints etc. that are driving me nuts. I have located a company that says they can hone, polish and seal the countertop. Is this something that can really be done at home or am I being fed a lie.
Well, quartz can be sanded and polished. That's how they get the finish at the fabrication plant. Doing it in the home is a pretty big job. Do they say how much? I would probably want to see some examples of their work. But it is doable.
Thanks Mark, granite how to remove oil from our hands from my granite.
I have tried so far the following a clay mixture powder that I mix with water. I’ve also tried baking soda with water, and baking soda with hydrogen peroxide 3%, I have also tried the mixture of the clay powder the hydrogen peroxide 3% and baking soda all mixed it into a peanut butter consistency then cover with Saran wrap and we will see how that turns out in two days. Thanks for all your information Mark appreciate you.
Thanks for the comment John. Do you know if the granite is sealed. Not sure if it will completely prevent oily stains. Sounds like you're trying all the right remedies. Hope it works for you!
We have seams in our newly installed quartz. I noticed they raise up a little. Can the area be sanded down? Will it effect or dull the color in that area? Is the stamp that deep? It’s 2cm.
Great video. About the seams, our L shaped countertop does have a seam that is visible to the eye and you can feel it with your nails. We had a couple of nicks that the warranty guy easily repaired with resin beautifully. But when I asked about the seam, he checked it with his razor blade and said it was actually better than most. If I could upload a photo here, I would. Was this person honest or just lazy? Every time I clean the counter I feel that seam catching, and I do wonder how much dust etc can accumulate over time? Thanks
Hmmm. I'd say most seams are somewhat noticeable. I'd say he was being honest. Hard to say without seeing it.
I am looking at purchasing a quartz countertop. The manufacturer has multiple thicknesses available (max 6 cm). To make 6 cm you have the options of either having two 3 cm slabs laying on top of each other and baked together (but if it's heavily patterned, you won't get the seamless look when looking at the slab from the side) OR having the edges mitered (where you can get a more seamless side view appearance but it costs more money since the manufacturer will need to try and match the edges of the slabs). Please consider adding this detail to your vid. Thanks for the video!
Hey, thanks for the info. That is not something I had considered!
I’ve never heard of 6cm slabs for countertops. I’ve hear of 6mm big differences. To get a 6cm look the edges are mitered or stacked. There is no benefit to glueing 2. 3cm stones together just to get the thick look for the entire slab . I own a countertop company. And the edges should line up because heavily patterned quartz slabs should be almost identical. It’s very costly to have pattern changes.
@@JS-zb1vv Cambria offers some countertops in 6 centimeters. Some people may like the look. If one uses a chiseled or rock face edge profile, the change in the pattern between the 2 slabs isn't as noticeable. I saw it in a showroom once.
@@ecdubytecdubyt yea but I don’t think it’s 2 full slabs it’s just a laminated edge.
@@JS-zb1vv I don't work in the field. The Cambria website and the showroom rep told me it was 6 centimeters thick - just sharing what I was told by Cambria with others. Since you're in the profession, feel free to verify if you'd like.
great info!! thanks for taking the time to do this video!
Hi! Thanks for the comment, I really appreciate it!
Home depot associate told me that ppl thede days selling quartz counter tops that are not sealed and will get stain vrry quickly from oil , food , coffee , dish soap liquid .. is that true ?
Well... maybe they were meaning quartzite, which definitely has to be sealed? (Just giving them the benefit of the doubt) Manufactured stones like quartz do not need to be sealed. They are manufactured to 0.05% porosity. There are however, brands out there that do not manufacture quartz to the same standards as the Breton patent. That doesn't mean that they are not good, but harder to verify if they stand up quality wise. Hope that helps
I work for a family with a huge kitchen who have this work surface and it’s awful, so hard to clean, shows marks, can’t use regular cleaner.
Would you be able to tell me if Venezia stone is a reputable company? I never heard of it but the sales guy said it's good.
Thanks for such a helpful video
Hi. Venezia is an importer. They bring in quartz and other stones from around the world. This is fairly common and not something to worry about. However, the issue is, where they are getting their slabs from. If you can find that out, then it would be easy to tell if it is a good quality stone. The sales gut should know this info.
Hey! I want to buy honed quartz and im super worried about sealing every other months and cleaning it. I have researching online but getting mixed information. What do you recommend? Would hones quartz be trickier than polished quartz in cleaning?
Quartz does not need to be sealed, whether it's polished or honed. A honed finish just requires a little more care in cleaning. Just don't be abrasive with it. Honed finishes show more finger prints and smudges and in turn people end up cleaning it more. hope that helps.
I want quartz. Hubby wants laminate. We older & just moved here 2yes years ago. Not planning on selling. However, when we're gone I'd like our daughter to get most of sale of this home. Hard choice
Go for the quartz Linda! It sounds like you deserve a splurge!! lol
My husband and I are retired and can afford anything. We chose laminate for reasons too long and numerous to go into here. Do your research.
Isopropyl Alcohol saved my laminate countertops and thermafoil cabinets from Sharpie! Would alcohol damage the quartz? If not, it works like a miracle.
Hi Haydée! On laminate it is great. Acetone as well. It definitely can be used on quartz, though it is recommended to water it down. Personally, I would reach out to the supplier before I used alcohol to clean, just because it is a solvent. Really good point to bring up.
Hairspray can remove sharpie ink, too. I have a 20 year old Silestone countertop . It has developed 2 hairline cracks that seem to run along parallel to the edge of the cabinets under them. Hmmm
@@MTKDofficial Do not use acetone on quartz. you run the risk of burning the resin. Alcohol is recommended by every manufacturer.
Just had quartz counters installed. Metal from cookware causes metal scratches when washing around the sink, rubber feet from counter appliances leave a black stains and substances like coffe leaves a stain; all of which has to be scrubbed off! I hate these counters. Had another house with granite and never had a problem and never saw the seems like I di with this new quartz (cream color).
Awesome input! Thanks for sharing your experience with quartz.
No idea if I got a bad batch or something, but our brand new (weeks old) counters are staining if you look at them wrong (I kid but just barely). Was making some old fashions with maple syrup the other night, didn't notice some syrup got on the counter top until I went back to clean up like 30 minutes later. The syrup left a stain that we keep scrubbing and got most of it to go away but you can still see it. Then a day later I had a dry pan, not hot, not used, just dry pan we had put down on the counter. Came back a few hours later and it left a rusty looking ring under it that we still can't get out. The pan itself is not rusted, it was brand new I had just gotten as a gift and put on the counter so I could wash it before storing it away.
Now I'm afraid to put anything on these countertops. Feels like literally anything will stain them. No idea what is going wrong with these things since before we bought them I looked far and wide for the most durable low maintenance options and quartz came out on top.
I'm assuming it has a warranty, so I would definitely get the rep to come out and have a look. It should hold up better than that. The big issue with quartz would be the resin and binding agents. They can possibly react chemically with certain things. However, if your counter can't handle a brand new pot there is something a miss.
This was very informative. I do have a question. Is quartz a good passive surface?
Hi. By "passive" do you mean less maintenance? If so, it does not require any sealing. Just regular cleaning as you would anything else. So, I suppose the answer is yes.
What about crockpots/slow cookers? I have 3 of them which get used a lot, several times a week and oftentimes 2 even all 3 at the same time. Currently have laminate countertops and whenever I use my crockpots I don’t normally put anything underneath them. I’m in the middle of deciding to update my 25 year old kitchen and thinking about upgrading to quartz counters. Also, what about air fryers and Instant Pots/electric pressure cookers? Currently, my instant pot sits on top of my stove so that when the pressure is released I turn the hood fan on.....changed from the having it on the open peninsula due to staining my ceiling, oops! Yes, that peninsula will be going too, lol! I just can’t seem to figure out what type of island to put in? Right now it’s got a raised bar all around it with 4 bar stools 🙄!
Hi Lori! Thanks for the comment and question. If your slow cookers aren't delaminating your laminate countertop, I would not worry at all about them damaging quartz. The stone will dissipate the heat evenly and more efficiently than laminate. Of course it's always advised to use a trivet "just in case" .
For the island, I recommend a one level extended depth island. With or without seating (whatever you prefer). Here's a video on island seating talking about the different options.
ua-cam.com/video/9EdAtCo2LjA/v-deo.html
Thanks again
@@MTKDofficial Thank you Mark for actually replying, I wasn’t expecting it as some other UA-camrs usually don’t. I literally just discovered your channel yesterday and started binge watching your videos, so yes , I did see the one about islands. By “extended depth” do you mean “overhang”. And would that be all around the island or just on one side? I’m looking for a functional island with storage without a sink nor cooking surface. We had water damage under the sink (not the first time) that resulted in mould that had to be professionally removed and dealt with and so all of this happened in just the last couple of weeks. Now that more retailers are allowed to open, (we live in Canada and our province has been in lockdown the longest for about the third time now!) we already have four kitchen and bath companies (need to update our bathroom too) booked to come out and give us ideas and quotes. So I’m trying to get as much information as humanly possible so that I know what they’re talking about and of all the videos I’ve watched yours are the easiest to understand. If I were to send you some pictures, could you offer some advice? Thank you again for all your helpful videos which are truly appreciated especially since this waterfall/mould problem just threw me for a loop!
@@LoriP123 thanks! I try my best to respond to comments. It’s one of the best parts for me. Definitely send some pictures. I’d love to take a look.
marknamytobin@gmail.com
Thanks so much for watching the videos.
I’m in Nova Scotia so I know all about lockdown lol.
@@LoriP123 so the island could have overhang on the back side. If you wanted seating. Or have some extra storage if you didn’t. Normally an island depth is 27”. With overhang or extended the depth it could be 36” to 42”. It makes for an excellent work surface either way.
ok, get your unit straight. 700 C degrees is over 1200 F. That is the temp aluminum melts. even 700 F sounds iffy.
I am seeing hot pans will mess up a quartz top. Even vinegar will mess it up. The weak spot is not the quartz, it's the resin binder.
heat resistant to 700C then you say use a trivet. that's wishy-washy. so... does a hot pan risk leaving a burn or heat ring? if i place a 500C pot onto the quartz for 2 minutes, will it visually damage the quartz?
Certainly didn’t mean to be wishy washy. The resin in quartz can and does burn. Always check with the fabricator on what they recommend. Under normal use it’s fine, just stuff out of the oven might be an issue.
Small typo in the text : LX HAUSYS (not LG).
they put Caesarstone brand in our new office and it kind of sucks. shows stains quite often. Like a drop of coffee leaves a stain that doesn’t wipe clean easily. Why is this?
The resin (binding agent) is susceptible to holding a stain briefly especially if they are acidic. I have a video where I test various stains. Some wipe easier than others. Dekton would have been a better choice.
Hi there! I watched the video hoping to find out how to get water stains out of a quartz countertop as well as to find out if you can remove scratches. I have watermarks all around the faucet and i got scratches from setting a ceramic planter on the counter. The video was awesome, but didnt hit on those. Do you have any suggestions? I saw 0000 grit steel wool for the water stains? Thank you!
Be careful not to make it worse by removing the sheen from sanding. I'd even try a Mr. Clean Magic Eraser. I've seen videos on repairing surfaces, but am certainly no professional at this.
Why does my quartz countertop feel sandy after wiping it down?
Interesting? I'm assuming you're not using an abrasive cleaner, or abrasive sponge. I don't really have an answer on that one unfortunately.
@@MTKDofficial nothing abrasive. It’s not immediate. Wiped clean at night, gritty in the morning.
If you do use something on your quartz countertop that makes it dull and takes the shiny ness away can that glossyness be restored? Thanks
Quartz can be refinished, yes.
I don't see Arizona Tile is on the list. What's the ultimate test for quality?
I love how you spread miss information about quartz. I work with it everyday and seen everything under the sun... prove me wrong
Educate me Matt, instead of assuming that I'll just blow you off. There's better ways to approach this conversation.
What do you recommend for repairing a chip? I have a small one on the edge of the sink.
Thanks for such an informative video.. Do you happen to know the name of the quartz in the video at 10:39 (where you are talking about warranties)? Thanks!
Well Kathryn, I actually think that is Crema Pearl, which is granite 🤦🏻♂️. It could be something like Atlantic Salt (Caesarstone) though.
@@MTKDofficial Thank you!