Hi there! if you do not have an HMI or other device that will update the RTC of the Modicon M221 maybe you can try to use the "scheduler" to manually adjust the RTC in the controller on those two days in the year: ua-cam.com/video/B8QGwgVHzKc/v-deo.html
Thank You so Much Your Videos have saved me so many Times!!! How would I send the converted %MWx values to a HMI so that the $Target.reads them as words not as BCD. Amazing videos keep up the great work.
hi sir, In Hmi GXU , we can not input time (HH:MM) how can i write on time and off time in it, because only has numeric entry and after that connect to M221 ?
Hi there! If i am not wrong i use shl and shr in the plc to “mix” the variables, so 2 variables are needed in the hmi. please write me another comment (no reply) so i can track this topic further.
Hi Saman, You can probably compare the time each day with the time configure on the HMI to trigger an action. I usually convert everything in minutes and then compare the different steps something like this: actual_hh*60 + actual_mm == hmi_hh_step01*60 + hmi_mm_step01
@@LeTomasAHUMADA How are you, i want insert time via HMI (ON_TIME and OFF_TIME) but how i can divide to hour and minutes in HMI variable , because in HMI has one variable for insert input that integer ?
@@samanabdullah8408 hi there! I recommend to post a new question everytime so i do not miss comments 😅, you can make shift to left and right then add them in order to get what you want
Thomas, I found a Schneider document EIO0000002445.02 about RTC Control and SNTP Client. Unfortunately I can't find any download link for the mentioned application example for machine expert. Do you know where I can find it?
Hi Marcel H, you will need to: 1) Open Machine Expert. 2) File > New Project. 3) Select "From Example". 4) In the "Examples" selector you will need to select the "RTC Control........"
@@LeTomasAHUMADA thank you! I tried the example and I always get the error Generic UDP issue. Does the SNTP client work in simulation mode with soft plc?
Any ideas on how best to update RTC for daylight saving time?
Hi there! if you do not have an HMI or other device that will update the RTC of the Modicon M221 maybe you can try to use the "scheduler" to manually adjust the RTC in the controller on those two days in the year: ua-cam.com/video/B8QGwgVHzKc/v-deo.html
Great video 👍 , Can you share the program with us please
Hi Hichem, Please find below the link to download that application:
schneider-electric.box.com/s/q5ngvbxhtufk5s6om1nipa7ksqbluthn
@@LeTomasAHUMADA thank you so much ❤️
Hi Sir, link download can’t active
Can you share the program again ?
@@LeTomasAHUMADA Hi Sir, link download can’t active
Can you share the program again ?
@@maulanaar-ragill2980 app.box.com/s/i2l2bijqof686f5piqe4d3rwgyerrpaf
Thank You so Much Your Videos have saved me so many Times!!! How would I send the converted %MWx values to a HMI so that the $Target.reads them as words not as BCD. Amazing videos keep up the great work.
Hi there! You will probably need to work first on the %SW variables to separate the values and shared them individually to the HMI.
hi sir, In Hmi GXU , we can not input time (HH:MM) how can i write on time and off time in it, because only has numeric entry and after that connect to M221 ?
Hi there! If i am not wrong i use shl and shr in the plc to “mix” the variables, so 2 variables are needed in the hmi. please write me another comment (no reply) so i can track this topic further.
how can i use RTC for daily temperature setting for 40 days , every days has especial temperature according to days setting via HMI ?
Hi Saman, You can probably compare the time each day with the time configure on the HMI to trigger an action.
I usually convert everything in minutes and then compare the different steps something like this:
actual_hh*60 + actual_mm == hmi_hh_step01*60 + hmi_mm_step01
Asslam Walikum brother
I have a question for you In a cable wire copper machine how can set lay
@@LeTomasAHUMADA How are you, i want insert time via HMI (ON_TIME and OFF_TIME) but how i can divide to hour and minutes in HMI variable , because in HMI has one variable for insert input that integer ?
@@samanabdullah8408 hi there! I recommend to post a new question everytime so i do not miss comments 😅, you can make shift to left and right then add them in order to get what you want
Thomas, I found a Schneider document EIO0000002445.02 about RTC Control and SNTP Client. Unfortunately I can't find any download link for the mentioned application example for machine expert. Do you know where I can find it?
Hi Marcel H, you will need to:
1) Open Machine Expert.
2) File > New Project.
3) Select "From Example".
4) In the "Examples" selector you will need to select the "RTC Control........"
@@LeTomasAHUMADA thank you! I tried the example and I always get the error Generic UDP issue. Does the SNTP client work in simulation mode with soft plc?
@@marcelh2341 for communication i recommend always have the plc