Courtesy & Foot lights installation - VW 2012-2019
Вставка
- Опубліковано 16 жов 2024
- Vehicle shown - 2018 VW Passat GT.
Courtesy/Puddle/Exit/Foot lights, LED, RGB, remote controlled, logo.
Similar for 2012-2019 VW Passat North American & Asian Models.
Also Watch " Rear doors courtesy lights installation - Audi/VW 2012-2019".
![BEST quality Ambient light interior installed on Passat B8 [ALIEXPRESS]](http://i.ytimg.com/vi/UwwzakXiRcU/mqdefault.jpg)
![Lp. Сердце Вселенной #30 ДВА В ОДНОМ [Один человек]• Майнкрафт](http://i.ytimg.com/vi/nrXy15orKhY/mqdefault.jpg)
Thank god ur doing all the same upgrades as me, just watched ur Paddle shift one too lol
Those Volkswagen lights are cool that show it on the ground nice
I have a 2015 vw Tiguan, australia, will the courtesy light work?
And will the wiring connections be the same?
Thanks
So the wires for the front door projectors can be plugged into any port in the harness??? What?
How would you install the courtesy lights without wiring coming with the purchase?
Trying to find out the same
Emil, foarte buna treaba! Inca ceva, garaju arata foarte sharp ;)
Merci!
I'm curious if you can retro one that doesn't have this though. So disappointing to discover that you just got a hole and reflectors.
My VW SHARAN 2018, don’t have light. The light is just red plastic glass. How can I connect it to wire
Thank you, is it the same for the 2016 Golf 7 R?
Which BCM module did you plug the footwell lights into?? And what PIN number???
18 &19
@@gigi19mai1did you plug into BCM plug c?? The last one??
@@gigi19mai1I’m a little confused
Clean job 👍🏿
Hello.
I have a Golf 5 from 2003.
On the front doors my windows regulator motors doesn't have the pins installed.
On the driver side with part number 1K0959793C, only have the 19 pin.
On passenger side with part number 1K0959792C, the 18 and 19 pin is not available.
Is there other way to install the door warning lights without these pins?
Yes. Use the method that I applied for my back doors. Check my other video.
Where do you get those door lights
Amazon or Ebay
Did you code for rear courtesy rear doors , you have to tell the door module the your adding them, I believe it goes in the rear door ketch’s
I fixed the rear doors to. Check my other video.
De unde ai cumparat firele si conectorii! Cum se numesc?
Amazon Canada
I did not understand where you plugged the footlights. Can you please explaine to me? or somebody tell me on which minute it is?
20:10 -up. The wire that is hanging powers up the foot lights. You need that LED bulb module which you will have to purchase separate.
Thank you 🙏
You got a link for the products u buy from amazon ?
In a few other tutorials, they say that I Should take pin 5 and 16 at the Golf 7 . Is it possible that both combination are working ?
Activate it first with VagCom/OBD and then try both pins.
@@gigi19mai1 I would also like to know how do you plug into the harness without splicing.
You didn't have to take anything apart those pens were meant to slide into the horse that comes out the stock light meaning you win a had said the door power nothing off
poti ajusta lumina cand deschizi usile sa lumineze mai tare si cand le inchizi sa lumineze mai putin ?
Pentru ca acestea sunt conectate cu lumina de plafon care este inchisa cand conduci, atuci aceste lumini se vor stinge odata cu cele din plafon. La alte modele, cum ar fii Cupra Formentor, am acesta optiune despre care vorbesti. Pentru asa ceva, luminile trebuie conectate cu luminile de la picioare (factory foot lights) unde exista. La acest GT nu am avut lumini la picioare.
@@gigi19mai1 eu am passat B6 highline și am lumini sub bord am.tras eu și sub scaune sar faZa e că cu beg normal ii pot regla intensitatea lumini din vag când sunt ușile închise dar cu led cambia nu pot regla doar din potențiometrul care reglez luminile in bord
@@yull5 Ai încercat se elimini firul rosu și cel verde de la fiecare LED? La Cupra asa am făcut și LED-urile își reduc luminozitatea cât vreau, doar ca au rămas pe albastru. De asemenea a dispărut și trecerea de la alb-albastru. Pe canalul meu am mai postat câteva video cu aceste instalări. Vezi exact cum funcționează acolo.
@@gigi19mai1 eu la mufa de sub bord la sofer am trei fire unul maro si doua fire sunt la plus verde si albatru sunt in acelasi pin si eu mam legat de unul din cele doua ca am vazut ca am plus
@@yull5 Eu m-a refeream la firele de la Led. RGB leds au 4 fire: rosu, verde, albastru si negru. Daca tai firele rosu si verde de la fiecare banda LED, atunci se vor aprinde doar albastru.
Can you add the Amazon link for the lights you purchased?
try this:
www.amazon.ca/HOCOLO-Multicolor-Interior-Lighting-Cigarette/dp/B07RF425V5/ref=sr_1_1_sspa?crid=C1R4PX95UPKJ&keywords=Car+Interior+Lights%2C+RGB+light+strip%2C+Led+Strip+Lights+with+Remote%2C+4pcs+36+LED+DC+12V+Multicolor+RGB+Music+Atmosphere+Neon+Under+Dash+Lighting+Kit+with+Sound+Active+Function&qid=1669906269&qu=eyJxc2MiOiIwLjMwIiwicXNhIjoiMC4wMCIsInFzcCI6IjAuMDAifQ%3D%3D&sprefix=car+interior+lights%2C+rgb+light+strip%2C+led+strip+lights+with+remote%2C+4pcs+36+led+dc+12v+multicolor+rgb+music+atmosphere+neon+under+dash+lighting+kit+with+sound+active+function%2Caps%2C168&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExU1dYNjAwODJMU0FOJmVuY3J5cHRlZElkPUEwMjc0Mjg0MUdMOVU3QjBXRFNaRCZlbmNyeXB0ZWRBZElkPUEwNzkwMzI0TFo2TEJWQ0NUS0VCJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==
I have e-golf 2015 and i cant find these light on amazon can you share the link where you buy it please ..
www.amazon.ca/gp/product/B07CZX5TH5/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1. It's currently unavailable!
Yea i got that unavailable , i found another product seller but my second question dose this product fit with my car e-golf 2015 ??? I appreciate your help
Hello, i have a passay 2012, when i put the pins + and - at 18 and 19do i have to code them after or?
Coding required - before or after doesn't really matter
Great work! Did you have any trouble re-attaching the driver side, center console kicker panel? Can't get mine to stay in place, keeps falling down!
Same here! Eventually found the right spot and it's good now!
@@gigi19mai1 any tips for finding that right spot?
@@jasonrubright3445 install the back side first ( next to hand brake), than install the foot side with the screw in an angle. The hole for the panel is a bit off
@@gigi19mai1 I'll give it a go. Thanks for the tip!
Can you send the link where to buy from amazon or what u type thanks
Did u find it
Can you please provide a link for what you purchased from Amazon, I can not seem to find them with the wires.
www.ebay.com/itm/2pcs-Welcome-Light-Shadow-Lighting-For-vw-Passat-B6-B7-CC-Golf-6-7-Jetta-MK5/153088552555?hash=item23a4c9ee6b:g:OPUAAOSwB-1YnvV6
Try these!
Will do, thank you for the reply. 😁😀
hi, please tell me for golf 7, are the pins the same?
It depends on the country of manufacturing!
@@gigi19mai1 Europe
@@mrvlad9618 The front might be the same, but the back is not. This method will work for any vehicle..ua-cam.com/video/-YgAgnEkAGM/v-deo.html
It will work on Golf mk7?Can you post a link for rear door installation?
Not sure for 2020 model but It could. If not, you can use this method for front and back - ua-cam.com/video/-YgAgnEkAGM/v-deo.html.
Can you take the VW logo out and just use the light?
You can purchase the ones without the logo
Anyone know what the cable is called
Thank you for the video. Is the 2018 tiguan the same??
Pretty sure
Do you need to code it on golf 7?
Yes
You do that on all 4 doors right?
For the back doors it's different! Please check my other video!
Where do you buy all the accessories?
Amazon
do you know where i can connect the same for a4 2017?
It might be identical, as the back doors fix I actually got it from Audi - ua-cam.com/video/-YgAgnEkAGM/v-deo.html
@@gigi19mai1 thank you for your quick respond, it is not the same as on that car, but i will try to figure out by myself, just as you show on this video, check every wire
i was find 12 v but when i connect the light it goes automatically to 0v, can be is somehow protected?
Where can I buy just wires
Try Ebay
No need to open front panels, just remove the old lights and plug in new ghost lights
If your car has preexisting wire harness then it’s plug and play. But I haven’t seen an easier way to do this when you don’t have the wire harness
Poti trage curent pentru benzile led din firele de la bricheta sau comutatorul de lumini si nu vor mai avea dimming :D Negru - Maro / Rosu - Gri :D ! Luminile de pe portiera cu logoul VW , am si eu puse pe Bora si dupa cam un an , de la deschis inchis , vibratii , logo-ul nu va mai arata la fel ... Se mareste si nu se mai vede clar ... au un fel de lupa in interior ...Oricum arata fain :D Pune si El-Wire ... Vezi la mine , daca te intereseaza ... seara e bestial ... mai ales la drum lung si daca pui doar pe usi nu e deranjant ... O sa mai fac un clip , in care o sa explic mai bine cum sa il legi de la lumina ce vine in comutatoarele de la geamuri de pe usi :D Este destul de simplu de facut , dar si daca o faci cum trebuie finalul e specatulos !!! Numai bine !!!!
La mine bricheta se activeaza numai cand motorul e pornit, Iar lumina de la brichetă se activează cand luminile sunt pornite.
Avez vous eu besoin du vagcom???
Oui
Oui
Thanks
I like that
you can wire rear door light to the lock in door Ive done it in past on another VW!! hopefully some time in future ill work on another one and create a video of my own
Is this an easier way to install a flood door lamp if you don’t have the pre existing wire harness ? My atlas just has a reflector there
@@surrealartisan4625 you can buy harness that to simply plug in the door connector pins but you will need to program computer via vcds for lights to work