Sharing this info because the owners manual is not to clear on Dyna models from 08-12. On Dyna model years from 2008-2012 you DO NOT use the Run switch, you only use the ignition key. Here's how. With the Fob in hand and working, make sure the Run switch is toggled to the off/kill position. Put your key in the ignition and turn on and off 3 times... on-off-on-off-on, press left turn signal 3 times within two seconds then the right turn signal once, the code will be displayed and you can change it at this time if you want or, just turn the ignition off. I hope this helps someone
Great explanatory video. Thanks.
Glad it helped!
Thanks for the help.I'll let you know how it turns out for me
No problem. Please do!
My dina wide glide 2012 is still asking for the pin but i have the fob close to the bike and funcional
@@juanocybe id remove battery for a few mins to reset ecu. This is UA-cam advice, not professional btw.
Sharing this info because the owners manual is not to clear on Dyna models from 08-12. On Dyna model years from 2008-2012 you DO NOT use the Run switch, you only use the ignition key. Here's how. With the Fob in hand and working, make sure the Run switch is toggled to the off/kill position. Put your key in the ignition and turn on and off 3 times... on-off-on-off-on, press left turn signal 3 times within two seconds then the right turn signal once, the code will be displayed and you can change it at this time if you want or, just turn the ignition off. I hope this helps someone
Appreciate you posting that!
Good stuff
Hope it helped!
I have a 2023 is this the same for it to change the pin
It should be similar
my bike is a 2009 sport bob dyna Fxdb
Read the comment by Greenmarine5. He explains for your model/year
I followed your instructions but it didn’t work for me. What’s up?
What year make model do you have
Good info bro. Now tell ME your code. I promise not to tell anyone 😅
😂
first of all dont listen to him second check contact battery first then the bike battery
Huh?