Thank you for this video series. As a novice contemplating a SuperBeetle project I really like your concise, no nonsense approach and have learned a few things already.
This is the first video I’ve seen that did not pop holes in the new floor pan down the tunnel side for plug welding onto the tunnel. What am I missing?
Bro great video!!! i am the happy owner of a 1966 beetle and we are in restoration process, my question is the floor pan size are the same in the early and late bugs? i mean the only difference between old and new models bug floor pans are the seat supports? Can i cut off the seat supports of a 1990 floor pan replace with the supports of my 1966? thanks!!!
Thanks Luis, yes. The floor pans are the same dimensions at the chassis for ALL year Beetles, and even Super Beetles. The only differences on the pans are the seat rails / mounts. A 1979 Super Beetle floor pan could be installed in a 1954 Beetle, etc.
I picked up the rollers at Harbor Freight and bolted them to some cut down front end supports that were welded to a tow bar mount. The bottom of the pan was undercoated afterwards, the topside was painted.
Thank you for this video series. As a novice contemplating a SuperBeetle project I really like your concise, no nonsense approach and have learned a few things already.
Yet again a very informative video! Thanks for all the info...
Very complete! Thanks
Great inro. thanks
Nice video. I also add a little bit more weld on the seat rails for extra support.
Good call!
Those floor pans worked out great and easy to install. Just would have preferred it not being primed with self etch out of the box.
That would be nice but none of our suppliers have that option.
This is the first video I’ve seen that did not pop holes in the new floor pan down the tunnel side for plug welding onto the tunnel. What am I missing?
Nothing, some people like to do rosette welds to hold the pan in place, I prefer seam welding the floor pan. Either will do the job.
@@Sam_Mebane awesome. Thanks for the response. As a newbie getting ready to replace the floors in my 60 beetle I don’t want to screw up!
Bro great video!!! i am the happy owner of a 1966 beetle and we are in restoration process, my question is the floor pan size are the same in the early and late bugs?
i mean the only difference between old and new models bug floor pans are the seat supports?
Can i cut off the seat supports of a 1990 floor pan replace with the supports of my 1966?
thanks!!!
Thanks Luis, yes. The floor pans are the same dimensions at the chassis for ALL year Beetles, and even Super Beetles. The only differences on the pans are the seat rails / mounts. A 1979 Super Beetle floor pan could be installed in a 1954 Beetle, etc.
You don't cover that white Mustang while cutting, grinding and spraying the VW chassis?
Nah, it's got a heavy cover of dust and is in desperate need of paint and bodywork.
Where do you get those front rollers? Do you strip off the rust inhibitor or rough it up and use por-15 or something over it?
I picked up the rollers at Harbor Freight and bolted them to some cut down front end supports that were welded to a tow bar mount. The bottom of the pan was undercoated afterwards, the topside was painted.
@@Sam_Mebanepaint and undercoat directly over the primer it ships with?
@@AustinScheib-fz6hr If you aren't going for a full show quality resto, absolutely. Just scuff it up and paint/undercoat it.
👍
Buen trabajo!👍
iGracias!
i hope when measure the old pan. not forgetting about the 1/2' or so you lost when cutting it out
If you measure before you cut like we did, then there is nothing lost.
Would it not be cheaper to purchase a whole new floor pan.
"Whole" floor pans aren't made, that would essentially be a complete chassis.
first