Harbor Freight Folding Trailer
Вставка
- Опубліковано 2 лип 2024
- Harbor Freight Folding Trailer. This is my Harbor Freight folding trailer model number1720 heavy duty. This trailer is item # 62647 and has a 1,720LB rating. In this video I show you you my 10 trailer mods, (really 11), that I have made to my folding trailer over the past 4 years.
1️⃣🟢The first trailer modification that I made was the flooring. I used 5/8" OSB plywood for the floor. I put three coats of polyurethane on both sides for protection. I used 3/8' carriage bolts to attach my flooring.
2️⃣🟢My number 2 mod was to add waterproof trailer lights. I use my folding trailer for my boat so these were a must have!
3️⃣🟢Number 3 was to upgrade to a 7 blade trailer connector. The 5 pin connector that came with my trailer was not compatible with my 2015 F-150.
4️⃣🟢Number 4 is the custom side rail system that I made. Every utility trailer needs to have a side rail system to strap down various cargo. These rails are made from 2x3's and I used 3/8' bolts with neoprene nuts to build the rails
5️⃣🟢Number 5 was to add a 1,000LB swivel jack. Every trailer needs a trailer jack with a wheel to move it around when its not connected to a vehicle. These trailer jacks are not expensive.
6️⃣🟢My number 6 mod was to ditch the 12" wheels and tires and convert to 13" Carlisle Radial Trail HD trailer tires. 13" rims are easy to find and very inexpensive. Having taller 13" wheels that are rated for 80 MPH instead of 55 is pretty awesome! I used 5mm spacers behind my wheels to keep the tires away from the trailer.
7️⃣🟢My spare tire mounting system allows me to store my spare tire for my folding trailer underneath the trailer tongue. This is convenient both on the road and while the trailer is folded up in storage. I also mounted a four-way lug wrench and bottle jack underneath the trailer floor so that I am always prepared!
8️⃣🟢This modification is arguably the best and most important of all of my mods. The Harbor Freight Folding Trailers FOLDS!!!! Once these trailers fold in half there is no built in mechanism to hold them together. No latch... I made an awesome latching system that safely holds the two halves of the trailer together while in storage and cleverly stows out of the way when the trailer is in use.
9️⃣🟢This simple little mod keeps my license plate out of the way when the trailer is folded up so that I can push it against the wall and the hinge lets the license plate drop back into position when the trailer is on the road. The first time my license place cut my arm is when I took a grinder to the bracket and made this mod!
9️⃣1/2🟢The cheesy plastic caster wheels that came with this trailer fell apart a few weeks after I stored my trailer for the first time. I fought with them for two seasons before I upgraded to the cast iron wheels that are on it now. So worth it!
🔟🟢Upgrading the wheel bearings on this trailer should be a priority for anyone who owns one. I removed and re-packed my bearings on a regular basis because I use my trailer for my boat. Even though I used quality marine grease and re-packed at the end of each season, after four years my OEM bearings were worn out. They are not a quality bearing to begin with.
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
-Merch--Merch--Merch--Merch-
Mr Fred’s Merch NOW AVAILABLE⤵️
mrfredsdiy.com
----------------------------------------
🙏Help me fund future projects!
$❤️$ Use the “Thanks” Button Above
OR
☕️ www.buymeacoffee.com/mrfredsdiy
----------------------------------------
Social Media
🔵 Join the Facebook conversation groups/mrfre...
🟣Follow me on Instagram: / mrfredsdiy
⚫️TikTok www.tiktok.com/@mrfredsdiy?_t...
🙂Full disclosure here, I do receive a small commission from traffic that I drive to my affiliate links.
••••••••••••••••••••••••••••••••••••••••
EBL Product Links
🔋⚡️EBL Rechargeable AAA Batteries Pack of 8 amzn.to/3oBYx4z
🔋⚡️EBL Rechargeable AA Batteries Pack of 8 amzn.to/3JbSWeZ\
••••••••••••••••••••••••••••••••••••••••
Amazon Links
Wheels & Tires
☑️13” Wheels-amzn.to/37kcdvE
☑️13” Carlisle Trailer Tires amzn.to/3bVCH9B
☑️5mm Wheel Spacers-amzn.to/3K9VvOe
(I used spacers to keep tires away from my fender brackets)
✅Waterproof Lights-amzn.to/3NR1xpi
✅7 Blade Connector-amzn.to/3udwQ5Q
✅ 2,000 Lb Swivel Jack amzn.to/3P5Xurj
✅Cast-Iron Casters-amzn.to/3KfVWqo
✅Wheel Bearings-amzn.to/3Jfnlaq
mrfredsdiy@yahoo.com
Mr Fred
505 E Windmill Lane
STE 1C -217
Las Vegas NV
89123
#mrfredsdiy #harborfrieght - Навчання та стиль
A great little trailer! 🟣Follow me on Instagram: instagram.com/mrfredsdiy/ Thank you to all of you wonderful viewers who have taken time to comment!
your Amazon links are dead
can you at least post the model numbers
Thanks for watching! I just checked the links for the wheels, tires and spacers and all three are working.
@@MrFredsDIY ok, I needed to do the bearings
Here is the link for XiKe Wheel Bearing amzn.to/3Alo6KN
@@MrFredsDIY thanks, when I tool it apart yesterday the back bearing seemed to be different than the front... it down seem to have the numbers on it 30205, if I figure it out I will update
This man is singlehandedly more innovative than any utility trailer company I have seen.
The strap to hold the folding side at 90 for counterweight is genius.
That tire upgrade is perfect!!! 👍💯💪
Thanks for commenting. I absolutely love the taller tires. I have a new trailer that I am making videos for. I will be upgrading those wheels and showing step-by-step how I did it. That video will be coming later this summer.
A latch like that definitely should’ve been a part of the standard design.
I agree! I am making a video for this latch as well. I have purchaes a new trailer and I am making individual videos for different modifications. Here’s a link to that playlist, which will include a latch video eventually.
ua-cam.com/play/PLN1CtBYDO93QRLWBz9EYQiLCTUErjC94K.html&si=DpUFgFx_QjK8gfr9
Awesomeness 1-10. Your voice is perfect for voiceovers!
Really great mods on the trailer, especially the latch.
Thanks for sharing! I’ve been thinking of getting one of these trailers for a while now to use for camping gear and our kayaks. Definitely going to get one now after seeing all of your modifications.
Thanks for sharing. I am thinking of getting one of these trailers and will stop back to watch this again when I start looking at doing some modifications. God bless you.
Every idea is so well thought out and executed.. unreal..
Great video! Great tip on folding the trailer for storage.
Great description great ideas 💡
love it 😊 thank you!
Amazing job with the mods I have this trailer and can wait to do some of the things you did with yours. Thanks for this content.
Custom mod anything with a repurpose is one of the best ideas and efficient.
Dude, thanks for your time, a lot of great ideas I never even thought of! Greatly appreciated my friend
Really like your side rails. They keep the bed at a true 4 x 8 size so one can haul 4 x 8 panels. Someone somewhere used Mdf for side panels cut to fit in the stake pockets and added ripped 2 x 4's for reinforcement for the Mdf.
Love yours Mods! Especially the latch system you created and the quick release fence bolts! I'm totally doing both of those!
Thanks for commenting. I just bought another one of these trailers to make videos with. I will be showing step by step all of these mods and probably a few more. Here is the first video▶️ua-cam.com/video/36aUyV72O_8/v-deo.htmlsi=mRyHFEKV6YHJO0sm
I used hinges in the corner of my rails, and padlock latches and pins in back. Pulling the hinge pins makes storage a breeze. I also put 6 light duty d-rings around the trailer rails. I used rivnuts. Makes securing loads a breeze. I use one of the ratchet straps to secure the trailer when folded.
Great video. I did several of the things you did nearly exactly how you did them. That said you have some special ideas all you own and I will be borrowing them (like tool storage, the folding latch, and spare tire bracket). Excellent thinking!
Thanks for watching!
You got a cheesy grin and radio announcer voice and by gum, I'm lovin' it. 😁 Thanks for all the great tips. I just bought this trailer and I greatly appreciate your words of wisdom. 🙏
Thank you! I appreciate your kind words!
Well done. Keep up the great work!
Glad I found your video. I just bought the foldable trailer myself, and love the upgrades/mods you made. Lastly yes, the latch system should be straight from the factory to hold the trailer together in the folded position. Thanks for the video.
Thanks for commenting and thanks for watching!
thank you these are great trailer upgrades!
This is a great video! With space constraints, this is the trailer for me, and the fact that my stepson is a welder means that if I can picture it, he can build it. :-) This video is a great jumping off point.
Good luck with your project! Thanks for watching!
Wow, very informative. Wasn’t expecting all that. I gave a big thumbs up.
Thanks for watching the video!
Great looking mods. I wish I could buy one all set up like that already.
When you get one do your mods slowly over time. Thanks for watching!
I had the HF trailer as well. I used 3/4 plywood. I primed it and painted it with oil based primer and paint on all sides before bolting it down, with relief cuts near the hinges. I installed the jack as well. My sides were like yours but I used deck screws and a washer to bolt them to the metal flanges. I used a bungee cord to hold the two sides together.
I opted to leave the license plate fixed, so I would cut myself every time I walked by it. Good video
That’s funny (not funny)! I have a license plate scar or two myself. The first year I had this trailer I backed into a tree camping and bent the license plate bracket so bad that on the way home it broke off in the corner and I dragged it for a mile or so. I welded it back together and after a few more mishaps I came up the folding solution. Thanks for watching!
Bought one as well - great ideas and LOL on the license plate as a great way to slash the jugular
I use balancing beads in the tires. Smooth ride always.
Super awesome. Thanks for sharing these great ideas. I've had a couple of these trailers and they are very useful.
Thanks for commenting! I use the heck out of this trailer.
Nice. I am in Vegas too and just bought this trailer yesterday. Taking it to Texas in a few days.
Well done, mate!
Wow. Great content sir
Excellent mods!!! A+++++++!
Good to know ST175/80R13 fits without needing to move fender higher. But I would still do that if it's not too difficult to maximize load capacity of the trailer.
Great video and ideas. The best I have seen and I have seen many!
Thank you for the remarks and watching the video!
Nice, I gotta get one of these, going build of these into a motorcycle carrier for track days! Or utility if moving or something.
I love this little trailer! It stores out of the way perfectly. Thanks for watching!
Great video and tips, thanks a lot!!
It’s a great little trailer! Thanks for watching!
Great ideas.
Thanks for the video. I’ve been looking at this trailer as a budget friendly convenient way to haul my fishing kayak. The 12” tires have kept me from purchasing this trailer already. It’s good to see that a 13” wheel and upgraded tire will fit.
Yes the tire and wheel upgrade was definitely needed. Thanks for watching the video!
Whats the bolt pattern size on this trailer? And what size on the 13s you put on?
Thank you for sharing.
good stuff, you've earned my subscription.
Great Ideas! I like your style! You think things through and I like that! I’m your new Subscriber!
So helpful 👍🏼
Nice job 💪👍
Way to go Mr Fred 👍🏼😬
very impressive
You neglected to mention your 5 lug hubs. I used waterproof 3/4 ply for the deck. Maintenance free and frankly my best upgrade. Nice video!
Great idea for the lug wrench, bottle jack storage and spare tire mounting! 13" tires and wheels are a nice upgrade as well. I'm planning on welding my frame together since it won't be folded, being used as a base for a tear drop.
Thanks for checking out the video!
Are there any cons to upgrading to bigger tires? I have 8inch wheels and like to up grade to 10, maybe 12 inches. Might have to raise the fenders.
Taller tires have so many benefits. I had to use wheel spacers for mine, so they don’t rub the frame, but I had plenty of clearance for my fenders.
A bit harder to load heavy items because the bed is higher.@@tinytim9453
Very foolish, constantly blasting the tools with road dirt and water. Just keep them in your truck.
Fred... Great Video all around...
I LOVE your onboard tools! That said I would include a more positive lock or holder for each item, and not count on only those spring clips to keep their grip under all circumstances. Would hate to have a 4-way launch from beneath the vehicle right in front of me one day!
I've had my HF foldable since about 2003 and have put it through literal tons of work. Once had 8 Volvo engines at a time on the thing! Also loads of cement bags and cinder blocks. The last couple weeks I've been doing a bunch of mods I've long wanted. One is smaller lights in welded frames, because I've gone through half a dozen sets of regular bolt on stock trailer lights. They always BREAK around the mounting bolts, not even counting the times I munted them on an obstacle or while dumping. I upgraded to LED side lights years ago and put an amber clearance light on the tongue by the hitch so aggressive drivers thinking of dipping in behind you get a clear visual sign that there's a trailer behind.
For the license plate which has gotten bent dozens of times over the years, I ended up making a solid frame on the caster mount, so the plate is "staring at the ground" when the trailer is folded up and stowed. I considered mounting near the original location using hinges or chains so it could move instead of bend/break, but every way I tried to configure this was more work and less safe for the plate in use, plus it would dangle into the way when stowed. Mounting on the caster mount bar solved so many problems without presenting any new ones. Recessed a light up under the frame rails to shine on the whole plate but not out at other drivers' eyes, without any fancy shrouding.
I upgraded to 13" trailer radials and need to get deep dish wheels, I have too little clearance to the frame and sides and one tire chafes badly when loaded. I also upgraded the bearings, seals, and grease very early in the trailer's life.
For hardware to connect the sides, search "stake side hardware." I have 2 kinds, 1 passively mates into the other when installed in the correct order which I have on the back of the dump trailer, the other kind manually latches and unlatches much like a gate lock, and any side can be removed in any order, for the lower/heavier open set of sides that are as likely to be used for un/loading from the side as the rear. Very evolved designs and heavy duty, they mate together smoothly and hold firm in the directions sides try to move relative to each other while in motion.
I built a teardrop trailer on one of these. I have over 24000 miles on it. I was thinking of upgrading to 13" wheels as the HF ones don't last very long; but I was concerned I would need to modify the fenders or buy expensive spacers. thanks for the links to parts that will work.
some good ideas here.
I'm on my fourth HB trailer. This one has 3/4 inch flooring, deck paint with multiple coats. I welded it at all bending points and welded in some additional steal on the tongue. Updated the lights with waterproof. Six years and no issues
Planning on getting one of these and welding it together as well. Did you upgrade the wheel size too?
Not yet, just four lug, 12' tired.
Very cool 😎
I love this little trailer!
Latch is a great idea. If you fold with back last, you don't need a strap. Loosen nut for tongue, and while folding up, let back drop on floor. Then fold the back up.
You have a great voice for video voice over or commercials
On your rail system, I would use door hinges, that way you just pop the pin when you want to take them apart.
your audio setup paired with your voice is awesome. it sounds like a voice-over in a studio setup but I think it is all recorded with your lap mic? Oh, and the contents of the video is great, too. Subscribed.
Fred, this is the first video I have watched from your channel but that was great! Sub’d immediately.
Welcome aboard! Lots of cool projects coming up!
Any chance you'd do a video detailing your wiring of this trailer? I have purchased an updated wiring harness, which carries the ground to all 4 lights without the need to ground it to the trailer, however, routing them has proven to be a pain! I've purchased upgraded bearings and seals (wish I had seen your affiliate link beforehand) and also Bearing Buddies for the hub. I'll use your affiliate links when I upgrade my wheels/tires. Thanks for your videos!
I wonder if HF updated the tires. The one on mine is from Carlisle and it's load B rated for 87mph per the tire manufacturers' website.
You rock
Really like the larger, 13” rims & tires. However, when I put mine on I did have to do some adjusting to the fenders or they rubbed the backside of the tires.
Not a big deal & definitely worth it.
I had to tweak mine a bit also. The spacers helped a bunch!
I bought one about 10 years ago. Shortly after that, HF sent me notice that the stock tail lights had a recall for water intrusion. They sent me some new LED tail lights for free.
These little trailers are pretty nice for the money. With a few mods they are even better!
its funny they did that because they are still selling them with the crappy ones now
Did you need to upgrade the axle with the 5 lug tires? I'm having issues figuring out what size hubs I need.
Great mods, suggest adding to save the. Original races and bearings repacked in zip lock bag in case of a rode emergency...like your tire spare idea.
Thanks.
Great idea! Thanks for watching!
How about quick disconnect for the wiring to the folding tongue? I have a spot this could be stored in if it were shorter. Fold the deck, wheel it into place and remove the tongue.
Hey Great Video! Do You Happen To Have A Lead Or Size On Bearing Seals? I've Found Some But There Thicker Than Stock.
congratulations on the video!!! after seeing your video I was sure that I will do a good deal buying this trailer. I live in NYC, a question did you have to change your document because you changed the wheel 🛞 to number 13?
This guy would be a great neighbor
Fantastic video! Lots of great information in a quick format. You definitely convinced me to buy this trailer and use your upgrades. One question: how do you secure your boat to the trailer?
Thanks for watching! I use four ratchet straps on the corners from the boat rail to the trailer frame.
*Just subscribed. Nice, informative video. Oh, and great radio voice, Boss! : )*
_EDIT: Hey Fred, won't that bottle jack leak hydraulic fluid when not stored upright? I think I'd read that somewhere, but I'm not sure if it's true or not. Again, thx. 👏_
Thanks for the comments. After reading your comment I checked the bottle jack fluid level and it’s still full. This mod was done two summers ago and so far so good!
Hard gang
OSB is for interior use friend. Any defect, or edge, is going to swell 15% and have no structural rigidity. Ideally marine grade or even fiberglass clad.
As for the thickness problem - that's where your welding expertise comes into play.
That rail fence looks cheap but the cost is over the top, especially when time counts. Next time I'm going to use scrap thin wall tube. There's got to be a better way.
GREAT INFO
But it makes more sense to buy an upgraded DIY TRAILER KIT - maybe. Gonna look for one.
nice mods.
Thanks!
Kinda sells me on getting one...or getting a better one with some of the upgrades already done for me...
One thing I hate is the location of the vertical bolts that you install when setting up the trailer. I made a wedge from 2 x 4 that fits in the frame channel and holds the bolt in place while being tightened. Cut down my time fiddling with them to about 1 minute per side.
Please send me a link showing what you had to do to upgrade the tires please
I like the idea of the tire increase. Where did you find them? I'm thinking of either getting them or just adding another axle of the same size to increase the load rating
There is a link in the video description for the wheels and tires. Thanks for watching!
I’d like to know how much it cost to do the upgrades. I remember seeing a deal on a better utility trailer from Home Depot for like $1,000 and I got it because of the money and time savings. It’s worked out well. It already had a beefier axle, wheels, bearings and deck.
For anyone considering buying a trailer. I just went through a nightmare and not sure it's finished. It took a total of 3 stores. I went online to look for the closet store that had heavier duty one in stock. The store closet to me had none, so I went to the second closet. They told me they do not have any. They had one sitting up front on display. It turns out the one on display they are counting as inventory. I told them I'd take it and they told me no. They know these trailers are often hard to find so they trick people into coming into that store location for the trailer, only to be told they actually do not have any, even though it's sitting right in front of everyone as a display. Very crooked or at least dishonest. Anyhow, they at least call another store but it's pretty far. They confirmed they had the trailer I wanted in stock. What was interesting is the guy was clear to me that they had both matching boxes. At the time this seemed odd to say but I didn't pay much attention to it. I get to the store and pick up a couple of items and tell them I'm there to pick up the trailer. They bring it out in two boxes. The guy gets nervous because he has to fill out the title stuff. Had a 'how to' binder, I assume the store created so the paperwork gets completed correctly. It was a disaster. He was coming things out and stamping in the wrong place. I was like hey man are you sure you know what you are doing. He asked a couple of people for help. They assured me all is good with the paperwork. I ended up going to the store next to me to have a manager review because it looked off to me still. She made a correction but no stamp in front of the title. I went to get the title and registration a few days later. They basically laughed at me. Told me to get an affidavit and correct the stamp location. I went to the store closest to me again for this. She was very helpful but had to call the store manager in the place I bought it from originally. I went back to get it registered and after a lot of people reviewed the paperwork they decided to do it but advised it could come back later as not valid. So it was a nightmare going through all this. Lots of my time wasted. I hadn't even put it together yet. Now get this. I open the large box with all the parts because I wanted to paint it with a paint that would not fade like the factory paint does. What's odd is i unpack a front cross member. In my head I'm like oh wow, I thought this only came with the light weight version of the trailer. I'm like sweet, they upgraded. I take all the red parts out and paint them. Looks great. Lots of time spent on it. I planned on putting it together this weekend. Even though I've watched at least ten videos on how to put it together I decided to read the manual. I almost crapped myself. The manual is for the smaller trailer!!!! They gave me the wrong trailer!!!!! I paid for the heavy duty version and they gave me the lighter version. Wth!!! It turns out this goes back to the comment about two matching boxes. They gave me the small box of the heavy trailer which has the wheels and springs. The large box is all the framing and axle of the lighter trailer. What a joke!
I've put so much time ahead work into this already without even assembling it, even have a wood deck purchased and cut. I can't return it at this point with all the registration fees paid, the frame painted and the store being an hour away. I will put it together and see how it turns out. Not happy about it at all. This also means the next person will get mixed boxes, or maybe it happened before me and I got the mixed boxes. This is just a warning for anyone thinking of getting a trailer.
First, call the store to see if they are trying to be crooked by showing a display as available inventory online. Two, when they bring out two boxes make sure they match! If you make it to three, demand a manager completes the paperwork and that the manager goes slow. Any corrections or scribbles will require you to go back and get an affidavit later.
If someone from Harbor Freight contacts me and makes this right I will let everyone know. I will be sharing this in many places to get the word out.
Nice trailer mods. I noticed that you have a vegas license plate, I’m also in vegas and been searching for diy enclosed builds. The trailer I have now is to small and not to the standards I like it to be.
These trailers are pretty sturdy. Thanks for watching!
Your F150 I promise has that 4-pin light connector. It's the bottom of the two. I've had 3 F150s over the last 10 years and all of them have had that connector.
Please describe step by step(if possible) adding the flooring. Looking at my trailor...did you just lay the board ON TOP of the existing bolts and THEN add bolts to secure the floor? If so, did laying the floor on top of the existying bolts create issues?
First, thanks for checking out the video! I did place the flooring over top of the frame bolts however, I used a Forster drill bit the size if the bolt heads to give relief to the flooring so it would lay flat. I also made sure that my trailer was square before I tightened everything down. Good luck with your project.!
Hi Fred. I just bought this trailer however it came with 4 lug 4.80/12" Carlile Radial Trail LH tires. Do you know if I can get a 13" radial for a 4 lug wheel? I've heard of people welding the frame at critical points as well to give a more sturdy frame. I'm starting to build a tear drop camper on the trailer but would like to drive faster than 55mph. Thanks for the video!
I’ve heard of folks welding the hinges. A weld could be places along the frame where the rear deck nests as well. If you figure out the bolt pattern for the 4 lugs you can see if a 13” rim is available in a 4 lug. You can take the trailer to Discount Tire or equivalent and have them tell you the bolts pattern as well as quote a price for 13’ rims. In the end you would have the information you need and could buy rims on the internet. Thanks for watching!
Great video. I will be buying one of these trailers and doing your same mods, especially the wheel bearing. Question. I plan to use the trailer to tow my small side by side UTV. Do you think I can make the workable area 52”x 8ft instead of 4x8?
I’m not sure of your tire span. The actual plywood dimensions are 4ft x 8ft. Thanks for watching!
I used diamond plate for the deck. Lighter than plywood and won't rot.
Since you upgraded to 13" rom & tires did you have to change fenders for everything to fit? Thanks.
I kept the same fenders, but I did have to adjust the brackets slightly by bending them to be more upright and not slanting out. I also used wheel spacers.
Wow really great ideas and well presented. How much you reckon all these mod costs? Wonder if it just makes sense to buy a better quality trailer that would come with these kinds of creature comforts built in
Thanks for the comments. It’s hard to find a folding trailer with upgrades. The 13” wheels are the real gem of these mods. With a better ride, a closer match to my truck and much faster highway speeds all for under $200.
MacGyver ain't got nothing on you SIR 👍💪
How tight do you turn the bolts? There are no torque specs anywhere except for the wheel itself...some of sheet metal bends with no force at all like the two 19mm that holds the leaf springs on....also the u-bolt spring plate bends quite easily when torquing down....any advice?
Thanks for watching. I had similar frustrations when I put this trailer together originally. After I put the springs and axle together I checked and rechecked the bolts after a few times after a road trip or two.
I made my harbor freight trailer into a non foldable and now I'm fixing to turn it into a double axle 4 X 10
Do you remove the 6 screws every time you fold up the trailer. We are looking for an easier way to fold it without having to put the frame screws back in each time.
I only use two of those carriage bolts, the two that face the side and go through the side rail of the trailer and the upright edge of the hanger spring rail. (This bolt is easily accessible between the tire and the caster bracket) I keep a 17 mm socket handy for this.
My HF trailer has the original 4-lug wheels on it. How did you replace them with 5-lug wheels? Thanks! Great video.
My trailer came with 5 lugs. It’s the 1,700 lb heavy duty trailer #62647. Thanks for commenting!
@@MrFredsDIY Ah okay! Mine is the 1450 lb. I bought it in 2005. #90154
How’s the trailer jack look on yours? I put one on mine and putting any load on it flexes and twists the frame.
Thanks for watching the video! My framework flex’s as well . It’s because the hitch frame is not a solid “A”. It’s attached to the trailer with the hinging pins so the entire thing flexes.
I have a silly question, which plates did you use. Did you just switch them from your car to the trailer or did you have to get a whole new one for the trailer
These trailers are considered “homemade” here in Nevada. After I assembled it, I took it to the DMV for an inspection. After it passed inspection I was able to get a title and registration which issued its own plates. Thanks for watching!
Which 5mm spacers did you use for the tire mod? Have a link to them? Any special issues?
These worked well. I did have to tweak the fenders but just by hand. Thanks for watching!➡️spacers here amzn.to/3llSEui
Nice tips! I got the same trailer but no plans for folding, my boat will stay on it. Definitely like the spare tire set up...oh damn I actually have the 1,195 lb cap trailer. Do you think it would still be easy to find those 13's for a 4 lug?
Those wheels might be hard to find. You can always take a wheel to Discount tire and see what they can look up. I was surprised that they sell a variety of generic white trailer rims.
@@MrFredsDIY I see some wheels and tires but unsure what all the compatibility specs are when it comes to hub n axle or if that even matters
Compatibility depends on “bolt patterns”. There are numerous bolt pattern charts on line that give specs and instructions for measuring. If you are unsure, it might be best to have someone like discount tire figure out what you need by taking them one of the wheels or driving the trailer there.
@Mr Fred’s DIY Garage School I've found some good info and sale of some 13" wheels...in your opinion since we almost have the same trailer do ya think those st175/80r13 would work? I will take measurements tomorrow..if not I did find some 4.80-12 tires with a 81mph rating on etrailer. In the end it's that higher mph that matters
Hey I have another question! Do you know of any tires or wheels that I could put on my trailer that would allow me to go 80-85 mph? The speed limits where I live are a bit higher. Or is 70 the max?
My Carlisle Radials say 81mph on them. The link is in the description.
Nice video thanks.
Does anyone know why these are not sold in certain states? They don't sell them here in PA. Just wondering if it doesn't meet some sort of Pennsylvania DOT requirement?
Good question! If I find an answer I’ll post it here. Thanks for watching!
Can you talk more about the bearing swap and new wheels and tires, please?
Here is the video for replacing the bearings Harbor Freight Utility Trailer Bearing Replacement
ua-cam.com/video/osH4BiW5Z0E/v-deo.html
These are the Wheels & Tires that I used ⬇️⬇️⬇️
☑️13” Wheels-amzn.to/37kcdvE
☑️13” Carlisle Trailer Tires amzn.to/3xo3RhV
☑️5mm Wheel Spacers-amzn.to/3K9VvOe
(I used spacers to keep my tires away from my fender brackets)
@@MrFredsDIY you are the man. Wish I ordered the bearings two weeks ago (wait time) before I picked up the trailer. Timing is everything.