Life saver man been thinking on this for about a year now lost key to spare nissan running around car! Our rv got towed today for BS wife needs wheels real bad! Bless your heart
So I’m looking at this but correct me if I’m wrong isn’t you ECU an OBD1? I’m looking at my OBD2 and it seem to have the same set up but just wanting to double check
On the early Nat's there was a hidden 4 pin plug hidden behind the glove box . Mainly Primera , 4 connection ,bridge 2 pins and 2 pins . I used to have the correct plug in plug , but mislaid , not sure how long they installed the hidden plug
On my NATS 1 (LED Lamp with two external fobs) i managed to remove NATS. All i have done is to find the Immo Unit from the NATS. Its located (in my Micra 1995) behind the glovebox and than behind the heating Box. Once you have found the Immo, you just put the wires 1&2 5&6 7&8 together! 3&4 you leave off. after you have connected these wires you can start your car without the fobs!
Hi I’m not sure if the set up is the same when you open the ecu lid then there should be 3 chips in a row like in my video If this is so then pull the middle chip
@@sunilramkarran8367 so what would be the solution for the 350Z? I have a 2004 model and this darn anti theft system is giving me random hell, here and there. Nissan tells me I need to get a new key. I just want to remove the system.
@@svoncampe 1. First option is the fix it. Those cars need one new key and the immobilizer ring around the ignition , cost has come down alot so it would be the easy way. 2. Send the ecu out to get it removed. I'm not sure if they still do it but UpRev was the place that did it pretty often
If I leave any of the other stuff on but take the chip out of the ecu will it still work or do I have to remove the ring the box and immobilizer for it to work
no you dont have to, you can leave all there, maybe unplug the electical connector from steering column plastic things near ignitio lock, and you are good to go
@@moderndaydelboy5355 ...i have open my ecu but it not same its only have 1 chip not 3 like your video...so i still cannot removed my NATs system..if have idea to removed my NATs system please lets me know i really appriciate it
Hi Iv only done this on the Nissan Almera GTI and 200sx S14A If your ecu had the same set up as in the video and you removed the correct chip then this should have worked have you also removed all boxes related to the nats system up behind the dash ??
@@moderndaydelboy5355 hi there. I also have an r50 pathfinder where I've engine swapped Identical engine. I also swapped the engine ecm and wiring harness but didn't realise this problem before I sent the donor car to scrap metal. I guess my question is where do I find the information (to identify the immobiliser chip on ecm circut board), as you have?
Life saver man been thinking on this for about a year now lost key to spare nissan running around car! Our rv got towed today for BS wife needs wheels real bad! Bless your heart
LETTUCE NO HOW IT WENT , and if she is now going - she is a goer sez you.
[Did the key turnup?]
You are a lifesaver. Thank you so much. My dad has a 2001 maxima and might help him do this project. Now we can use blank keys like the old days😁😁😎
Man, I fucken love you!!! Thank you so much for this information. It's ABOUT TIME I FOUND SOMEONE WHO KNOWS WHAT THEY ARE TALKING ABOUT! THANKS AGAIN!
Does this work for 2005 Nissan maxima with the vq35de
So I’m looking at this but correct me if I’m wrong isn’t you ECU an OBD1? I’m looking at my OBD2 and it seem to have the same set up but just wanting to double check
so removing this will let the car start up without a transponder chip key
Where ia located that metal box from where you disconnected the nats cip ? It work on nissan terrano 2? I need your help
On the early Nat's there was a hidden 4 pin plug hidden behind the glove box . Mainly Primera , 4 connection ,bridge 2 pins and 2 pins . I used to have the correct plug in plug , but mislaid , not sure how long they installed the hidden plug
Where and what i need connect?
I wonder if it will work on the Nissan Teana/Maxima VQ25HR I need to install maps?
I have a 1996 Almera GTi and suspect that the ECU might be faulty. If I replace the ECU will I have any issues with NATS?
Do you have to remove all the nats or just that chip and start it?
this is an excellent question
What about removing the alarm control unit?
Or you can find the fuse to the fuel pump and send power to the pump and bypass the system.
The immobiliser on shuts of power to the fuel pump.
@juliankure yes
LEGEND,,,,,what a geezer : - ]
I have a 1999 nissan maxima 3.0 and I can't find the nats chip in the ecu anywhere
On my NATS 1 (LED Lamp with two external fobs) i managed to remove NATS.
All i have done is to find the Immo Unit from the NATS.
Its located (in my Micra 1995) behind the glovebox and than behind the heating Box.
Once you have found the Immo, you just put the wires 1&2 5&6 7&8 together!
3&4 you leave off.
after you have connected these wires you can start your car without the fobs!
Do u have to remove the ring and box for it to start or can u just donthe chip
Sorry, where do you find this metal box containing the NATS 1/2?
It’s the ECM/ECU.
Wow that's really valuable.
Thank you for sharing your knowledge.
How about newer models?
no hope call an auto locksmith or visit dealership. even this vid is for 1 type of ecu
@@stevesimkins3918 yes i heard the name on the video thank you for replying back.
Will this work on a 09 nissan rouge? Just started having this issue and im in the middle of no where.
Im curious if i can do this to my 99 nissan maxima vg30
Cause no one local to me or the dealerships have the 16 pin harness to program a key
Only SR20
I have a 2002 Nissan Altima 3.5. The emu and nats are not connecting. I could pull this chip and see if it works?
And works it?
Found the NATS but where is the silver box you took the chip out of
can this work for 2003 g35
I want to find out how to how to figure out if I have the nets security system on my 2005 Nissan Xterra
All Xterras have the NATS system
That's work in my primera p10 1.6 1995 year old. Or not work?
Please tell me...
WOW! now my car can start with a screw driver...amazing!!!!
Hi did it work for you
Will this work on the nissan primera p12 2004?... imobilizer is going nuts... its a 2.0 16 v hope to hear from u
I need the same info. My NUTS has died some days ago. Sometimes the pump is running, sometimes not, but won't start anyway.
is it the same for ga engines?
I have an alerma xreg got a new key yesterday but the auto electrician couldn't get the new chip to work with the ecu system it's got nats on the car
Do that work on a 04 Nissan Pathfinder armada 5.6 v8
I don’t know Iv only used this method on my Almera GTI and S14 200sx
hello brother, is it same to nissan frontier d22 immobilizer removal?
I have a 2003 Altima 2.5 the internal components are different. How would I identify the nats chip?
Hi I’m not sure if the set up is the same when you open the ecu lid then there should be 3 chips in a row like in my video If this is so then pull the middle chip
tim did you find it and did it work ?
I’m going to try it on 2002 Altima 3.5
Just not sure which chip it is exactly… I opened the ecu but it’s not similar to the one shown. There is 3 similar chips next to each other.
@@miguelmaldonado4492 did you end up finding the issue . Did you pull the chip and did it work ?
Does this work on a d22 navara 2004
Hey, thanks for this Video!
Does this work also on the NATS1, where you have 2 extra key fobs to unlock the fuel pump and start the car?
greets
I’m not to sure it may work Iv had success on NATS 2 so worth a try my friend
And works it?
I cant try it right now. Gonna try in 1 month and than post my result
@@kyrillkary5002 ok
@@kyrillkary5002 well? My NATS doesn't have these circuit boards.... just loads of microchips
2005 Nissan Xterra I want to find out if I have the nets n a t s security system
Is it true that this method will make it so your obd2 scan tool no longer works?
This system doesnt even use obd2!
hello.
Please sell the immobilizer antenna in the video.
Thank you.
Does this work on the nissan frontier
Is this the same to nissan cefiro a32 vq20 engine ??
Hi I’m not sure Iv only seen it work on the Almera 2.0 GTI & S14 200sx
Good question, I want to do it for the VQ25HR
i try my cefiro too but nothing happened pls share the idea
I have a 350z would this work as well
No, different system
@@sunilramkarran8367 so what would be the solution for the 350Z? I have a 2004 model and this darn anti theft system is giving me random hell, here and there. Nissan tells me I need to get a new key. I just want to remove the system.
@@svoncampe 1. First option is the fix it. Those cars need one new key and the immobilizer ring around the ignition , cost has come down alot so it would be the easy way.
2. Send the ecu out to get it removed. I'm not sure if they still do it but UpRev was the place that did it pretty often
@@sunilramkarran8367 I appreciate it. I did learn that Z1 offers that ecu option as well. Waiting to hear back, but I’ll try UpRev as well. Thank you.
Which chip is it in a 2003 Infiniti QX4.?
I want to do this if you try it let me know I have qx4 also
Where is the mats immobiliser located on a k11 Micra
I have 99 infinity with n15 ecu nats failed the board is different. can you point in right direction ?
Look at the manual and wiring unit you will find what your looking for
Any idea if this will work on a 97 infinity q45 cima?
I don’t think it will Iv only done this n the Almera GTI sr20de ecu
Does anyone know what is the NATS chip on a Maxima 2000 ECU ?
Hi, does this work on Nissan Micra K12 2003
What about the maxima 2005
Se puede hacer en infiniti g35 2005
Wonderful
Does key still need programming
can you help me on my nissan murano, I dont know which one is the nats , its differant than yours.
Hi Iv it’s not worked on the n15 Nissan Almera GTI with the mats so if the layout is the same it should work other than that I couldn’t say yes or no
Hi ihave 93 Maxima how can I bypass the Nats ...car won't start?
just wondering if anyone knows if this will work on a primera p10 egt
Yes it does
I have a 2004 infinity g35 does this work on that because my ecu not reading my key ?????? Anyone???????
You ever figure it out ? i got an 03
I have a 2004 i35 will it work?@@monsesgarza4955
It’s funny how nobody has confirmed that they did this and it worked
will she work w/a Micra 1.L k11 ?
No only SR20
If I leave any of the other stuff on but take the chip out of the ecu will it still work or do I have to remove the ring the box and immobilizer for it to work
no you dont have to, you can leave all there, maybe unplug the electical connector from steering column plastic things near ignitio lock, and you are good to go
Will this work on a 350z
will it ? did you test it out?
Would like to know if you found out
Did this work or no?? I got an 04 350z that's got the good Ole red dot lol....
Any update?
Does anyone know if this can be done on 95 - 99 maximas
Hi I’d need to see inside the ecu is it bats 2 alarm system?
Waiting to hear the verdict here
Can this work on nissan cefiro A33 year make 2003
I don’t know Iv only tried on old Nissans
@@moderndaydelboy5355 ...i have open my ecu but it not same its only have 1 chip not 3 like your video...so i still cannot removed my NATs system..if have idea to removed my NATs system please lets me know i really appriciate it
Hi have a 1999 nissan primare i watch the video took out the chip the start but don't run can u help me
Hi Iv only done this on the Nissan Almera GTI and 200sx S14A
If your ecu had the same set up as in the video and you removed the correct chip then this should have worked have you also removed all boxes related to the nats system up behind the dash ??
@@moderndaydelboy5355 yea I remove it was the same computer as in the video
pls help me my Nissan cefiro a32 97 model i try that but nothing happened...
It's work in Nissan xtrail year 2005?
Do you have to try it...atcualy i have a same problem with my xtrial t30
Tengo una patrol zd30 cambie antenad inmobilaiser y no arranca y se prende l Y se prende luz d antena
If you remove the chip, do you still need to remove all the NATS gear?
This worked on my s14a off anyone was wondering because I know how gatekeepy the forums are
Did this yourself and it worked 100%?
I have a 2010 Nissan Sentra and don't know exactly where the NATS BOX IS
It's an ecu. Under dash passenger maybe..
Onde fica localizado Acu 241?
it works?
Hey I habe a nissan 200sx s14 and i think it is nats 1 but i m not Sure and i nee your help
Hi yes this works on s14 as this was the car we found out it was possible to remove nats from
@@moderndaydelboy5355 okay thanks I try it tomorow and I Tell you about it
@@passivemodusss7531 did it work?
@@passivemodusss7531 did this work for you ? Currently have a s14a sr swapped into a s13 and can't get the injectors to fire
@@SMOKEYBISHOP92 yes! That Video helpt me out
Please two chapter
Where is ecu from nats?
I have a 2001 Nissan Pathfinder. So I just remove it
hi this video is just what i have found out about the 2.0 SR20DE/DET i have not tried it on any other models
@@moderndaydelboy5355 hi there. I also have an r50 pathfinder where I've engine swapped Identical engine. I also swapped the engine ecm and wiring harness but didn't realise this problem before I sent the donor car to scrap metal.
I guess my question is where do I find the information (to identify the immobiliser chip on ecm circut board), as you have?
Will this work on a 2007 Nissan maxima
It works in navara/frontier d22?
Will this work on Nissan cefiro 1999 a32 v6 2.0
Wil it work on a Nissan pulsar n15 automatic sedan
will it work on a 99 infiniti i30?
Can this be done with the 1999 maxima?
my question, exactly. Did you have any luck? My 99 maxima is NATS locked down
It’s funny how nobody has confirmed that they did this and it worked
Hi will it work on a 2004 almera 1.5 petrol?
Will this work on a 2002 pathfinder?
Will this work on a 2008 pathfinder
Will this work on a 07 versa
Will this work on a 2005 Almera Tino?
Will this work for a 2002 Nissan Pathfinder