I have a question. I have your example code running, but I have the Adafruit 40 matrix LED panel and the text is scrolling to fast and I think the letters are to big, how to I resize it to put on my panel?
The schematic shows a 5 volt regulator going to Pin 30. The spec for Vin is 7 to 12 volts as there is a built in regulator on the Nano supplying 5 volts to the chip. A 9 volt regulator would be an ideal choice for the Nano and the 5 volt regulator for the 5 volt supply to the display.
from where did you get the 2nd program of scrolling text . coz from library(color palette) we are getting first program only . we need that program in which you have used char* text ( TEXT) . reply ASAP . thank you
Greetings. I would like to do this with RGB Led strip WS2812, for example, 8 (height) x 40 (width) but, how do I make the connections of one strip with the other? Is it from the bottom to top, from right to left, or from top to bottom, from right to left? Or is it otherwise? Thank you
Hello Bro Thanx a lot for sharing..... Bhai mein nay ws2812 RGB LED strip use ker ke 30x10 ka matrix banaya hai aur ap ke upload ki hui Arduino code file mein kuch changing ker apnay matrix per text chalaya hai masla ye aa raha hi k pora matrix nahi chal raha text sirf oper wali 7 rows per chal raha hai nechay wali 3 rows off rehti hai. isko kesay solve karoon??? dosra mein ye chahta hu k text chalanay se pehlay kuch RGB effect chalein effect chalnay ke baad text chalay...is k baray mein bhi guide karein plz....
Hello you are telling that they charge only 2 dollar for 10 pcb while ordering they charge some other charges. Which you people won't disclose about that charges.
Your line of code "NEO_MATRIX_COLUMNS + NEO_MATRIX_PROGRESSIVE + NEO_MATRIX_ZIGZAG," should be either _PROGRESSIVE or _ZIGZAG depending on the board, but not both.
OK, you can only use one at a time. EXAMPLE: Adafruit_NeoMatrix matrix = Adafruit_NeoMatrix(16, 8, DATA_PIN, NEO_MATRIX_TOP + NEO_MATRIX_RIGHT + NEO_MATRIX_COLUMNS + NEO_MATRIX_PROGRESSIVE, NEO_GRB + NEO_KHZ800);
o yeah! very easy home project)))) what you talking about? thats just electronic kit. not actually, and not easy way and price high. easy way is bay full kit from aliexpress. thats it
How you could change the size and style of the letter
I have a question. I have your example code running, but I have the Adafruit 40 matrix LED panel and the text is scrolling to fast and I think the letters are to big, how to I resize it to put on my panel?
I have built this project everything working fine but text message is not coming full any suggestions
The schematic shows a 5 volt regulator going to Pin 30. The spec for Vin is 7 to 12 volts as there is a built in regulator on the Nano supplying 5 volts to the chip.
A 9 volt regulator would be an ideal choice for the Nano and the 5 volt regulator for the 5 volt supply to the display.
Rgb led mai ice. Hoti hai ke nahi. Our konse hote hai
How many LEDs can be controlled with a single PWM signal?
Can some one place a link to the 1R5W resistor? I have not been able to find it neither on banggood not amazon
Want scrolling board size length 48 inch height. 5 inch please give suggestion
good job
display mirroring
I fix it by change the NEO_MATRIX_RIGHT part of the matrix to NEO_MATRIX_LEFT
You should linked where to purchase the arduino nano board... would be easy instead download the file and make and order into the page...
Brother, I want to ask for all the materials, can you send them along with PCB and LED.
Sir thank you for upload this informative video.
Sir if we use CJMCU matrix instead Ws2812b matrix then all the procedure will remain same?
I am looking to make a matrix of 30 of these in a long line, would this support that? Thanks
from where did you get the 2nd program of scrolling text . coz from library(color palette) we are getting first program only . we need that program in which you have used char* text ( TEXT) . reply ASAP . thank you
Greetings.
I would like to do this with RGB Led strip WS2812, for example, 8 (height) x 40 (width) but, how do I make the connections of one strip with the other?
Is it from the bottom to top, from right to left, or from top to bottom, from right to left? Or is it otherwise? Thank you
Contact me on my Facebook page
Hello my friend, you can provide a link to the scheme.
I don't know how to add the firmware please guide me
how to do with simulation
Why not use a pro mini
If I haven't a PCB like yours, I can use an standard PCB?
Did you Know how connections I need to do to have the same result?
Watch complete video
@@EasyHomeMadeProjects I watched 3 times, can you help me?
Hey can you vertical scroll ???
DC-005-T2 a replacement for the jack plugL7805CD2T-TR for the Linear Voltage regulator
Wouw muanteb bro...i like it
how to give rainbow colour to text
Wow Great bro best work
how to make 10*20 feet led screen
Can I give the diagram on pcb?
Wow nice work good job
hi brother where we get this kit ,
Hello Bro
Thanx a lot for sharing.....
Bhai mein nay ws2812 RGB LED strip use ker ke 30x10 ka matrix banaya hai aur ap ke upload ki hui Arduino code file mein kuch changing ker apnay matrix per text chalaya hai masla ye aa raha hi k pora matrix nahi chal raha text sirf oper wali 7 rows per chal raha hai nechay wali 3 rows off rehti hai. isko kesay solve karoon???
dosra mein ye chahta hu k text chalanay se pehlay kuch RGB effect chalein effect chalnay ke baad text chalay...is k baray mein bhi guide karein plz....
Good bro...Keep it up
Wht is that clip stand name
Excellent project
Awesome Dear Friend........
any chance of the gerber files for the board
Where are the files for the PCB?
what can a scrolling sign used for, in personal use?
U can scroll date time day month year .. hahaha
sir is ka circut diagram b bta do mene experiment k lye total ghar m bana h
Great job!
Hello you are telling that they charge only 2 dollar for 10 pcb while ordering they charge some other charges. Which you people won't disclose about that charges.
Obviously there are some shipping charges. And these are different in different countries.
PCB estructured sir ?
Around 16+2 dollar they charges Additional.
please link in gerber file .
Warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-string]
Jlcpcb how mainy shiping charge
See their Web
Text??
Your line of code "NEO_MATRIX_COLUMNS + NEO_MATRIX_PROGRESSIVE + NEO_MATRIX_ZIGZAG," should be either _PROGRESSIVE or _ZIGZAG depending on the board, but not both.
OK, you can only use one at a time.
EXAMPLE:
Adafruit_NeoMatrix matrix = Adafruit_NeoMatrix(16, 8, DATA_PIN,
NEO_MATRIX_TOP + NEO_MATRIX_RIGHT +
NEO_MATRIX_COLUMNS + NEO_MATRIX_PROGRESSIVE,
NEO_GRB + NEO_KHZ800);
can you make an automatic door opening system for a hen house?
Pls send this design
YOU CAN GIVE ME GERBER FILE PCB BOARD? IN LINK DESCRIPTION.
انا اريده ايضا
wow great mindblowing beautiful...
First comments nice sir
Great
Cool
awesome
Shakil Ahmed ను no animalsex
Please made blutooth
Exlent
Masha ALLAH
Nice
i want you to make one for me and i will pay for that do you have an email to make a deal ?
o yeah! very easy home project)))) what you talking about? thats just electronic kit. not actually, and not easy way and price high. easy way is bay full kit from aliexpress. thats it
spammer
How to adjust he font size? alone