With the crimping of the wires, I find it easier to put the connector in the tool first and start the crimp so it just holds the connection. Then put the wire in and crimp away.
Ever weigh the total wire you've cut-off? Curious how much weight was saved with your wiring "clean-up". Back when I raced decades ago and shaved weight anywhere I could. People seem to forget copper wire, for what it is, is heavy.. Great Video = new sub
Could you specify the crimping tool you use for those pins you are putting on? I have the set and normally just use my tiny pliers and crimp them all individually but I have been after the right tool for some time.
But, But... where's the black tape, multicoloured zipties & elastic bands.? Your wires are all the same length & don't even loop around the bodyposts for goodness sake... And is that HEATSHRINK I see.?? Pfffft... Next you'll be using the correct screws with only one type of driver head.!😉 😉 😂 😂 👍 Seriously though, that's a great job, I'm just jealous because none of my RCs look that good.! 😉
Looks great!
Awesome work!
With the crimping of the wires, I find it easier to put the connector in the tool first and start the crimp so it just holds the connection. Then put the wire in and crimp away.
Ok cheers for the tip, I’ll give it a try on the next one
Looks very neat and tidy indeed. You are definitely the man to have a look at my new B7 project, car is built just needs Electrics installed 👍🏼
Thanks very much, yes came out well this one!
@@MH-RC would love you to work your magic on the new build
Nicely done. Any change on a link to the pins kit you used hopefully it's
available on amazon
www.amazon.co.uk/Connectors-Queta-1550PCS-Crimping-Connector/dp/B07S1SDKSC/ref=sr_1_5?dib=eyJ2IjoiMSJ9.eA6_78eG50Wq2Pri0gfstfL_IE6VjlaDLLU-OKwaPxAIMdRNuURh9smYjYOELwO_6pZ5PS8xCt92X7IAzrVn4U7--KAgprBMdkGoqJPKOL1z_4WPnLFbx5SoW2XbR6lrxpj1DRshibz4z-yJ3RSn6kT0joib_Bik-z-b9nGCMsQ0sF_3x1UBEJPHayFL7kN_kTMpg1GLN33yqFMmbId1zeV5znAV0s3dDH495xxFZDzxnRz3BdRX3ygTqQow7-Tnti2Z8YCMwYG-pu3AWAhhak4AGbT8HMXOKKLWgqV1rRw.S4DdtYvH8adTqovnxjZATUHbIwmG8mHYd3T_F2rPu88&dib_tag=se&keywords=servo+crimping+tool&qid=1712585665&sr=8-5
I'm about to build one so this is really helpful. Thank you and I just subscribed to your channel. 👍👍👍👍👍👍
Thanks for the sub! 👍🏻
Cable management for the win! Bravo! new sub!
Thanks for the sub, much appreciated
Ever weigh the total wire you've cut-off? Curious how much weight was saved with your wiring "clean-up".
Back when I raced decades ago and shaved weight anywhere I could. People seem to forget copper wire, for what it is, is heavy..
Great Video = new sub
Nice!
This b74 looks like my 22x-4
When are you going to get that 1/8 Agama out!
Soon mate! just need to order some new lipo's, I'll do a vid on it soon and get up to Herts for a practice day
Really neat, do you have a link to the crimping kit?
no reply about a link for the connector and crimping kits, what a surprise .......
www.amazon.co.uk/Connectors-Queta-1550PCS-Crimping-Connector/dp/B07S1SDKSC/ref=sr_1_5?dib=eyJ2IjoiMSJ9.eA6_78eG50Wq2Pri0gfstfL_IE6VjlaDLLU-OKwaPxAIMdRNuURh9smYjYOELwO_6pZ5PS8xCt92X7IAzrVn4U7--KAgprBMdkGoqJPKOL1z_4WPnLFbx5SoW2XbR6lrxpj1DRshibz4z-yJ3RSn6kT0joib_Bik-z-b9nGCMsQ0sF_3x1UBEJPHayFL7kN_kTMpg1GLN33yqFMmbId1zeV5znAV0s3dDH495xxFZDzxnRz3BdRX3ygTqQow7-Tnti2Z8YCMwYG-pu3AWAhhak4AGbT8HMXOKKLWgqV1rRw.S4DdtYvH8adTqovnxjZATUHbIwmG8mHYd3T_F2rPu88&dib_tag=se&keywords=servo+crimping+tool&qid=1712585665&sr=8-5
@@abruptlyblunt www.amazon.co.uk/Connectors-Queta-1550PCS-Crimping-Connector/dp/B07S1SDKSC/ref=sr_1_5?dib=eyJ2IjoiMSJ9.eA6_78eG50Wq2Pri0gfstfL_IE6VjlaDLLU-OKwaPxAIMdRNuURh9smYjYOELwO_6pZ5PS8xCt92X7IAzrVn4U7--KAgprBMdkGoqJPKOL1z_4WPnLFbx5SoW2XbR6lrxpj1DRshibz4z-yJ3RSn6kT0joib_Bik-z-b9nGCMsQ0sF_3x1UBEJPHayFL7kN_kTMpg1GLN33yqFMmbId1zeV5znAV0s3dDH495xxFZDzxnRz3BdRX3ygTqQow7-Tnti2Z8YCMwYG-pu3AWAhhak4AGbT8HMXOKKLWgqV1rRw.S4DdtYvH8adTqovnxjZATUHbIwmG8mHYd3T_F2rPu88&dib_tag=se&keywords=servo+crimping+tool&qid=1712585665&sr=8-5
Could you specify the crimping tool you use for those pins you are putting on? I have the set and normally just use my tiny pliers and crimp them all individually but I have been after the right tool for some time.
www.amazon.co.uk/Connectors-Queta-1550PCS-Crimping-Connector/dp/B07S1SDKSC/ref=sr_1_5?dib=eyJ2IjoiMSJ9.eA6_78eG50Wq2Pri0gfstfL_IE6VjlaDLLU-OKwaPxAIMdRNuURh9smYjYOELwO_6pZ5PS8xCt92X7IAzrVn4U7--KAgprBMdkGoqJPKOL1z_4WPnLFbx5SoW2XbR6lrxpj1DRshibz4z-yJ3RSn6kT0joib_Bik-z-b9nGCMsQ0sF_3x1UBEJPHayFL7kN_kTMpg1GLN33yqFMmbId1zeV5znAV0s3dDH495xxFZDzxnRz3BdRX3ygTqQow7-Tnti2Z8YCMwYG-pu3AWAhhak4AGbT8HMXOKKLWgqV1rRw.S4DdtYvH8adTqovnxjZATUHbIwmG8mHYd3T_F2rPu88&dib_tag=se&keywords=servo+crimping+tool&qid=1712585665&sr=8-5
But, But... where's the black tape, multicoloured zipties & elastic bands.?
Your wires are all the same length & don't even loop around the bodyposts for goodness sake... And is that HEATSHRINK I see.??
Pfffft... Next you'll be using the correct screws with only one type of driver head.!😉 😉 😂 😂 👍
Seriously though, that's a great job, I'm just jealous because none of my RCs look that good.! 😉
lol! Glad you like it! :)
something to do when the wife is having one of those days.
I don't use wires or solder. I connect my Motor, ESC, Servo, and Receiver via Bluetooth. It has that Pro Platinum look.
I guess your customer is too lazy to do this himself.