My magician MAX 2 is on my way😃. Need official printer setting info with OrcaSlicer 2.11 with Mac OS. Mingda products is not listed with this Slicer. Any helps is appreciated.
Sorry, but I didn't find this all that helpful as a new member of the 3DP community. To start with "Number 5 sucks and here's why" then roll into "Number 4 sucks and here's why" isn't great. I almost shut it off but when I noticed the video was only 4 minutes long I just let it run. I guess what I'm saying is, in my experience a top 5 list shouldn't highlight more negatives than positives.
Cura should stop updating their app and see if it can actualy slice,ive been on it for my old printer for years and cura 100% fails to slice EVERY SINGLE TIME its been years REALY CURA , WHATS THE POINT ???
Definitely understand the frustration but from what you're saying it sounds like its more of a hardware issue on your pc side not the slicer, we rarely if ever have issues with cura not slicing, takes a minute sometimes but its never just failed to slice.
Cura takes about as long as it takes to go shoping while you wait im beyond frustrated because its always been a good slicer and i yhought this mess would get fixed but its been years and now i need the old bog maxhine again.if only cura could slice like every other slicer.its only cura that slices for days if you leave it
@@stanleywhite5477 Cura puts alot of load on your cpu when slicing so if your pc is older or has a slower cpu with less core count its gonna take it a minute.
What slicer do you use for your printer?
My magician MAX 2 is on my way😃. Need official printer setting info with OrcaSlicer 2.11 with Mac OS. Mingda products is not listed with this Slicer. Any helps is appreciated.
Sorry, but I didn't find this all that helpful as a new member of the 3DP community. To start with "Number 5 sucks and here's why" then roll into "Number 4 sucks and here's why" isn't great. I almost shut it off but when I noticed the video was only 4 minutes long I just let it run.
I guess what I'm saying is, in my experience a top 5 list shouldn't highlight more negatives than positives.
Cura should stop updating their app and see if it can actualy slice,ive been on it for my old printer for years and cura 100% fails to slice EVERY SINGLE TIME its been years
REALY CURA , WHATS THE POINT ???
Definitely understand the frustration but from what you're saying it sounds like its more of a hardware issue on your pc side not the slicer, we rarely if ever have issues with cura not slicing, takes a minute sometimes but its never just failed to slice.
Cura takes about as long as it takes to go shoping while you wait im beyond frustrated because its always been a good slicer and i yhought this mess would get fixed but its been years and now i need the old bog maxhine again.if only cura could slice like every other slicer.its only cura that slices for days if you leave it
@@stanleywhite5477 Cura puts alot of load on your cpu when slicing so if your pc is older or has a slower cpu with less core count its gonna take it a minute.