With the mulching teeth, how much of a stump is left above grade? Does it grind down flush with the ground or does it leave an inch or two? I ask because I would like to eventually use a zero turn mower once the grass grows back. Thanks.
Yes definitely! I was going to get one myself but the 60 inch is the exact same width as the tracks on the 65 so it works well with fitting in right places but it’ll run a 72 no problem!
These are goin to be a little cheaper mostly because they are cheaper than a mulcher and the wear parts are much cheaper than a mulcher, just need to figure out your daily cost/ fuel/ travel and how much profit you need to make to go out an cut per day
Would it not of been more cost effective for the property owner to just have the Fecon mulching machine do the whole job. It’s only one acre. A good operator with a 90 hp or larger machine should be able to tackle that whole job in a long day.
Hey man, I have a 2nd Gen Ram 3500. It’s a 96 dually. The previous owner for some reason put it to a single rear. I’m putting it back to a dually and am looking for wheels and tires. What wheels and tires did you have on yours? Seams like the wheels are 6 inch wide and tires 12.5 . Can a tire that wife be mounted on a wheel that wide ?
Love Guss, the miracle mule in the background.😂
With the mulching teeth, how much of a stump is left above grade? Does it grind down flush with the ground or does it leave an inch or two? I ask because I would like to eventually use a zero turn mower once the grass grows back. Thanks.
Keep up the good work.
Thank you
Can you share the material that you use to strap the Kubota to the trailer? I like your setup
Quick binders on Amazon 3/8 chain
Will you come back to follow up when the Fecon mulched is on site?
Do you think the 65 would run a 72" terminator xp? I have the same machine but would be doing more grass and small brush
Yes definitely! I was going to get one myself but the 60 inch is the exact same width as the tracks on the 65 so it works well with fitting in right places but it’ll run a 72 no problem!
Is your 65 a high flow machine , or standard flow. I have the rut brush hog as well and love it. I run it on a Kubota 95-2
It’s a high flow machine
Im thinking about getting me a brush mower. How do u charge for these vs a mulcher
These are goin to be a little cheaper mostly because they are cheaper than a mulcher and the wear parts are much cheaper than a mulcher, just need to figure out your daily cost/ fuel/ travel and how much profit you need to make to go out an cut per day
Where at in Florida are you?
Southwest Florida, between Naples and Sarasota
Have you run a mulcher with the 65? Debating a svl65 vs 75 for farm use with a 48” disc mulcher.
I’m in the market now for a drum mulcher I’ll get a video up when I get mine
Would it not of been more cost effective for the property owner to just have the Fecon mulching machine do the whole job. It’s only one acre. A good operator with a 90 hp or larger machine should be able to tackle that whole job in a long day.
Hey man, I have a 2nd Gen Ram 3500. It’s a 96 dually. The previous owner for some reason put it to a single rear. I’m putting it back to a dually and am looking for wheels and tires. What wheels and tires did you have on yours? Seams like the wheels are 6 inch wide and tires 12.5 . Can a tire that wife be mounted on a wheel that wide ?
Wide *
Yes I ran 35x12.5 and also 33x12.5 you can do it on those stock 6 inch wheels
How long does it take you, on average, to clear an acre of 3-4 year overgrowth?
Depends a lot on the material but underbrush can be a few hours
The footage from 5:30 or so on was basically useless to watch unless you wanted to seizure…the beginning speed will do for future. Best wishes
Thanks
Is that a high flow?
Yes it is
Lost me the music.
Oh okay
Would have to agree 100 percent.
too speed up man!