Putting My Pro Drift Car On A Rotisserie!
Вставка
- Опубліковано 4 січ 2024
- This is absolutely insane, never did I think Id have the car upside-down in my shop. Hope you all enjoy!
Follow me on IG @instaagrantt
www.tirestreets.com
Use code GRANT at checkout
100 likes and i'll leak the full build plan
safari car!
savage
@@instaagrantt
Dut coming in clutch
@@instaagranttit’s getting powder coated isn’t it.
Don't you have your own BMW "racecar" build there Dut, let Grant think we don't know what he is doing, lol, he is so excited.
You and Jimmy and killing it with the pro builds
Small tip, if you level the car with the centre of the rotisserie you will litterly spin it with one hand on your own.. adjust the threaded bars on the front and rear to get the car to the centre
Glad you made a UA-cam Grit. Your energy and all the homies around you. It’s cool to see different aspects of what’s going on. Get that 100k!
This is unreal! Scary to see how quick your workshop is filling up!
Welds look a tad cold but will be sufficient for its purpose. Good job! Might want to practice pushing instead of dragging. This will allow you to shape your bead profile a bit and get you a more desired look.
noted! friend of mine told me to try to push the weld as well. i’m on it!
If it sounds like your cooking bacon or a little hotter you should be good on settings just adjust yourself in speed.
When welding thicker stuff its wise to chamfer the edge so you get better penetration, in this case 45 degree angle on the square tube. Clamping the flange to your working surface (preferably metal table or even a sheetmetal on top of that wooden table) will prevent some of the warping. Also its easier for beginner to just weld straight and not try to use that "walking cup" method and if you need "more weld" just do another pass, this also helps with the warping because you can move faster and the heat dosn't stay in one place too long.
About exactly what I wanted to comment!
Absolutely love your energy, love the way you express it, even before you made youtube, i was already the biggest fan, and just waiting and anticipating for you to start picking up the camera
you are such a big inspiration for not only myself, but also for many other people! KEEP UP THE F-ING AMAZING WORK!
Grant, you definitely have the most real experiences caught on camera out of most people on UA-cam. You explain the difficulties and also the triumphs. You don't try to hide the things that go wrong, and you are just an honest person when it comes to sharing your experiences. Not only do I, but everyone that watches your videos appreciates this. Your content is amazing and we will always keep watching!! Thanks! ❤✌️😁
The background music lmao makes the whole process seem so intense!! love it! keep up the great videos!
Let’s go!! Definitely excited to see this project
You guys were just having fun rotating the car around 😅 I had a ball watching
I'll drop your name on all of Adam's videos lol 😂 100k here you go!!! 💯🔧🚗🏁®️
My BOYYY! Not sure how I'm just seeing now that you started a channel, but wish you nothing but the best man. Absolutely loved the excitement of putting the car on the rotisserie.
Love your work. Btw those vocals 🙌
All the boys are stepping the game up this year. Im stoked to see Grant and Jimmy's pro drift builds come together over the off season. I can't forget about Spoons awesome ass 86 K24 swapped drift car. It would be very interesting if either Grant or Jimmy competed in FD pro spec
Jimmy and Grant gotta do a Spoon's Welding Course 101!
Rock n roll riffs in background 🤘👍👍👍
Great content keep them coming.
just remember mate...."a grinder and paint makes you the welder you ain't" 😀👍
I love grants excitement and enthusiasm. I can't wait to see the end result .
Litteraly just built a rotisserie & got my s13 mounted on it the other weekend, thx for the motivation to keep on my rust repair journey 😅
Jimmy oakes was just talking about throwing his car on one of these with spoon... and bam here you are.. doimg while others are talking... get it brotha
All the serious business right here 🙌
Starts like a glove.
Nightride will be proud haha cheers from Poland brooo
Dude I can literally feel your excitement and enthusiasm in every vlog and this one is no difference!!! Keep it up Grant love watching you crush it!!
Grant lad don't sweat it, we're gonna have you at 200k by the time this things on a racetrack!
I can't wait to see the out come off this car amazing so fair
Granto san coming with the fire content lets go baby ! So sick you and jimmy are building pro cars at the same time i jump back and forth between channels i cant wait to see when its finished cause i know its gonna be so sick lets go baby ! and as always keep up the great work 👍
I can’t wait to find out where you’re competing at this upcoming season
News skillz leveled up there Grant! Keep up the good work. Curious though since I saw the attic...since you are using it for storage and now the airlines, would it be worth insulating the ceiling itself with sprayfoam and removing it under the floor so the heat can rise to those 2x8s? I guess the challenge is the vapour barrier that is probably already installed at the garage ceiling.
The fact that that Old ass car starts better than some new cars 😂😂😂😂
So excited to see this transformation. Love the energy you bring and always wanted to see more of you in Adam and Jimmy’s channels.
Us pre 100k subscribers are the ones that were waiting years for you to finally make one 😂😂
Sick.
Can’t wait to see this smacking jimmys doors
Another Best Vlogs ever 👌
Love these vlogs brother!!!
Love it! Good content
Fuck yeah baby! That would be so sick!
I think that Steve Darnell has some tips and pointers on his channel? He is damn fine sticking metal together and it looking pretty freaking sweet!!!! But
Love the videos Grant keep it up🤙
MENGA MINT!!!
If the center of gravity is right the car should spin easily and you can prop it up with a long lump of timber under the chassis rail to the floor 👌🤙
Grant, the biggest welding tip I can give…. Is grab scrap and put some filler in. Practice practice practice. You can read all the books, watch all the videos…. But welding is an experience and learning settings game.
If there is slag, you drag. If you use shielding gas, you push the bead
Id give you a ten because your doing it yourself and learning another skill instead of having a shop do it like most people do so you get extra points for that lets go baby !
Man you already need a bigger shop.
Score. A 8 Bec it's way better then me because I use a old school welder and I don't know shit. So good job idol. Your the man. Keep up the good work. 😁😁😁
How to learn how to weld: lots of time in practice and a good teacher. That's my way of learning. If you could watch a few videos and practice a lot, that could work.
Having a band saw to cut open your welds, to see if you have the correct generation also helps. Like I said lot of time and practice will make you good enough. Each type of welding has its own time in practice though. Mig is easy, used to weld kawasaki quad and mule frames. Easy thin material. Then I was a fabricator, installing truck boxes on digger derricks and bucket trucks. Thicker material. Never needed a cert either, but I I was also a welp instructor after sand blasting and powder coating. Also, some robot welding, had to learn some easy cad systems.
Keep it up man !
A car on a rotisserie, now we're cooking! Years ago we build/repurposed a rotisserie for a (eventually failed) car project, originally used at a train factory for servicing the giant diesel engines... it weigh a ton, literally 😅
Grant keep it up man!!!
Its always raining here too 🤦♂️🇮🇪
Grant’s excitement and enthusiasm is infectious, such a great dude!
Heeeeeeeeeeeck yeah
yer gonna Accid Dip this thing and MAYBE, KTL dipping after
That's one way of finding that 10mm socket
Love your channel Grant!! Hope to see you at Gingerman/gridlife this year!!
Clean off the black paint another inch or so back and then what you should have done is run a 45 degree bevel all the way around so that you can more easily penetrate the base metal as well as the receiver. Just think of doing whatever you can to get the metal up to molten temp and all the way through. Beveling it allows the puddle to get in further more easily and part of that is the thinnest metal is hotter because it’s the thinnest part of the joint.
Hope this helps brother! Follow back
You’re a straight grinder Grant, good shit mate!
Notification squad Have a nice weekend!🔥🔥🔥
Put a seat some straps you got yourself your very own carnival ride
You're killing it grant, I'm sad I didn't get to meet you at the lz world tour in Canada. But love all the content keep it up 🎉🎉🎉🎉
As said below adjust the center a bit and you'll spin it with one arm
Another tip, remove any loose panels before turning the car over ( have had bonnet and wings fall off before, not fun )
🔥🔥Notification squad 🔥🔥
Always wanted to do this for a pro level car. So sick!!
Im betting him and jimmy are getting their pro chassis powder coated, jimmy was saying hes going to strip his car to just the metal of the chassis on a rotisserie too. Would be absolutely sick if thats the case. Regardless, the cars are going to turn out rad.
I would up the heat on your welder. Looks either too cold or too much wire. The box section is thick so if you are worried it would be too hot that would take most of the heat.
LET'S GO BABY!!
You know grant is hype when he starts singing creed songs 😂😂😂😂
hahahahahah
Awesome video.
good videos groot keep it up
Loving the content grant! If you ever come down to south texas I’d like to get together to drift and make some content man!
What a ghee up,good effort man,mint vibes
Get this mans to 100k he defiantly deserves it
Whole chassis getting powder coated?
Your welding skills are better than mine so i cant criticise you.
super sick
keep it up brother
Just subbed today grant have a good day homie
Your energy is simple unstoppable :D :D i love your journey . keep smile !! :)
Grant that's bad ass man
What diameter wire are you using and what machine
More e46 content! It’s an s54 turbo
10 Considering most people can't put down Welds on the first try like that.🤟
Stoked to see this on the door of Jimmys new build this summer
I think the welding is better than mine, looks pretty good to me. Thanks for the content. Cheers.
i would have added triangle braces on it. so it would be more stronger under weight
grant! love the vids. it might be time for a better audio setup. dji lavalier, rode mic, taskan lav. anything to rid yourself of that shop echo .
Grant is innovative
Level that sander! 😂
Start the fire boys, rotisserie e46 for dinner
The creed refrence had me rolling 🤣🤣🤣
11:53 the pure joy of it working
10 all day 🎉
Powdercoat time Baaabbyyyy
Stop it, i crashed and used the same vn bumper, wish i had a new one at the time