Front Brake Service & Slider Pin Replacement - Ford Fiesta 2011 rattling noise over bumps cured

Front Brake Service & Slider Pin Replacement - Ford Fiesta 2011 rattling noise over bumps cured:-
In this video I disassembled both of the front brake calipers and gave every working component a good clean up and installed some new slider pins in both of the front caliper carriers. I reassembled the braking components with fresh brake grease applied to the correct places. The car was rattling while crossing speed bumps and potholes etc. I was able conduct a stationary driveway test for this in the video by simulating random road conditions.
Ford Fiesta Battery replacement:-
Tools list:- • Ford Fiesta Mk7 1.25 B...
Flat medium file, 12mm spanner, 15mm socket,19 mm socket, breaker bar, 15mm spanner ,wire brush, flat blade large and medium screwdrivers, twisted knot wire wheel, angle grinder, safety glasses.
Good luck with your DIY car repairs.
Thanks for watching.
Please Like & Subscribe for more:-
Timestamps:-
0:17 Wheel removal
03:18 Brake caliper removal
05:00 Brake pad removal
05:30 Brake carrier removal
08:07 Cleaning slider / guide pin holes
08:35 Cleaning brake pads
09:40 Brake carrier rust removal to prevent imbalance
10:16 New slider /pin fitting
14:42 Cleaning surface rust from brake piston
16:00 Brake carrier refit
18:10 Brake pad reinstall
20:24 Brake caliper refit
22:28 Wheel refitting
23:05 Brake visual inspection tips
23:45 Road noise diagnosis and explanation
#BrakeService #SliderPin #TheRepairer

[@Jeff-fx7bh]

Thanks mate, broke the bolt going into the slider pin.
Really helped replace the slider pins, good step by step

[@thejoshleft]

Great video, just ordered a brand new slide bracket from autodoc and the slide pins were stiff to the point were they’d stay all the way pushed in and would only return by manually pulling them. I’m gonna send it back and do the same as what you’ve done in this video, i bought some drill brush attachments for internal parts so hopefully that’ll get rid of the corrosion in the slide bracket

[@raider32]

Nice video, hopefully helps me identify the rattle on rough roads on my 2015 Focus ST which I thought sounded like a heat shield,
Can usually only hear it with window down and radio off, then I thought it could be the o/s front drop link, I looked and all was ok,
Gonna get wheel off and rubber mallet it, if confirmed it's going to garage for a service, new discs too they are pretty scored.

[@TheRepairer]

Thanks, brake pads can rattle in the calliper bracket on any vehicle, a quick test is to drive over a speed hump etc with the brake pedal slightly depressed and see if all is quiet!

[@raider32]

@@TheRepairer Yeh thanks, after failing to find fault on drop link and shifting focus to callipers, I've spent this week trying to break on rough patches when I hear it,
Pretty sure it does get quite with breaking (limited testing in traffic) so it could be just the pads fingers crossed.

[@jw-gr8oj]

where are you jacking the car up from? thanks

[@TheRepairer]

I’ve had a look at the video and I’m reasonably sure I’ve jacked the car up centrally under the front subframe in order to lift both front wheels simultaneously. Regards

[@johno7808]

👍

[@MultiKat33]

🚗

[@sqwidink1]

Jack stand's

[@TheRepairer]

I only use them if I’m placing myself underneath the vehicle.