WHILL Model Ci: Configuring

Hi, I’m here to show you how the WHILL Model Ci can be configured perfectly to fit your body type.
The seat height can be adjusted to 5 different settings.
First, remove the seat assembly. Then using a 8mm hex key, remove the seat post bolt.
Move the seat post up or down and align with one of the 5 settings that best fits your needs. Insert the bolt that was removed and tighten.
Next, install and secure the seat assembly on the seat post.
To adjust the arm length, first remove the arm cover. To remove, grasp the right and left edges, gently bend outwards and pull towards you.
Locate the arm adjustment tab on the bottom of the exposed arm.
While pulling on the arm adjustment tab, slide the arm up or down to the desired length. The arm length can be set in 4 settings.
Install the arm cover by positioning the tabs on the top end and pressing the arm cover into place.
To change the back support cushion height, start by detaching the cushion from the velcro adhering it to the shell
Using a 4mm hex key lightly loosen the 4 screws.
Once loosened, slide the back-support up or down until you reach the desired height, then secure by tightening the screws.
Return the back cushion to its original position.
The back support angle can be quickly adjusted to 90, 95 and 100 degrees.
To change the back support angle, first locate the two adjustment pins located under the back support and just behind the seat cushion.Tilt the back support slightly forward to release pressure on the adjustment pins..
Next, from the bottom, push the adjustment pin up while turning it to the desired angle. Make sure both the left and right pins are at the same angle.
For more information, please refer to the Model Ci user manual or give us a call.
Visit www.whill.us or call [phone].
The WHILL Model Ci is not considered to be a medical device and has not been submitted to the Food and Drug Administration for review or clearance.

[@kendrawoollard9095]

I NEED THIS

[@alanduboyce5779]

I can not wait to get My WHILL Ci!!!

[@PoppingWheelies]

The video is good, thank you. It is much better than the user manual. However, my chair does not have the blue tab to adjust the arm. It has a metal ring that is fastened with cotter pins.

[@WHILLUS]

Hi George,
Depending on when your WHILL CI was originally made it may or may not have the blue tab. We make small changes like that along the way as customer feedback comes in.

[@chamarystigers8731]

I have one too kind power wheelchair easy for me

[@mikeandhols]

Sure wish it was made for taller people! *I already asked customer support if chair will work for a 6 ft person and they said no 😪

[@WHILLUS]

Hi Helena,
The Model Ci can actually accommodate individuals up to at least 6'2", depending on where their height is (e.g. torso, thighs, or lower legs). Matt on our sales team is 6'4" and he feels comfortable in the Model Ci. Of course, everyones comfort and needs are different, so please give us a call at 844-699-4455 ext. 1 or email us at [e-mail] and we can discuss the details and specs of the Model Ci in more detail to ensure it could be a great fit for you. Thanks!

[@almadeluz8964]

how much does it cost ?

[@kendrawoollard9095]

Yes How Much

[@sbgirl4371]

Can I order the hot guy along with the chair?

[@chamarystigers8731]

Hi my right ankle bad doctor cutting my part bone removed doctor talk me stay uesd power wheelchair on my life time

[@WHILLUS]

Hi Charmary, Sorry to hear about your ankle. If you'd like to test drive or place an order for a WHILL Model Ci, please drop us an email at [e-mail] and our WHILL Specialists will be happy to help! :)