Have to agree. My g&p stoner 63 was a nightmare to get working. Aoe was screwed out of the box, it kept jamming and eating pistons and the air seal was horrible. Aoe just needed a new cylinder head but the hop unit is screwed and i have to use 80 degree rubbers so it doesn't jam. A perun nozz-x fixed the airseal somewhat. Had some rockset to make sure it doesn't move. Ever. Added some short stroking, a warfet and a warhead motor. About 30k bbs through it now, its been 100%. Even played a winter game in -14c temps last weekend. Still 100%. Way too expensive. But i needed a stoner 63.
I feel your pain man. My Stoner also had air seal issues and the piston didn't want to sit right in the gb. The main issue for the air seal were the gears (replaced them with standard Cyma gears with NO GEAR DELAYER). The other problem was the inner barrel retaining clip - it didn't do it's job wel and the barrel moved back and forwards. But it's a badass replica!
@@iamzeusv2 yes, I'm using a aftermarket inner barrel (Deepfire) and Maple leaf Monster hop rubber. I have no problemes with feeding and the barrel is stable in hop unit (used some teflon tape to secure it)
Would actually be very good for cyma to do a L1A1 SLR with a sr25 gearbox to dominante ares one and force them to shut down. Ares needs to go into administration big time as all there doing is given us shite and then making sure we can't upgrade it nor modify to put better parts in it
@user-qi8gu8rj6e jg may be good but atm cyma platinum is kinda dominating but having a L1A1 SLR with a sr25 gearbox would better then a version 3 as it has the long ass cylinder. Atm cyma is making quite Few different aegs and there making there own first full auto aeg aa12 or aa2 shotgun I can't remember what it's called but anyway cyma is expanding alot into aegs, snipers and etcand I would love to see them make a aeg with Blowback, bullpups and sig mcx and the mpx.
@@johnroche8373 yeah the term assault rifle was a bit of a yanky term but it was a multi role service rifle. And well the father inlaw assaulted Argy positions during the falklands with one, he did not just to sit back and pop at them lol it was used in urban areas of northern Ireland in the 70's too to the jungles of Belize The L1a1 was designed for all types of fighting and also was used as a sharpshooters rifle.
Hello! Really great and informative video as always! Could you please tell what trigger board is it of Perun? Couldn;t find one! Maybe it becomes with ETU++? Thanks in advance!
I cannot as they are not for general sale & to my knowledge, I purchased the vast majority of them. They're very particular about how they work & one mistake & it's insta death.
hey, was just wondering what exactly happened to that hopup? did the bucking burst a hole in iteslf and destroy the hop up? I'm getting one of these soon as its literally the only gun on the market that will fit my kit, and I'd like to avoid what this gun did if at all possible.
@NegativeAirsoftTech tell me about it, is there a trick to keep it all together while replacing the shells? Might try some grease? Stop it all jumping out.
What mosfet is that one? Been searching Perun and google for it. Saw you throw one in an SVD and i'm hoping I can you one in my SVU and i dont have to HPA it. Really don't want to HPA it but the gun is going to eat itself if i dont get it running perfectly.
Wire management is hard... Like i once tried to have a bigger battery on my tm mp5k, it stuck, and i couldnt get it out without disassembling. Having handled some obscure (real) guns with ease, i wasnt having an easy time with that. Also fuck loctite, my friend wanted to change the hop rubber on his cyma m4a1, and all the screws where glued in, at that point he can burn every plastic bit or leave it
I've got 2 of these, one the gear box in peice as I lost patience trying to get it back together, this after a local shop had rebuilt it and it striped the sector gear. The second one intermittent full autos on semi. Do you fancy doing this to both of them. I love and hate them in equal measure, but one an aussie bitch gun and it just looks so fucking cool I don't want to sell it.
I always have a whale of a time Can confirm v3 hybrid works in microswitch gearboxes but yeahhh definitely only do that to your own gearbox lol, lots of dremel work very close to tappet guide etc., not worth it lol especially now that those other Peruns are available
It's unfortunate such a beautiful gun comes out of the box garbage. Wish there was a company who made high quality OG FALs and the SA-58s. Would be nice to get parts for my Echo 1 SA-58. but fuck me in the ass for liking the FAL!
Another unicorn gearbox? Nope. Ill prefer classic army version. Good old vanilla V3 all the way
Рік тому
Of all the things Arcturus could have copied from the airsoft world to put in their PP-19-01s, they chose to copy the stupid side mounted micro switch vs ramp thingamabob. Great.
Get yourself an impact driver, takes different screwdriver bits, you whack it with a hammer and it scares the shit out of the screw and the screw let’s go because of fear!
Have to agree. My g&p stoner 63 was a nightmare to get working. Aoe was screwed out of the box, it kept jamming and eating pistons and the air seal was horrible. Aoe just needed a new cylinder head but the hop unit is screwed and i have to use 80 degree rubbers so it doesn't jam. A perun nozz-x fixed the airseal somewhat. Had some rockset to make sure it doesn't move. Ever. Added some short stroking, a warfet and a warhead motor. About 30k bbs through it now, its been 100%. Even played a winter game in -14c temps last weekend. Still 100%. Way too expensive. But i needed a stoner 63.
I feel your pain man. My Stoner also had air seal issues and the piston didn't want to sit right in the gb. The main issue for the air seal were the gears (replaced them with standard Cyma gears with NO GEAR DELAYER). The other problem was the inner barrel retaining clip - it didn't do it's job wel and the barrel moved back and forwards. But it's a badass replica!
@@AirsoftTipsandReviews Is it an aftermarket barrel? The hop unit can only use the stock one. Notches dont line up.
@@iamzeusv2 yes, I'm using a aftermarket inner barrel (Deepfire) and Maple leaf Monster hop rubber. I have no problemes with feeding and the barrel is stable in hop unit (used some teflon tape to secure it)
“Even they can become stuck in their little box” tell me that wasn’t a pun
I have to say you open and honest way of presenting your videos. Is great spot on bud. Plus L1A1 is my favourite weapon. Keep up the quality work . 👌
I always enjoy these long videos. It is fun to watch and learn from.
Your work always seems magical to me
Would actually be very good for cyma to do a L1A1 SLR with a sr25 gearbox to dominante ares one and force them to shut down.
Ares needs to go into administration big time as all there doing is given us shite and then making sure we can't upgrade it nor modify to put better parts in it
Of JG put out a better quantity and more variety because I sure as shot can't find a JG FAL
@user-qi8gu8rj6e jg may be good but atm cyma platinum is kinda dominating but having a L1A1 SLR with a sr25 gearbox would better then a version 3 as it has the long ass cylinder.
Atm cyma is making quite Few different aegs and there making there own first full auto aeg aa12 or aa2 shotgun I can't remember what it's called but anyway cyma is expanding alot into aegs, snipers and etcand I would love to see them make a aeg with Blowback, bullpups and sig mcx and the mpx.
@@turogamer-oi4nq JG FALs are available if you look hard enough
Cyma needs to make a good AS VAL to curbstomp LCT too
Tip...hold a soldering iron on the screw !!
Yeah, that helps when a small, damaged screw is in almost sideways.
I have one of these used it about 5 times before It become a wall hanger.. works and sounds perfect just too long for an assault rifle lol
It's a battle rifle. For more open long range combat.👍
@@johnroche8373 yeah 100% 😆
@@johnroche8373 yeah the term assault rifle was a bit of a yanky term but it was a multi role service rifle. And well the father inlaw assaulted Argy positions during the falklands with one, he did not just to sit back and pop at them lol it was used in urban areas of northern Ireland in the 70's too to the jungles of Belize
The L1a1 was designed for all types of fighting and also was used as a sharpshooters rifle.
Hello! Really great and informative video as always! Could you please tell what trigger board is it of Perun? Couldn;t find one! Maybe it becomes with ETU++? Thanks in advance!
I cannot as they are not for general sale & to my knowledge, I purchased the vast majority of them.
They're very particular about how they work & one mistake & it's insta death.
You loved working on mine!! You’re welcome. 😊
hey, was just wondering what exactly happened to that hopup? did the bucking burst a hole in iteslf and destroy the hop up? I'm getting one of these soon as its literally the only gun on the market that will fit my kit, and I'd like to avoid what this gun did if at all possible.
It was a year ago bud, dunno.
Don't get one, they're shit
@@NegativeAirsoftTech lol, too late. imma just put a polarstar in it when it breaks. Its quite literally the only shell that works for my kit.
Fuck that doom music brings back memories lol
Would a tm v2 gearbox fit in the Ares L1a1
Nope, it's a V3 sort of but not quite.
What mosfet should I use for my ares l1a1 slr I'm looking but I'm not sure what would work
Tokyo Marui MWS or NGRS DMRs? Are they the ones ur referencing lol
What trigger switch have you put it in there as I can’t find it ? Thanks
...and you won't. For only I have them.
Top vid mate, keep up the great work 👍
I'm having difficulty reassembling trigger mechanism on my ares l1a1 Do you have a tutorial on it. Cheers.
It's a pain in the arse
@NegativeAirsoftTech tell me about it, is there a trick to keep it all together while replacing the shells? Might try some grease? Stop it all jumping out.
@@nickelder3705 negativeairsoft.com/product/gearbox-clips-x2/
Short (little)cable ties worked for me.
We want king arms
We want chilly willy!
"Exactly why this one doesn't work"...
Keep on being you Luke. Also, when are the Perun clicky triggers hitting us?
Not just yet
@@NegativeAirsoftTech Ok, I'll get the mouthwash ready for later in the year
You make it look so so easy but it's a Great talent to have I now know who to repair my guns now
What mosfet is that one? Been searching Perun and google for it. Saw you throw one in an SVD and i'm hoping I can you one in my SVU and i dont have to HPA it. Really don't want to HPA it but the gun is going to eat itself if i dont get it running perfectly.
I know right! Only I have them.... HAHAHAHAHAHAHA!!!!!! There are other units but they're inferior... INFERIOR!! HAHAHAHAHAHA!
@@NegativeAirsoftTech god damnit, how'd i that know was going to be the case. Guess i'll just HPA the bitch then, lol.
Wire management is hard... Like i once tried to have a bigger battery on my tm mp5k, it stuck, and i couldnt get it out without disassembling. Having handled some obscure (real) guns with ease, i wasnt having an easy time with that.
Also fuck loctite, my friend wanted to change the hop rubber on his cyma m4a1, and all the screws where glued in, at that point he can burn every plastic bit or leave it
I've got 2 of these, one the gear box in peice as I lost patience trying to get it back together, this after a local shop had rebuilt it and it striped the sector gear. The second one intermittent full autos on semi. Do you fancy doing this to both of them. I love and hate them in equal measure, but one an aussie bitch gun and it just looks so fucking cool I don't want to sell it.
I love Ares
Liar
@@planetcaravan2925 😯
Still the worst AEG I've had the displeasure of working on, that trigger assembly is cursed
Had my kingarms para version or r2 as we knew it in the army for 6 years now Opened it once and I will never ever do it again what a fucking nightmare
*insert doom 95 music here* 6:13
6:13 Hope Metallica does not copyright strike you for this
Sounded like doom on the snes
@@panel290980 It was both matalicca & Durm!
I always have a whale of a time
Can confirm v3 hybrid works in microswitch gearboxes but yeahhh definitely only do that to your own gearbox lol, lots of dremel work very close to tappet guide etc., not worth it lol especially now that those other Peruns are available
Laughs as only I have have them
@@NegativeAirsoftTech ahh fuggg…. *now that those other peruns are available to be put in your rif by the man himself (if you’re in the UK)
Which do you hate more. Ares or vfc.
Ares - VFC take normal parts.
I just want to do a spring change. Any way of achieving this without me having a rage induced aneurysm?
It's unfortunate such a beautiful gun comes out of the box garbage. Wish there was a company who made high quality OG FALs and the SA-58s. Would be nice to get parts for my Echo 1 SA-58. but fuck me in the ass for liking the FAL!
The echo 1 is a copy of a classic army sa58. Most parts and mags should work with it i think. My jg is the same.
lct mp5????
Soon
News from 5 years back
Ares: nah mate, f you :-)
you must be Kratos since you hate Ares. but anyways crazy shit you have to deal with on this tech job
Another unicorn gearbox? Nope. Ill prefer classic army version. Good old vanilla V3 all the way
Of all the things Arcturus could have copied from the airsoft world to put in their PP-19-01s, they chose to copy the stupid side mounted micro switch vs ramp thingamabob. Great.
I take take it you don’t like ares?…..😂
What gave yoyu that idea? From all of my vids discussing the fact, which part of this one, tipped you off?
Impact screwdriver dingbat 🤣😂🤣😂🤣
I see you've mastered 1880's slang.
Well done
@@NegativeAirsoftTech thank you sir 🤘
That's why I don't buy ares lol.
Bum Sausage
Some like it weird.
Eggs.
Bum sausage.
dont know why i just got feeling u not biggest Ares fan Luke :)
Doomguy
Get yourself an impact driver, takes different screwdriver bits, you whack it with a hammer and it scares the shit out of the screw and the screw let’s go because of fear!
I hate Ares.