CZ P10F Tear down and compensator questions answered!!!
Вставка
- Опубліковано 22 тра 2021
- CZ P10F Tear down, rebuild, and some issues with the Compensator when cleaning gets involved!! Learn how to clean and oil this weapon even without taking your compensator/muzzle break off. Or just stop by for the basics of how to field strip, and put back together this amazing weapon.
- Спорт
Great video, easy instructions Jeff !! Greatly appreciated, thank you.
Thanks for the positive feedback and support!
Outssstanding!!! Very much appreciated.
Hey thank you very much for the appreciation!! Hope to see you around here more on the channel!
Egw dovetail plate works really well for rmr. Ragnarok holster with tlr7 A does work a little heat .
Jeff, how do you know if or when you need a different spring? Also, do the springs have any effect on recoil management? Love the videos!!
P.s. do you recommend a compensator for shooting?
Thanks for the question! It won't effect the recoil at all, but after adding a silencer depending on the quality and effectiveness it MAY reduce the action on the slide, which may require a lighter spring to help assist in the chambering for the next round. My point in the video was, if you notice an issue with jams or slide action, try a different spring! Thanks for the support!
Hey Jeff! I love your videos! Very very informative! 1-10 what gun do you recommend for a conceal carry?! Thanks!
That depends on what you want to get out of it. Do you want to carry in your favorite pair of shorts? Or wear a zip up whenever you go out? Check out my other video that compares the best weapon to conceal and thanks for the support!
do i need a custom barrel in order to attach the comp. ? Or will it fit on the P07 SR stock barrel that is made for silencer
Hey, good information. Quick question. Why do you need to add loctite at all? Can't you just screw the compensator on tight and keep an eye on it to make sure it doesn't loosen up? Thanks!
Also, are you planning on any AR-15 or rifle vids? Maybe some tips on building kits for beginners?
Thanks for the comment! AR videos are coming into rotation soon! The locktite is needed to hold it into place. If it isn't used, the compensator can/will unscrew from the shock and recoil of the gun. This just holds everything where it is supposed to be. Thanks for the support!
Does your comp have a tiny back and forth play even when fully screwed down. Thank in advance
How do you take apart the mag i think I accidentally stuffed an extra round in and I guess the spring popped
There should be a 'button' on the bottom of the mag that you depress with some force and the very bottom of the mag slides off of the mag itself
Also, are there different style lowers for the trigger assembly?
Lowers? No. But trigger assemblies yes! Check out Apex if you need a new, lighter trigger. I promise you won't be disappointed!
I just bought one of these, and my muzzle brake only needs a crush washer to keep it on snugly; IOW, not one drop of glue!
Those crush washers are fantastic!
Have you shot it with a can yet? Any reliability issues while shooting it suppressed?
I have not shot it with a suppressor yet. I'll update the video once I do!
How do we get the threaded barrel?
I have the same gun but mine is normal do you recommend purchasing it somewhere?
This one was bought with the threaded barrel. Its a very particular item to have for your gun and depends on the route you want to take with it. If you want to add a Compensator or a Muzzle Break or, even better, a silencer (which requires a lot of wait time and background checks) then ofcourse! you can buy an aftermarket one for just a few hundred dollars. If you're just looking to shoot at the range or have it for protection then I don't really see the need in one.
I will say, with the compensator I put on this gun I don't see much of a performance difference. With that said, there are hundreds of different types of them and I'm sure there are better ones than the one I bought.
I know I went around in a circle but I hope I helped a little bit! Thanks for your question! Make sure you're subscribed for more!
@@jeffofalltrades8489 absolutely helped
You really shouldn't need to use Loctite on ANY muzzle brake or suppressor. All what you have to do is use the jam nut that should come with any device like that when you buy it to add to your pistol. It may even come with a crush washer, but using that is totally up to you.
Just following the instructions from the manufacturer!
What comp is that??
Primary Machine CZ Stealth Compensator for the P10
Dude shooting it will heat up the barrel duh
I have no clue what you're referencing....
@@jeffofalltrades8489 I'm assuming he means shooting it will heat up the barrel and allow the loctite to break free or something?