Hey Emgo, you are one of the first youtubers I’ve ever watched and I’ve been watching since I was 10 and now as an 18 year old adult I still like to watch your vids! Keep up the good work
So his beast mode is a cross between a shark and a velociraptor and in robot mode he has Wolverine claws? This has to be one of the coolest Transformers ever!
>_> I was on the fence about Abominus but definitely wanted Rippersnapper since he was a favorite as a kid but then I had to go and read Monstrosity again. Must.Get.All.Five.
All this guy is missing is ankle pivot. Plus his lines in alt mode are gorgeous. I was never a Terrorcon fan, but I'm absolutely picking Rippersnapper up.
@@moonwhooper I realised that a long time ago when they where first revealed. At first when all we knew was "the terracons are the films villains" I assumed it to be the 5 that form abominus but as I said, once the character reveals got released I knew they where a new subset. Did you wait to see the movie before coming to this realisation?
I picked this guy up as well and I gotta say I don't have the same issue with the Prime armor not holding the gun/cover part properly. Also the leg mode on this thing is easily my favorite leg mode for any combiner wars or potp figure. It's going to be hard to choose which limb he's going to be when I get the whole team.
Yeah, a CW or PotP figure with an unusable combiner port kinda wrecks its whole reason for existing, so the issue with the gun/cover falling out is a minor one. When he goes into combined mode he can use that piece for a heel or maybe just cram the Enigma or a Prime master in it. So it's a minor QC problem compared to what some other copies have.
They're not even trying with the bios anymore. As a kid I used to use the bios of Transformers and GI Joe toys to help decide which character to get next. I really miss those.
Is there any way to store the combiner hand on him in robot mode that doesn't look silly? Like maybe on his back? I just got him and I love him, But I don't see any way to do this like I did with Jazz, Swoop, and Slug, and it's beginning to piss me off.
I picked up a Deluxe Rippernsapper from my local Wal-Mart the other day and him and Slag are by far my favorite Deluxes in Combiner Wars/PotP, also mine's Prime Armor holds its little gun in perfectly fine, maybe yours has a deformed handle thats a bit shorter?
I used to have the g1 version of this toy so I'll definitely be getting him. those claws in robot mode bug a little though. can thy not be rotated or folded into his arms?
I have a question on this one: Transforming from robot to "monster" mode, the main part of the tail doesn't want to tightly close all the way (where you shift the blue part of the legs into the grey part and then close them. There are some tabs which don't clutch into the opposing section. It's frustrating because it work fine when putting into robot mode. It's like the blue part of the legs are blocking something but can't tell what. Anyone else have an issue like this? I don't think we're following the instructions wrong either, but it's possible.
That guy looks really cool, but for about the same price of POTP rippersnapper I could get new stickers and a replacement gun for my beloved G1 rippersnapper. Edit: I got this guy as a Christmas gift and he’s great! I really like how the Prime Armor integrates into the monster mode.
am i the only one that realizes that the shoulders r on a double hinges... that actually separate from the body n move n2 a different position just like the shoulder placement on Hasbro legends class " gnaw " ( sharkticon ) ????
Ok now Rippersnapper is clearly a sharkticon. G1 version I can understand the confusion, but PotP is clearly a shark. Decepticon Shark-bot = Sharkticon.
RG1Studios Based on what other people have said it is an issue of "your mileage may vary". This is the 2nd review, out of the 3 I've seen, with the same issue, so I'd say that it may be common. Hasbro may fix it with later releases.
Anyone know that blue panel in the shoulders can be remove and when you swap it upside down, It would be more sense the look more like dinosaur posture ? Anyone? No one?
Endergamez it absolutely is. The combine mode is very impressive for a legends class combiner. Well worth your money. As soon as they're available in my area, I'm grabbing both.
Whats the bionicle's name i see it in like every video ive seen on this channel. Im a new viewer so i dont know if im missing something that everyone else knows
I've definitely noticed that PotP has bad QA problems. I really want to love this figure line, but man there are issues. Poor paint apps (random globs of paint spattered on figures), poor sticker quality and placement (my Starscream had two stickers lying in the packaging and not even stuck on the figure), and HUGE issues with friction connections not working properly. I currently have Grimlock, Starscream, Slash, and Windcharger in this series and every single one of them have multiple issues with some friction tab and friction port connections not working like they should. Hasbro really needs to step up the quality control. They also need to do something about price gouging, but that's another comment for another day.
I've only had one big problem so far and that was with Leader class Rodimus. When you transform him into his vehicle mode with the trailer there's those pipes that are supposed to come down and lock into place. One of the pipes on my copy wasn't able to move at all and it ended up tearing off completely. Luckily I was able to replace it.
It's because of the budget that they have. They spend all of their money on other Hasbro products like Star Wars, Nerf, Barbie, Monopoly, other Hasbro board games, etc.
Found the fix. All limb bots have pegs that stick out the back of the knees. When you close RS's legs in monster mode this peg goes into a U shaped notch on the inside of the leg,down at the bottom of the leg. This notch is too shallow. Remove the leg from the body,and then remove the outer leg also. This is the safest way to work on it. With a brand new x-acto blade in your handle, shave very small amounts out until you reach the desired depth.Use the point of the blade,and be careful. Keep taking out material until the leg closes entirely.Shave out material,close the leg,if it does not close completely,repeat.This fix worked on my copy of RS,his legs now close completely.Then simply reattach the leg to the hip,and reattach his outer standing leg. Again this worked for my copy of RS,as I hope it will for others having this leg closure problem. And for crying out loud,BE CAREFUL!!! Happy fixing! Prof Victor Von Bong
Found the fix. All limb bots have pegs that stick out the back of the knees. When you close RS's legs in monster mode this peg goes into a U shaped notch on the inside of the leg,down at the bottom of the leg. This notch is too shallow. Remove the leg from the body,and then remove the outer leg also. This is the safest way to work on it. With a brand new x-acto blade in your handle, shave very small amounts out until you reach the desired depth.Use the point of the blade,and be careful. Keep taking out material until the leg closes entirely.Shave out material,close the leg,if it does not close completely,repeat.This fix worked on my copy of RS,his legs now close completely.Then simply reattach the leg to the hip,and reattach his outer standing leg. Again this worked for my copy of RS,as I hope it will for others having this leg closure problem. And for crying out loud,BE CAREFUL!!! Happy fixing! Prof Victor Von Bong
Hey Emgo, you are one of the first youtubers I’ve ever watched and I’ve been watching since I was 10 and now as an 18 year old adult I still like to watch your vids! Keep up the good work
Megatron slowly slipping into Galvatron-esque insanity.
I love how his bot-face seems to have a disapproving thug-scoff look to the mouth. A sort of "Seriously? You wanna dance?" look.
I'm so looking forward to getting this guy! I just wish I could find one in my area. Freaking scalpers, man...
So his beast mode is a cross between a shark and a velociraptor and in robot mode he has Wolverine claws? This has to be one of the coolest Transformers ever!
He may or may not have gotten lost towards a metal band convention.
>_> I was on the fence about Abominus but definitely wanted Rippersnapper since he was a favorite as a kid but then I had to go and read Monstrosity again. Must.Get.All.Five.
Shade you mean hun gurrr not abominus
All this guy is missing is ankle pivot. Plus his lines in alt mode are gorgeous. I was never a Terrorcon fan, but I'm absolutely picking Rippersnapper up.
They are the main villains in new movie lol
@@shaunhandley3050only in name
@@moonwhooper I realised that a long time ago when they where first revealed. At first when all we knew was "the terracons are the films villains" I assumed it to be the 5 that form abominus but as I said, once the character reveals got released I knew they where a new subset.
Did you wait to see the movie before coming to this realisation?
Always been one of my favorite Terrorcons. A very well done modernization for current toys.
All he needs is a SHNK for those claws.
i was always a sucker for the terrorcons and sea-monsters particularly , so ripper snapper was always one of my vintage combiner favorites
Honestly, out of all the combiners released, Abominus can definitely pull off having two thumbs considering his whole theme is "monsters"
I am looking forward when the complete Abominus come out
Emgo's reaction to the combiner thumb thing is the same as my reaction to his prime armor piece falling out. I KNOWWWW. Lol.
I love how that the shark head reminds me of the nose of the Battlestar Galactica.
He CAN do both Mascot
I Like This Video
Willyboi!! Rippersnapper can do anything he sets his brain module to. Whether it’s ripping... or snapping!
Glad I picked him last week💖 now to find the Gurr of Hun
God i can't wait to get a hold of these, abominus is my favorite scramble-city combiner
I take it that transforming Galvatron back into Megatron didn't go as well as the Decepticons had hoped
I’m excited to see you review BattleTrap. I hope you do soon.
Guy: get outta here ya whippersnapper
Rippersnapper: its RIPPERSNAPPER!
now that i have a cat i can't believe how much white hair appears on my figures now lol
He deserves so many more likes
hah hah great wolverine pose at the end there
I like that he was packaged with two guns (not including the Prime Armor) which is rare for a deluxe in this line like Darkwing (Blackwing).
I picked this guy up as well and I gotta say I don't have the same issue with the Prime armor not holding the gun/cover part properly. Also the leg mode on this thing is easily my favorite leg mode for any combiner wars or potp figure. It's going to be hard to choose which limb he's going to be when I get the whole team.
Yeah, a CW or PotP figure with an unusable combiner port kinda wrecks its whole reason for existing, so the issue with the gun/cover falling out is a minor one. When he goes into combined mode he can use that piece for a heel or maybe just cram the Enigma or a Prime master in it. So it's a minor QC problem compared to what some other copies have.
You sold me at his wrist articulation!
Seems like old buckethead Megs is starting to loose his grip as master planer. XD
Terrorcons were one of the only full squad I had when I was a kid... needless to say, I WILL own these updates of em.
They're not even trying with the bios anymore. As a kid I used to use the bios of Transformers and GI Joe toys to help decide which character to get next. I really miss those.
Oh Rippersnapper, do you think they’ll repaint it and call it Grimlock?
I have a few of the g1 terrorcons, but I want to get the POTP versions as well
Your Megatron acts like he's Galvatron. lol
Rippersnapper has some Wolverine actions going there with his 3 claws.
The prime armor flaw must only be individual because mine stays on just fine
Same
Just go on emgo cause that's how you do it. And honestly, I am a big fan of yours that last thing that is very much funny
It's always a heavy (heavy) remote of Alpha Bravo
Lord Megatron Remote?
.? .? .? God damn autocorrect, remold not remote.
Is it really? according to the wiki it´s an all new mold. Though it does share some similarities.
Transformania you said wiki and not Hasbro, I can't take this seriously.;)
I meant the Transformers wiki which is usually very accurate: tfwiki.net/wiki/Rippersnapper_(G1)#Generations
Is there any way to store the combiner hand on him in robot mode that doesn't look silly? Like maybe on his back? I just got him and I love him, But I don't see any way to do this like I did with Jazz, Swoop, and Slug, and it's beginning to piss me off.
as usually many respects n big uppurz to the master Jedi of origami plastic n die cast..... emgo is dat dude !!!! bows ( cyber ninja vanish )
I picked up a Deluxe Rippernsapper from my local Wal-Mart the other day and him and Slag are by far my favorite Deluxes in Combiner Wars/PotP, also mine's Prime Armor holds its little gun in perfectly fine, maybe yours has a deformed handle thats a bit shorter?
Megatron has jumped the shark...ticon...
mines got a glitch, the front and back leg pieces wont completely stick together in beast mode
Ladies and Gentlemen, the original Street Shark!!
Will you do a conga line of all your Transformers? That would be awesome!
I used to have the g1 version of this toy so I'll definitely be getting him. those claws in robot mode bug a little though. can thy not be rotated or folded into his arms?
They didn’t want to overengineer the arms, leaving less budget for the rest of the figure, all to fix something that isn’t really an issue.
The combiner plug is stiff Is there a way to fix it? Because mine is extremely stiff
Next time he looks to the right he's gonna see a pile of boxs oh and almost forgot there's also going to be a pile of card's
I have a question on this one: Transforming from robot to "monster" mode, the main part of the tail doesn't want to tightly close all the way (where you shift the blue part of the legs into the grey part and then close them. There are some tabs which don't clutch into the opposing section. It's frustrating because it work fine when putting into robot mode. It's like the blue part of the legs are blocking something but can't tell what.
Anyone else have an issue like this? I don't think we're following the instructions wrong either, but it's possible.
do you guys think this guy can be a base for custom squeezeplay?
That guy looks really cool, but for about the same price of POTP rippersnapper I could get new stickers and a replacement gun for my beloved G1 rippersnapper.
Edit: I got this guy as a Christmas gift and he’s great! I really like how the Prime Armor integrates into the monster mode.
The Sharkticons should've been this, and the Horrorcon Rippersnapper should've been what we know as a Sharkticon respectively
Sinnertwin was my most favoirite deluxe in that wave
land shark!
How do u when waves come out emgo
Is Megatron slowly going to turn into Galvatron by the end of these Terrorcon reviews? Worlds Deadliest Conga line sounds like a Galvatron plan
Something tells me I can possibly with a bit of freestyling with the transformation I could make a Metal Gear Ray
Lol, that prime fist must be a product variance. Mine doesn't have that problem...
am i the only one that realizes that the shoulders r on a double hinges... that actually separate from the body n move n2 a different position just like the shoulder placement on Hasbro legends class " gnaw " ( sharkticon ) ????
We need to find megs some pure energon so that he can regain his sanity
The loose part "gun poot" issue may just be your copy. Mine doesn't have that issue.
Emgo do you know when is the next wave coming aut
Does anybody else have a problem getting his backend staying together at the waist in beast mode?
I just want to say that I got a _transformer_ ad, you know, large industrial tech, ones that transforms ELECTRICITY, on a Transformer TOY video. LOL.
Which voyager would be better to get, grimlock or hun grr?
there also releasing inferno as a hot spot remold (its leaked )
ok listen you can rip or snap not both pick one don’t be greedy
Rippersnapper: I will rip you in half and snap you back Stronius
Volcanicus prime in the house
He is a HEAVY remold of Offroad
Ok now Rippersnapper is clearly a sharkticon. G1 version I can understand the confusion, but PotP is clearly a shark. Decepticon Shark-bot = Sharkticon.
Is the centerpiece in the prime armour issue an instance of "your mileage may vary" or is it gonna be common throughout all Rippersnappers?
I only have one copy so that is all I can comment on. I can't speak on every copy that's out there
RG1Studios Based on what other people have said it is an issue of "your mileage may vary". This is the 2nd review, out of the 3 I've seen, with the same issue, so I'd say that it may be common. Hasbro may fix it with later releases.
Anyone know that blue panel in the shoulders can be remove and when you swap it upside down,
It would be more sense the look more like dinosaur posture ? Anyone? No one?
Mister Hyena it is, it suppose to be like that,
Because those panel is not hard to remove
who is abominus and can you tell me the names of the terricons who form him
Hun-Gurr, Rippersnapper, Blot, Sinnertwin, and Cutthroat
Blot or Rippersnapper?
Found a lone rippersnapper in Walmart today and bought him
Ripper sanpper is a retool of twinferrno
Spoiler for the end segment. Megatron, I want to see that plan put into action.
hey look!
A xenom-i mean rippersnapper?
can you do battleslash and roadtrap next pls. I got BattleSlash and want to know if their combination is worth getting the other
Endergamez it absolutely is. The combine mode is very impressive for a legends class combiner. Well worth your money. As soon as they're available in my area, I'm grabbing both.
The Redeemer try toys r us. Thats where I got mine
When you have abominus complete do it's comparison with volcanicus
My prime armour for him works fone and the card says Megatronous Rippersnaper.
My prime armor cap is pretty tight.
Whats the bionicle's name i see it in like every video ive seen on this channel. Im a new viewer so i dont know if im missing something that everyone else knows
His name is Mascot.
If only his name was wippersnapper
Lol
Back in my day, we got our energon in cubes. Big purple cubes delivered by the enegon man twice a week. But back then bots knew the value of a dollar.
that one is so cool
I'm torn between this guy and Blot solely for their alt-modes
This is a heavy retool of combiner wars ironhide
I've definitely noticed that PotP has bad QA problems. I really want to love this figure line, but man there are issues. Poor paint apps (random globs of paint spattered on figures), poor sticker quality and placement (my Starscream had two stickers lying in the packaging and not even stuck on the figure), and HUGE issues with friction connections not working properly. I currently have Grimlock, Starscream, Slash, and Windcharger in this series and every single one of them have multiple issues with some friction tab and friction port connections not working like they should. Hasbro really needs to step up the quality control. They also need to do something about price gouging, but that's another comment for another day.
I've only had one big problem so far and that was with Leader class Rodimus. When you transform him into his vehicle mode with the trailer there's those pipes that are supposed to come down and lock into place. One of the pipes on my copy wasn't able to move at all and it ended up tearing off completely. Luckily I was able to replace it.
It's because of the budget that they have. They spend all of their money on other Hasbro products like Star Wars, Nerf, Barbie, Monopoly, other Hasbro board games, etc.
Mine holds on
my Swoop prime armor has the exact same problem. 😭
Is anyone having issues getting his legs to close in monster mode?
Found the fix. All limb bots have pegs that stick out the back of the knees. When you close RS's legs in monster mode this peg goes into a U shaped notch on the inside of the leg,down at the bottom of the leg. This notch is too shallow. Remove the leg from the body,and then remove the outer leg also. This is the safest way to work on it. With a brand new x-acto blade in your handle, shave very small amounts out until you reach the desired depth.Use the point of the blade,and be careful. Keep taking out material until the leg closes entirely.Shave out material,close the leg,if it does not close completely,repeat.This fix worked on my copy of RS,his legs now close completely.Then simply reattach the leg to the hip,and reattach his outer standing leg. Again this worked for my copy of RS,as I hope it will for others having this leg closure problem. And for crying out loud,BE CAREFUL!!!
Happy fixing!
Prof Victor Von Bong
he took it I saw that first at centel Walmart
I got one than two then three also four and five no i have no money but worth it
Pew pew bang bang!
You’re awesome
Anyone else having problems with the legs closing in shark mode?
Found the fix. All limb bots have pegs that stick out the back of the knees. When you close RS's legs in monster mode this peg goes into a U shaped notch on the inside of the leg,down at the bottom of the leg. This notch is too shallow. Remove the leg from the body,and then remove the outer leg also. This is the safest way to work on it. With a brand new x-acto blade in your handle, shave very small amounts out until you reach the desired depth.Use the point of the blade,and be careful. Keep taking out material until the leg closes entirely.Shave out material,close the leg,if it does not close completely,repeat.This fix worked on my copy of RS,his legs now close completely.Then simply reattach the leg to the hip,and reattach his outer standing leg. Again this worked for my copy of RS,as I hope it will for others having this leg closure problem. And for crying out loud,BE CAREFUL!!!
Happy fixing!
Prof Victor Von Bong
I see this, I see a Deluxe Repugnus.
Grimlock version repaint when??
_Yes that is a very obscure reference._
One leg on mine doesn't hold on much
cool
him snarl swoop
I'm Guessing Rippersnapper Would Like To Rip....
In the thumbnail he’s going wwwhhaaaaaaaaaaaaattt?
My Rippersnapper’s prime armor isn’t loose