Stable Slayers not yet buddy. Check out the 5 things I hate about the fireblade vid. That might be something. Long term view coming soon. After it's 3rd service
Could you please tell me what torque settings did you set your engine bolt? I have the same bike and got the same frame sliders...it would be great to know the torque settings....thanks in advance.
Hey I love your videos. They are helpful so thanks for sharing. I just bought the R&G frame sliders too. Can you tell me the torque specs for the engine bolt and the bolt for the sliders too? Any tips on installing them would be appreciated too. I have the same bike but red. Thanks in advance.
Hello friend, if I disconnect the servo from the plug and put a servo-eliminator, would the silencer valve remain open? I did it but when circulating with the fireblade I did not open the valve after 90 km / h as if it were closed, do you know what I could do?
Jensens Photography aye, wasn't to hard, the colours on the license plate light wires were different from OEM. Can't remember what one goes to what but I called my mechanic and he told me over the phone. Had to strip the whole rear subframe to get to the bolts. Easy 2-3 hour job as your cautious of breaking the fairings
Put a spanner on the nut behind the plastic reflector, and twist the reflector off - You leave the reflector mount on the bike as it holds cables to, so dont remove the mount
List of mods on my bike in this vid! Expand the comments for the full list!!!!! K&N air filter: www.knfilters.com/air-filters/powersports/ha-1017-replacement-air-filter Graves Exhaust: www.gravesport.com/categories/shop-by-vehicle/sport-bike/honda/cbr-1000-rr/2017-2019.html Exhaust Servo Eliminator: www.ebay.com.au/itm/HONDA-CBR1000RR-SP-SP2-Fireblade-2017-Healtech-Exhaust-Servo-Eliminator-ESE-H04-/322862142066?hash=item4b2c155272 Carbon Fibre Heat sheild: www.ebay.com.au/itm/Universal-Motorcycle-Exhaust-Muffler-Pipe-Heat-Shield-Cover-Heel-Guard-Dirt-Bike-/122704879515?hash=item1c91c7df9b&_uhb=1 Mustard bikes Tail Tidy: www.mustardbikes.com.au/cbr1000rr-2017-current-tail-tidy Blackout Wind Shield: www.ebay.com.au/itm/2017-2018-Honda-CBR1000RR-ABS-Smoke-Black-Double-Bubble-Windscreen-Windshield-/323437933435?hash=item4b4e67337b Rear Mud Guard (Not perfect fit but use double sided tape on exhaust side - good enough): www.ebay.com.au/itm/Hotbodies-Rear-Tire-Hugger-Black-fits-Honda-CBR1000RR-2008-2013-/392200383216?hash=item5b50f6eaf0 Engine covers: www.rg-racing.com/browsetype/Engine_Case_Covers_Kits/Honda/CBR1000RR_Fireblade/KEC0101R/ Crash Protectors: www.rg-racing.com/browsebike/Honda/CBR1000RR_Fireblade/2017/CP0426/ Radiator Guard: www.rg-racing.com/browsebike/Honda/CBR1000RR_Fireblade/2017/RAD0212/ Downpipe Grill: www.rg-racing.com/browsebike/Honda/CBR1000RR_Fireblade/2017/DG0022/ Tank Grips: www.rg-racing.com/browsebike/Honda/CBR1000RR_Fireblade/2017/EZRG334/ Reflective Rim Tape: www.ebay.com.au/itm/Motorbike-Car-Reflective-Wheel-Rim-Trim-Tape-Sticker-16-17-up-to-18-Yellow-/172818158364?hash=item283cc3d31c HRC Sock: www.ebay.com.au/itm/Reservoir-Sock-Set-HRC-Honda-Racing-Style-Front-and-Rear-Black/223266660400?hash=item33fbbae030:g:C8wAAOSwEVtb2wKt:rk:2:pf:1&frcectupt=true ProGrip Gel Grips: www.motosport.com/pro-grip-open-end-sportbike-699-gel-grips Black/Red HRC Decals: www.ebay.com.au/itm/8-x-HONDA-HRC-Stickers-Decals-Honda-Racing-Corporation-Fireblade-CBR-2355-/122096919633?hash=item1c6d8b2451
not to hard, same process as all the other blades before it, you need a little flat head screw driver to release the clip on the plug and it will slide off with ease, see my other video here and the description: ua-cam.com/video/zE-yz6oobwg/v-deo.html
Hello Mr Biker... I finally got around to install the exhaust. Sounds great. My question is the FI light the same as the engine light? Only reason I ask is because the engine light came on. The servo company states this... "Take a short ride 3 times. On the next power up, the FI light should stay OFF. " It started to rain so I am unable to take the ride as the website shows. I hope the light goes off tomorrow! -
I hope you bought the correct servo!! I didnt have to make 3 short rides. It disabled the Servo motor FI-light just by plugging it in (thats whats supposed to happen) - The FI light is described in the manual and shares the signal with other faults the bike might have. Whats the product number for your servo eliminator? The one for the 2017 model is: ESE-HO4 (Healtech)
I just realized that I did not fill my oil all the way. I also did the 1st oil change and that's the reason for the engine light. Yup... it's the correct part #. Thank you for your fast response. Thank God I didn't go for a ride, I could thank the rain for that.
You need to talk louder, with more emphasis on things dude. Talking low like that doesn't make this as interesting as it could really be. Practice in front of the mirror, and look at Vlogers like Cycle Cruza and look at how they talk. Throw us those mods like you're tryna sell em. We eat that crap up.
![CBR1000RR TRACK TRANSFORMATION [SP & SP2 MODS + UPGRADES]](http://i.ytimg.com/vi/TUWITUzWQc0/mqdefault.jpg)
![CBR1000RR TRACK TRANSFORMATION [SP & SP2 MODS + UPGRADES]](/img/tr.png)
I want to thank you, as I bought a new SP, and added the Graves ti slip. It sounds amazing, but isn’t too loud, thankfully.
We call them Allen wrenches too. It’s just the metric thing we have issues with.
beautiful bike! nice mods. stay safe and enjoy yourself
love the pure 100% hosnesty comments mate...#spot.on :-)
Thanks for the awesome review
POMMEY BIKER
The ball end allen key is calld a Bondus. Cheers
Buy woodcraft 1.5 riser clip-ons. You’ll have plenty of adjustment.
Gorgeous bike, nice mods, looking forward to bet me one soon😎
great job .. braided brake lines nxt and levers and rear sets
need for a r.hugger is real. Boots get extra wet from the back wheel when it rains
Please show again when it's finished.
also get a blacked out double bubble windshield
Mate love your uploads. What’s happening short sweet ones of late.
Any long ish term review on the bike.
Stable Slayers not yet buddy. Check out the 5 things I hate about the fireblade vid. That might be something. Long term view coming soon. After it's 3rd service
@@pommeybiker Link?
Nice bike brother !! 👍
Can you do an update and show what you’ve added since this video.
In the description is the whole list. I have 2 more parts in the post and will make new videos for one of them
Could you please tell me what torque settings did you set your engine bolt? I have the same bike and got the same frame sliders...it would be great to know the torque settings....thanks in advance.
Hey I love your videos. They are helpful so thanks for sharing. I just bought the R&G frame sliders too. Can you tell me the torque specs for the engine bolt and the bolt for the sliders too? Any tips on installing them would be appreciated too. I have the same bike but red. Thanks in advance.
Hello friend, if I disconnect the servo from the plug and put a servo-eliminator, would the silencer valve remain open? I did it but when circulating with the fireblade I did not open the valve after 90 km / h as if it were closed, do you know what I could do?
with the motor removed from the cables, the spring inside will open it and keep it open!! at least on the 2017 model it did
seen a video on how to put the tail tidy. looks annoying. did you have to splice wires?
Jensens Photography aye, wasn't to hard, the colours on the license plate light wires were different from OEM. Can't remember what one goes to what but I called my mechanic and he told me over the phone. Had to strip the whole rear subframe to get to the bolts. Easy 2-3 hour job as your cautious of breaking the fairings
Hi how did you remove the front reflectors. Wanna do mine. Can't see how to?
Put a spanner on the nut behind the plastic reflector, and twist the reflector off - You leave the reflector mount on the bike as it holds cables to, so dont remove the mount
POMMEY BIKER hell ye. Did it and it's off. Sweeeet cheers
Sticking
Husband
Give some links to all the articles you suggest
Where did you buy your grip tape? Is it transparent or black?
Did the graves come with a logo on it?
Most yanks that live around me call them Allen wrenches
You need some ASV levers in your life mate and a nice puig screen
Lha wong kene notnon motor sebatas menyukai.... Di ungagahi robote cino karo laser e Israel????
can you include the links on where you buy all your upgrades. thanks
will update the comments section with EVERYTHING!!!!
List of mods on my bike in this vid! Expand the comments for the full list!!!!!
K&N air filter: www.knfilters.com/air-filters/powersports/ha-1017-replacement-air-filter
Graves Exhaust: www.gravesport.com/categories/shop-by-vehicle/sport-bike/honda/cbr-1000-rr/2017-2019.html
Exhaust Servo Eliminator: www.ebay.com.au/itm/HONDA-CBR1000RR-SP-SP2-Fireblade-2017-Healtech-Exhaust-Servo-Eliminator-ESE-H04-/322862142066?hash=item4b2c155272
Carbon Fibre Heat sheild: www.ebay.com.au/itm/Universal-Motorcycle-Exhaust-Muffler-Pipe-Heat-Shield-Cover-Heel-Guard-Dirt-Bike-/122704879515?hash=item1c91c7df9b&_uhb=1
Mustard bikes Tail Tidy: www.mustardbikes.com.au/cbr1000rr-2017-current-tail-tidy
Blackout Wind Shield: www.ebay.com.au/itm/2017-2018-Honda-CBR1000RR-ABS-Smoke-Black-Double-Bubble-Windscreen-Windshield-/323437933435?hash=item4b4e67337b
Rear Mud Guard (Not perfect fit but use double sided tape on exhaust side - good enough): www.ebay.com.au/itm/Hotbodies-Rear-Tire-Hugger-Black-fits-Honda-CBR1000RR-2008-2013-/392200383216?hash=item5b50f6eaf0
Engine covers: www.rg-racing.com/browsetype/Engine_Case_Covers_Kits/Honda/CBR1000RR_Fireblade/KEC0101R/
Crash Protectors: www.rg-racing.com/browsebike/Honda/CBR1000RR_Fireblade/2017/CP0426/
Radiator Guard: www.rg-racing.com/browsebike/Honda/CBR1000RR_Fireblade/2017/RAD0212/
Downpipe Grill: www.rg-racing.com/browsebike/Honda/CBR1000RR_Fireblade/2017/DG0022/
Tank Grips: www.rg-racing.com/browsebike/Honda/CBR1000RR_Fireblade/2017/EZRG334/
Reflective Rim Tape: www.ebay.com.au/itm/Motorbike-Car-Reflective-Wheel-Rim-Trim-Tape-Sticker-16-17-up-to-18-Yellow-/172818158364?hash=item283cc3d31c
HRC Sock: www.ebay.com.au/itm/Reservoir-Sock-Set-HRC-Honda-Racing-Style-Front-and-Rear-Black/223266660400?hash=item33fbbae030:g:C8wAAOSwEVtb2wKt:rk:2:pf:1&frcectupt=true
ProGrip Gel Grips: www.motosport.com/pro-grip-open-end-sportbike-699-gel-grips
Black/Red HRC Decals: www.ebay.com.au/itm/8-x-HONDA-HRC-Stickers-Decals-Honda-Racing-Corporation-Fireblade-CBR-2355-/122096919633?hash=item1c6d8b2451
Mate must have ten times already
Only as I have exact same bike can’t ride it as dislocated my knee ffs. Only done 300 miles on her 😤🤤
Stable Slayers ah mate. That sucks!
What do you mean orangey? Looks black
Can I ask how you clean the Matt black paint please mate ?
i use a soap / wax pre-mix with warm water - the wax mixed in with the soap is very light and doesnt ruin the matte finish
Was it difficult to remove the servo? I bought the same pipe and haven't installed it yet.
not to hard, same process as all the other blades before it, you need a little flat head screw driver to release the clip on the plug and it will slide off with ease, see my other video here and the description: ua-cam.com/video/zE-yz6oobwg/v-deo.html
Thank you for the info. I'll give it a try on my next day off. I had my bike for almost a month.... great machine. Ride safe and ya vids are awesome.
Hello Mr Biker... I finally got around to install the exhaust. Sounds great. My question is the FI light the same as the engine light? Only reason I ask is because the engine light came on. The servo company states this... "Take a short ride 3 times. On the next power up, the FI light should stay OFF. " It started to rain so I am unable to take the ride as the website shows. I hope the light goes off tomorrow!
-
I hope you bought the correct servo!! I didnt have to make 3 short rides. It disabled the Servo motor FI-light just by plugging it in (thats whats supposed to happen) - The FI light is described in the manual and shares the signal with other faults the bike might have. Whats the product number for your servo eliminator? The one for the 2017 model is: ESE-HO4 (Healtech)
I just realized that I did not fill my oil all the way. I also did the 1st oil change and that's the reason for the engine light. Yup... it's the correct part #. Thank you for your fast response. Thank God I didn't go for a ride, I could thank the rain for that.
Lha cyber indonesia seneng to mesti wkng au sing di push
Nek aku dewe ibarate sing di hakimi rapopo
He says he’s in Australia but doesn’t have that strange accent they have
Okinawa Nah moved from England 7 years ago. That's why I am Pommey biker. A Pommey is an English person living in Australia
Tamar
Honda sport racing.
Wong dolor pora.
How are you out of breath walking around the bike? Lay off the donuts mate!
Ni
You need to talk louder, with more emphasis on things dude. Talking low like that doesn't make this as interesting as it could really be. Practice in front of the mirror, and look at Vlogers like Cycle Cruza and look at how they talk. Throw us those mods like you're tryna sell em. We eat that crap up.
why would an English guy try to talk like Cycle Cruza? (no disrespect to him)