Thank you Hayden Homes! No father in the household so 19 year old daughter is stepping up to do these new tasks and responsibilities, this helped a lot.
The irritating chirping and the voice saying "low battery" will generally start in the middle of the night. Most often it goes into "low battery warning mode" if you have a big day coming in the a.m., such as if you need to be ultra alert to drive long distance. This incessant reminder happens every 60 seconds, so no catnaps between warnings allowed! Another time the detector will give you trouble is if a fussy infant has just fallen asleep--again, in the middle of the night, after you have spent a couple of hours trying to get the little one to nod off. You can count on these units to quietly do their job when nobody is home to be irritated.
Thanks for your video.We focus on Smart Sensor Alarms(such ad smoke alarms, carbon monoxide alarms, Door Sensor,motion sensor，etc), hoping to provide safety protection for more people, A small item may be able to help many families stay away from disasters.
Good video I just wished u couldve shown how to take the housing off and put back on. But I had a question, ..is a hard wired unit communicating to emergency facilities or landlords at any point??
Thanks so much for your inquiry. The housing should twist off by firmly gripping the alarm and twisting to the left. While the units are hardwired throughout the home, they are not set up to send alerts to emergency facilities or landlords.
I tried to remove mine from the ceiling I can't, it's hard. It won't come out. What to do? I twist it counter clockwise but it won't twist. So frustrated.
I have that detector ... HATE IT. July 4th at 5am it gives me a false alarm (loud enough to wake the dead including my apt. neighbors) and it was bloody hell to get it to stop. Seems high humidity outdoor air (blowing through with a window fan) is enough to set off this damned thing. Replaced batteries per video and it still chirps every minute. Bedroom detectors using 9V batteries never have a problem.
Ok so I just went ahead and did it, you don’t need to turn the power off, just swap the batteries then press the button, it will chirp once and it will alternate between green and red lights, this is its self test so press the button once more and it will be reset and synced with the house. Depending on the exact model you have you may only need to press the button once and not twice like me
Mine too! I’m about to cut it from the wall. I absolutely hate this thing. It comes with a beep plus the annoying “low battery” lady. I just want to cry!
Terrible. How do the batteries go?. It doesn't say which way they go. I replaced them last week. It was quiet but it's chirping again. Put new batteries in still doing it
From another video i saw we gotta slide the battery in but slide it over the plastic thing stick up so essential push it down at same time seems cant push it down by itself once the battery is in already.
Thank you Hayden Homes! No father in the household so 19 year old daughter is stepping up to do these new tasks and responsibilities, this helped a lot.
Ay mine looks similar just missing that sliding thing what do i do it’s so loud
Direct and helpful...thank you!
The irritating chirping and the voice saying "low battery" will generally start in the middle of the night.
Most often it goes into "low battery warning mode" if you have a big day coming in the a.m., such as if you need to be ultra alert to drive long distance. This incessant reminder happens every 60 seconds, so no catnaps between warnings allowed!
Another time the detector will give you trouble is if a fussy infant has just fallen asleep--again, in the middle of the night, after you have spent a couple of hours trying to get the little one to nod off.
You can count on these units to quietly do their job when nobody is home to be irritated.
I think I have heart problems from it now ._.
This is soo true. 😩
LOL i didn’t know i had to press the button to actually get it to recharge. i thought it did that itself. thanks
Thanks for your video.We focus on Smart Sensor Alarms(such ad smoke alarms, carbon monoxide alarms, Door Sensor,motion sensor，etc), hoping to provide safety protection for more people, A small item may be able to help many families stay away from disasters.
Thanks. Fast and to the point.
thanks my mom couldn’t figure out how to do it
Good video I just wished u couldve shown how to take the housing off and put back on. But I had a question, ..is a hard wired unit communicating to emergency facilities or landlords at any point??
Thanks so much for your inquiry. The housing should twist off by firmly gripping the alarm and twisting to the left. While the units are hardwired throughout the home, they are not set up to send alerts to emergency facilities or landlords.
How long is an alarm machine? Should last?
Which way do the AA batteries go in? My detector is not marked.
I tried to remove mine from the ceiling I can't, it's hard. It won't come out. What to do? I twist it counter clockwise but it won't twist. So frustrated.
I have that detector ... HATE IT. July 4th at 5am it gives me a false alarm (loud enough to wake the dead including my apt. neighbors) and it was bloody hell to get it to stop. Seems high humidity outdoor air (blowing through with a window fan) is enough to set off this damned thing. Replaced batteries per video and it still chirps every minute. Bedroom detectors using 9V batteries never have a problem.
do you have to hold or press the button
Didn’t push button to resync..what will happen?
Thankyou very informative!
I have this same exact alarm, do I need to turn off the power to do this or can I just change it right away?
I’m wondering the exact same thing
Ok so I just went ahead and did it, you don’t need to turn the power off, just swap the batteries then press the button, it will chirp once and it will alternate between green and red lights, this is its self test so press the button once more and it will be reset and synced with the house. Depending on the exact model you have you may only need to press the button once and not twice like me
@@oliviagreen8853 thank you!
Thank you for Helping me
I changed the brand new batteries and its still beeping
Clean it
Mine too! I’m about to cut it from the wall. I absolutely hate this thing. It comes with a beep plus the annoying “low battery” lady. I just want to cry!
So, can I just remove the batteries even though I want to do that? It won't malfunction, would it?
Thank you for helping!
THE MOST IMPORTANT PART IS INSERTING THE BATTERIES TO TURN OFF THIS GOD FORSAKEN CHIRP. WHY WOULD YOU RUSH THROUGH THE MOST IMPORTANT PART???
Bellatrix ...not to mention us shorties
Hey I have a question so my needs to be changed but the red thing is stuck on the door
ugh same
yfncollins I fixed mine
It’s pain
yfncollins well it wasn’t rlly fixing it broke but it still works perfectly fine I cant remember if it broke or not
NIKTO what did u do fix it?
I can really see how you put them in. My v6 don’t go in…🤪
Why does it still chirp after I changed the battery
Great Job!
Thanks so so much 😊
How does a common monoxide detect smoke that is invisible
Terrible. How do the batteries go?. It doesn't say which way they go. I replaced them last week. It was quiet but it's chirping again. Put new batteries in still doing it
I opened the sliding part to open the device now it won’t close it’s stuck I don’t want to force what could be wrong
From another video i saw we gotta slide the battery in but slide it over the plastic thing stick up so essential push it down at same time seems cant push it down by itself once the battery is in already.
Which way do my AA batteries go in. It's hard to tell from underneath.
My question too!
Me too!!!
Me too, I had to take a picture with my phone to clearly see it, 9 volts seems to be easier for replacement geez
thanks!
Thank you!! This was really helpful 🙏🏼
)