I really like the 360 degree tilt bucket. What a nice tool for ditches and creek work scooping out in the axis of the ditch and dumping in the back of a truck conveniently. And as just mentioned - the tongs on the back side can snatch up a bucket and place it handy to swap out. Nicer than a thumb if you have one.
It’s like everything else after you have it you won’t leave home with out it. I watch so many people across the pond and it’s crazy what they can do but it’s going to take some of these boys to try it. If they send them out like they do new machines it would work
@@randywilson6869 I guess it all depends on the (extra) cost of a tiltrotator. Chris either doesn't seem to think he has use for one or he doesn't see the added value of it, so I don't hink he would want to pay extra for it. And like he said, it DOES add extra complexity, so extra potential failures.
@@Blazer02LS Very good point. Weight is a serious factor in deciding between what attachments you need and what you would like. The built in tongs don't make up for a thumb but do have their uses.
The tilt and rotor is not part of the bucket, it is known as a "rototilt". The bucket is just a standard swedish grading bucket. You can put any attachment on a rototilt and make it tilt and rotate.
People often say a tiltrotator is expensive, but in fact its not. As long as you have a "Sandwich Coupler" so you can drop it off, for the use of Breakers or Clearing tools and such. But in landscaping and so it can replace a small grader, maybe a skidsteer, as its the perfect toolcarrier for Grading Beams, Compactors, Mulchers and much other tools that often need to be used at different angles, especially in combination witch oilquick or the steelwrist coupler thats quite the same.
@@dustinbrooks8610 Tony Beets is one of my all time favorite people on TV. He's got a fantastic drive and work ethic. He, like Chris, understand that you will not be successful in anything unless you put your all into it, basically bust your ass to get it done. Sometimes you have to bust the asses of your employees too, but that's the price to pay for success. Want pay? WORK HARD!
2:55 they dont really break tho.... they're incredibly durable! I've cleared alot of trees with them. but with your current setup you probably dont need one. But if you did more landscaping and varied you'd def benefit from one. especially one with that you could unhitch without getting out of the machine!
Nice machines. Especially that EC400 looks very nice. The obvious standard tracks though look a little narrow. Probal they have wider versions. It does not matter when they are standing on rocks, but taking those larger ones to a softer ground might be ”interesting”. Roto-tilt is a useful system when you work around buildings, houses and all types of infrastructure like cables, pipes etc. With tongs you can move other stuff like small walk behind compactors. The only job you might have used roto-tilt was when you filled the swimming pool with rocks and you had to turn your bucket. In wast majority of your projects a thumb is much more useful.
Of all the new things that they have on excavators I think the two most impressive useful things that they’ve come up with is being able to calculate and cut a slope or dig. It is specific depth no matter what elevation you’re driving on. That would be so so sweet, it would save me a ton of time jumping in and out or having someone put a damn stick in the hole every 15 or so feet. And you’re right about not knowing how to run all the new stuff, they keep it up. it’s gonna be too complicated For most people to use but then again in the future I think that is their goal is to have somebody sit in their car and run the excavator or in an office off a monitor. It’s just getting so crazy with technology.
That's true I never thought of that. There is a huge dock somewhere in the world and all the big loading cranes are controlled from monitors in offices miles away in the company HQ.
@@martymartin2894 Also 2 mile long iron ore trains (5 locos 250 wagons) in the NW of Western Australia being controlled from HQ in Perth 2000 miles away. Don't have to fly train crews to mine site on a 2 week on, 1 week off roster, they work normal 9 to 5 office hours. 😁🙃
Every other excavator in Sweden have tiltrotators and it has been so for the last 30yrs. The amount of work one operator can do without even get out of the cockpit pays for it, No need for 3 extra machines and 4 extra workers..
It’s amazing how Volvo seemed to have made an electric excavator that seems almost as loud as the diesels just with a high pitch whining and whistle. It’s was much more noticeable on the first video Chris did on the ev machine. Certainly isn’t silent
If you've ever been around electric machines with hydraulics, you'd know they are just noisy. I mean stuff like huge compactors, loading platforms, even elevators. Hydraulic pumps are loud. It actually sounds worse on electric heavy equipment because the diesel isn't covering up the sound of the pump.
I don't think anyone is saying anything with a hydraulic system is silent unless they don't know what they are talking about. Electric vehicles are definitely silent , but a hydraulic pump is still going to be noisy.
That's awesome you got to hang with Tony Chris, so the 950 is same weight class as a 395 correct? People been saying the 950 runs circles around a 395, thanks for sharing Chris and I look forward to seeing the next video as always, 🇺🇲💪✊🤙👍
Thanks for the ride along, enjoyed seeing all the innovations Volvo is offering, after seeing them its all about efficiency and the big thing I saw Volvo working toward operator comfort and ease of operation which also adds to efficiency in my book. Fun tour, enjoyed watching.
Your sheer ability to is what I find engaging about your videos. I will watch you work for hours because watching you work is like watching a chess player play a perfect game with every move.
As Chris is showing us the comfort and luxury of the new cabs, I’m thinking back to the old Bucyrus Erie or Northern cable shovels, with their open cabs directly in front of a grunting old Murphy diesel or a howling 6-71! Progress! (Until all the computers have a pissing match)!
The chainsaw attachment is nice but for reliability ,simplicity and brute force you can't beat a hydraulic AXE. A friend used to operate one for his dad at a lumber mill in Florida, it was a little axe fitted to a skid steer . He could pinch 3 thirty foot red pine at once lay them down and go do 3 more over and over.
What Volvo hasn't included in the cab is the Microwave,for those Factor fresh not frozen delivered to your door Meals . Add to the list ,they havnt changed out that side mirror for a Camera,as we know the mirrors are vulnerable to falling limbs !
Very cool video 😎 very cool to see Tony Chris you are very lucky to be able to try out a machine that was just released not a lot of people can say they got to do it but you can l literally just got a Volvo equipment add 😂 at the end I love how Mike was running the machine 36:30 never seen a cylinder vibrate like that 1:29 love the talking love how you said user friendly that’s cool how the arm rests can be adjusted like that
Do you ever use Scandi buckets over with you Chris? Not seen them used much across the pond! Reckon it'd be a useful addition during your grading/finishing work?
@@andyanderson9165 I'm a viewer who wants to see him succeed in this business and I'm not into that whole pronoun💩if you'll notice I have a beard and mustache you could at least ask if I were his dad.
Chris, I’m a big breakfast food person. The 1st time I went to Sweden, I went to McDonalds for breakfast before my meeting. Man was I surprised! 🎉If you’ve never downed a Big Mac and fries at 6 AM you’re better for it! That was the longest week of my life I think.
Bad ass machines. So good to see them. Tony Beets is the man. Always great to see him. What happened to dirtperfect? Did you trade him in for Tony lol.
Overall very impressive machines and seems Volvo are listening to its consumer/operators. Trust the new machines have a suitable position for mobile phone when placed can be seen by the operator easily.
I don't know why some of you people say things like Chris had to put up with DP they are friends, and they go to each other's houses to work with each other and have fun. Come on, people, get your shit together and leave these two friends alone.
Volvo makes a great machine, I'm glad to see them finally catching up with caterpillar but it seems like every company is just trying to replicate what cat has done with the next gens , the electric controls with no resistance and no fatigue are amazing , being able to check all fluids from ground level , everything being on the screen in 1 spot no more fishing around for climate controls radio ect . I wish john deere would catch up their excavators are awesome in my opinion but the cabs are antique
I can see it niw, Chris can use the tongs to stack concrete that still has re bar in it. And get a set of the folding steps on his 350. With major operating compartment upgrades.
Chris, thanks for the updates on the new equipment, I wish you had given some info on the electric one, hours of service out of a full charge, how do you charge the batteries, on the job site, and the cost to replace the batt, a batt for a 2022 Hynadi IONIQ5 IS 60.000 YES 60.000 GRAND
Straight up, Chris. The electric excavator has a little bucket on it. I suspect a bigger bucket will cripple usage time? I think it is slow to respond, too?
If you add a quick oil system u can eliminate alot of hoses, for those on the boom and stick you could add thick rubber mats as they use in tunnels if you are afraid of sticks n crap damaging pipes/electrics. yes it is pretty expensive but you can do so much with a tilt rotator. like 70% of companies in eu use them on every excevator.
If you get an EL230, you will need to get a 'power trailer' instead of the fuel trailer - it will have a genset with auto shutoff after the excavator batteries are charged full. Good that you and DP are having a nice Sweden trip. Did they preset the excavator display to English for you? What would Grandpa Guins say about that machine? How many scoops of the 400 to fill Barney, 6? Mr. Donnie needs a bigger lowboy trailer to bring you the 950. It should fill Barney in 4 scoops.
Awesome new equipment! Those tilt rotor buckets must be a European thing. I watched Duck Girl do her thing with them. Amazing what one person can accomplish. She is a one person construction crew. Regarding the electric equipment. Most construction sites do not have power on them, let alone enough power to charge one or more large pieces of equipment. How do they purpose you charge them?
So, for the electric version you would need a portable generator to recharge battery's or solar panels and hope the sun shines? Really cool to see Tony Beets. The 550 looks to be a winner.
How do those new machines candles hold up to your new 350 candle I think that you are good on equipment you just need a another haul truck now and then you’ll be all good to go
Multi directional tilting grooming bucket with grappling hooks. Sounds good. Lots of expensive toys. I think Volvo is a great machine.. Wish I had the money.
That is an Engcon tiltrotator, you can put it on eny excavator old or new, small to big. And it's not just for a bucket, the amount of different stuff you can put under these will blow your mind. UA-cam "Engcon" and let your dreams fly free 😁 Cheers from Sweden, were 90% of all the excavators have these since 30yrs back 👍
I bet all his stuff is paid for. He is careful with his money,has bought equipment and slowly improved it then sold it on and is the third generation of Guins.
@kenore4003 He's third generation BUT he is self-made from my understanding. None of this is inherited. He's earned it all on his own. His dad's business went to Uncle John who still has it. It didn't go to Chris and isn't going to be gifted to him. I think that's why he did all this on his own. They were not giving him anything. Harsh but none of my business. His results are pretty amazing and it's all because he worked for it.
@@bobbywelch6035 That does have a way of making a difference in a person’s attitude. My house is paid off my pickup is paid off I’m just coasting along enjoying life. I’m old so it makes easier.
@@LatitudeSky I think the big takeaway of being the third Gen is having the example of how to run a successful business. Seems like too many third gens who inherited the money didn't bother to learn how theoney and reputation were earned. Chris got the point and has run with it. Here is wishing him a great future.
So Chris did Tony invite you up to the Gold mine that would More than likely be an episode or two that would take you past the million Mark and be great for both channel
The next contest for you and Mike is, who can pick up a can of Pepsi with the tongs without piercing it!😉😋 Edit: On a side note, that bright green spiral wrap makes it really easy to see where your hoses are in relation to any hazards. Just going from how it shows up on camera, I would guess it will show very well under UV light. Another option for games with those tilt/rotator buckets would be to set up a line of machines. 1st machine picks up a bucket full of water or whatever, has to swing around to the next machine, which will have it's bucket rotated forwards and up, tip the water into that bucket with minimal loss. Next operator has to pass the water along the line. All take turns and see who loses the least.
I have to commend you on parlaying Volvo's interests in your brand , who could have predicted Volvo's response when you bought the Hyundai. Don't waste it, you could use a larger haul truck !
Electric excavators have there uses but for the type of work you do in the places you work you would have to cart around a gas or diesel powered generator to every job site. I’d like to know how long they will run on a full charge. I wouldn’t think that they would run for 8 or more hours before needing to be recharged but I may be wrong. I can’t even imagine how much it would cost to replace the batteries.
$60k for the outboard charger with built in battery of the same size. It's a container type thing about 8' x 8' x 10'. 7000 kg I don't know what the battery itself costs.
OMG I was thinking at the beginning of the video how it would be so cool if they had Tony Beets or (Beeps as my kids call him for all is swearing). That’s so awesome !
Well Mr. Customer, I got 30 minutes of digging done with the electric excavator, we'll be back tomorrow after a good night's charge. Does that machine stay powered on long enough to dig a hole big enough to bury itself in? If so, by all means, make good use of that time...
It's the other way around. Tony thought it was awesome to see Chris. I see a bunch of you commenters. we're all saying that , but I would want to meet Chris more than Tony, but that's just me
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Those tongs would be so handy. You could pick up the balloons without ever getting out 😅
Awesome machines!
That EC950F is incredible. a 200,000lbs machine and the large bucket can hold 9 cubic yards of material.
And poor barney
I really like the 360 degree tilt bucket. What a nice tool for ditches and creek work scooping out in the axis of the ditch and dumping in the back of a truck conveniently. And as just mentioned - the tongs on the back side can snatch up a bucket and place it handy to swap out. Nicer than a thumb if you have one.
You and Tony Beets in same frame made my day. Bet Geoff will be sorely disappointed.
Volvo builds some really great equipment.
If they had gotten MrAJWorks in there it would have been a trifecta. He also has a video up and gives a batch of the dimensions of the machines.
Chris, Please remember one thing.... A tiltrotator is an attatchment, you put it aside when you doing clearings. 👍
It’s like everything else after you have it you won’t leave home with out it. I watch so many people across the pond and it’s crazy what they can do but it’s going to take some of these boys to try it. If they send them out like they do new machines it would work
Just like cameras you don’t need them until you have them and a lot of people said we don’t need no auto level digging until they got used to it
@@randywilson6869 I guess it all depends on the (extra) cost of a tiltrotator. Chris either doesn't seem to think he has use for one or he doesn't see the added value of it, so I don't hink he would want to pay extra for it. And like he said, it DOES add extra complexity, so extra potential failures.
The catch to that is the weight. There is the thumb already on there, how much extra weight is the rotator?
@@Blazer02LS Very good point. Weight is a serious factor in deciding between what attachments you need and what you would like.
The built in tongs don't make up for a thumb but do have their uses.
Of all the types of work I've watched you do, that bucket is really valuable to you.
That rotate and tilt bucket is a nice implement. One scoop of the 950 would fill Barney
The tilt and rotor is not part of the bucket, it is known as a "rototilt". The bucket is just a standard swedish grading bucket. You can put any attachment on a rototilt and make it tilt and rotate.
People often say a tiltrotator is expensive, but in fact its not. As long as you have a "Sandwich Coupler" so you can drop it off, for the use of Breakers or Clearing tools and such. But in landscaping and so it can replace a small grader, maybe a skidsteer, as its the perfect toolcarrier for Grading Beams, Compactors, Mulchers and much other tools that often need to be used at different angles, especially in combination witch oilquick or the steelwrist coupler thats quite the same.
that steel wrist would be SO useful on pond and dam work..... I could almost see Chris thinking that as he played with it......
Added bonus: getting to hang out with Tony Beets. Just too much awesome in one week = mind blown.
Yeah 3 days with him was fun
Dude, I was like " That's tony"
@@dustinbrooks8610 Tony Beets is one of my all time favorite people on TV. He's got a fantastic drive and work ethic. He, like Chris, understand that you will not be successful in anything unless you put your all into it, basically bust your ass to get it done. Sometimes you have to bust the asses of your employees too, but that's the price to pay for success. Want pay? WORK HARD!
The VOLVO name is a bit smaller on some machines, thanks for taking us on your trip Chris, so interesting to watch 🙂👍
Great video... again showing and testing the new machines out....Seeing the upgrades on them....Stay safe and see you on the next one Chris
2:55 they dont really break tho.... they're incredibly durable! I've cleared alot of trees with them. but with your current setup you probably dont need one. But if you did more landscaping and varied you'd def benefit from one. especially one with that you could unhitch without getting out of the machine!
That tilt rotator would have been handy putting the gravel in the Bealygood pool
Nice machines. Especially that EC400 looks very nice.
The obvious standard tracks though look a little narrow. Probal they have wider versions. It does not matter when they are standing on rocks, but taking those larger ones to a softer ground might be ”interesting”.
Roto-tilt is a useful system when you work around buildings, houses and all types of infrastructure like cables, pipes etc. With tongs you can move other stuff like small walk behind compactors.
The only job you might have used roto-tilt was when you filled the swimming pool with rocks and you had to turn your bucket.
In wast majority of your projects a thumb is much more useful.
The 500 sure could have used a wider stance or a heavier counterweight. Chris had it tipping up off one track withe the loaded bucket all the way out.
The rotation bucket would be nice as far as grading ditches and slopes
Of all the new things that they have on excavators I think the two most impressive useful things that they’ve come up with is being able to calculate and cut a slope or dig. It is specific depth no matter what elevation you’re driving on. That would be so so sweet, it would save me a ton of time jumping in and out or having someone put a damn stick in the hole every 15 or so feet. And you’re right about not knowing how to run all the new stuff, they keep it up. it’s gonna be too complicated For most people to use but then again in the future I think that is their goal is to have somebody sit in their car and run the excavator or in an office off a monitor. It’s just getting so crazy with technology.
That's true I never thought of that. There is a huge dock somewhere in the world and all the big loading cranes are controlled from monitors in offices miles away in the company HQ.
@@martymartin2894 Also 2 mile long iron ore trains (5 locos 250 wagons) in the NW of Western Australia being controlled from HQ in Perth 2000 miles away. Don't have to fly train crews to mine site on a 2 week on, 1 week off roster, they work normal 9 to 5 office hours. 😁🙃
Thanks for videoing this Volvo trip bro they have some great stuff for sure. Safe travels. Ken.
That must have been cool meeting Tony Beets...
I really like the swivel bucket and the teeth that picks up the rocks,..really different,..but cool,..and all the amenities inside the cab,..
Every other excavator in Sweden have tiltrotators and it has been so for the last 30yrs.
The amount of work one operator can do without even get out of the cockpit pays for it, No need for 3 extra machines and 4 extra workers..
Boy the rotating bucket with the claw on the bottom is cool! I’ll bet that would definitely help someone somewhere!
Visit sweden, almost no excavator is without it! :D
And we'll see Mike's video the week of Thanksgiving.....
It’s amazing how Volvo seemed to have made an electric excavator that seems almost as loud as the diesels just with a high pitch whining and whistle. It’s was much more noticeable on the first video Chris did on the ev machine. Certainly isn’t silent
That's the pump motors.
If you've ever been around electric machines with hydraulics, you'd know they are just noisy. I mean stuff like huge compactors, loading platforms, even elevators. Hydraulic pumps are loud. It actually sounds worse on electric heavy equipment because the diesel isn't covering up the sound of the pump.
@@LatitudeSky I know but it’s certainly not silent as they seem to claim
I don't think anyone is saying anything with a hydraulic system is silent unless they don't know what they are talking about.
Electric vehicles are definitely silent , but a hydraulic pump is still going to be noisy.
@@yayinternets so your saying Chris doesn’t know what he’s talking about as he says it’s a quiet machine at the beginning of the video.
That's awesome you got to hang with Tony Chris, so the 950 is same weight class as a 395 correct? People been saying the 950 runs circles around a 395, thanks for sharing Chris and I look forward to seeing the next video as always, 🇺🇲💪✊🤙👍
Hi Chris everyone from northwest Missouri so cool you met Tony the Gold King ❤
That 500 looked mighty fine on you! But I bet the price tag added 2 or 3 gray hairs to your head! 🤩
Thanks for the ride along, enjoyed seeing all the innovations Volvo is offering, after seeing them its all about efficiency and the big thing I saw Volvo working toward operator comfort and ease of operation which also adds to efficiency in my book. Fun tour, enjoyed watching.
Chris is hobnobbing with Tony Beets that's nice.
I've been telling you two y'all need to check out the Tilt Rotator, think it will speed your work up allot
Your sheer ability to is what I find engaging about your videos. I will watch you work for hours because watching you work is like watching a chess player play a perfect game with every move.
Next Week Chris be like "I bought a new Volvo 550"
Naw he'll be buying the 950 lol..
Then he'd be telling Dirt Perfect to try and top that cause ya know that their gonna try and one up each other.
What was the new one he bought recently
@@martymartin2894 350 if im not mistaken
@@420tagalong i seen chris getting a dump truck first i may be wrong but time will tell
@@matt08015 i was referring to the new excavator that he got to finish the abandoned farm job with to handle all them big trees.
As Chris is showing us the comfort and luxury of the new cabs, I’m thinking back to the old Bucyrus Erie or Northern cable shovels, with their open cabs directly in front of a grunting old Murphy diesel or a howling 6-71! Progress! (Until all the computers have a pissing match)!
The chainsaw attachment is nice but for reliability ,simplicity and brute force you can't beat a hydraulic AXE. A friend used to operate one for his dad at a lumber mill in Florida, it was a little axe fitted to a skid steer . He could pinch 3 thirty foot red pine at once lay them down and go do 3 more over and over.
It is obvious that safety and working environment are very important for Volvo.
That tilt rotator bucket would come in handy to keep placing all that rock in someone’s pool build. 🤣🤣
What Volvo hasn't included in the cab is the Microwave,for those Factor fresh not frozen delivered to your door Meals .
Add to the list ,they havnt changed out that side mirror for a Camera,as we know the mirrors are vulnerable to falling limbs !
90% of buckets here in scandinavia are tilt rotators, unless you are working in a quarry
Very cool video 😎 very cool to see Tony Chris you are very lucky to be able to try out a machine that was just released not a lot of people can say they got to do it but you can l literally just got a Volvo equipment add 😂 at the end I love how Mike was running the machine 36:30 never seen a cylinder vibrate like that 1:29 love the talking love how you said user friendly that’s cool how the arm rests can be adjusted like that
Chris you are smooth operator on those new machines!!
Do you ever use Scandi buckets over with you Chris? Not seen them used much across the pond! Reckon it'd be a useful addition during your grading/finishing work?
HIT that 👍 for Chris for taking us to Sweden🙌
What are you his mom?
@@andyanderson9165 I'm a viewer who wants to see him succeed in this business and I'm not into that whole pronoun💩if you'll notice I have a beard and mustache you could at least ask if I were his dad.
Clown 🤡 😂
Pretty Awesome Chris !! Bet that 950 was fun !! Great as Always, Have a Great Evening, And On too the Next !!
Chris, I’m a big breakfast food person. The 1st time I went to Sweden, I went to McDonalds for breakfast before my meeting. Man was I surprised! 🎉If you’ve never downed a Big Mac and fries at 6 AM you’re better for it! That was the longest week of my life I think.
Ah Chris, could you please bring that 500 machine back with you? We need another Volvo excavator!
Nice big boy toys. And a Tony Beets spotting. I hope that boosts Chris's channel 😂. Anyhow, nice stuff.
Bad ass machines. So good to see them. Tony Beets is the man. Always great to see him. What happened to dirtperfect? Did you trade him in for Tony lol.
Overall very impressive machines and seems Volvo are listening to its consumer/operators. Trust the new machines have a suitable position for mobile phone when placed can be seen by the operator easily.
Some really nice machines they got in Sweden. Hope you had a nice trip. I know you had DP to put up with. I am sure you had a fun time.
I don't know why some of you people say things like Chris had to put up with DP they are friends, and they go to each other's houses to work with each other and have fun. Come on, people, get your shit together and leave these two friends alone.
Volvo makes a great machine, I'm glad to see them finally catching up with caterpillar but it seems like every company is just trying to replicate what cat has done with the next gens , the electric controls with no resistance and no fatigue are amazing , being able to check all fluids from ground level , everything being on the screen in 1 spot no more fishing around for climate controls radio ect . I wish john deere would catch up their excavators are awesome in my opinion but the cabs are antique
I enjoyed you demonstrating the new equipment!
Nice machinery Chris. I hope you had a good time with Tony and Mike. I can't imagine what that was like 😂😂.
I can see it niw, Chris can use the tongs to stack concrete that still has re bar in it. And get a set of the folding steps on his 350. With major operating compartment upgrades.
Chris, thanks for the updates on the new equipment, I wish you had given some info on the electric one, hours of service out of a full charge, how do you charge the batteries, on the job site, and the cost to replace the batt, a batt for a 2022 Hynadi IONIQ5 IS 60.000 YES 60.000 GRAND
Volvo is one of the top equipment and engine builder in the world great video thanks Chris and Mike
Straight up, Chris. The electric excavator has a little bucket on it. I suspect a bigger bucket will cripple usage time? I think it is slow to respond, too?
Was waiting to hear if the machines were plumbed for quick release or thumbs, two very important things for Chris.
That 500 was about the size I was thinking you were going to get. The 950 can definitely handle a much larger bucket on it. Fill up that truck quick
If you add a quick oil system u can eliminate alot of hoses, for those on the boom and stick you could add thick rubber mats as they use in tunnels if you are afraid of sticks n crap damaging pipes/electrics. yes it is pretty expensive but you can do so much with a tilt rotator. like 70% of companies in eu use them on every excevator.
If you get an EL230, you will need to get a 'power trailer' instead of the fuel trailer - it will have a genset with auto shutoff after the excavator batteries are charged full. Good that you and DP are having a nice Sweden trip. Did they preset the excavator display to English for you? What would Grandpa Guins say about that machine? How many scoops of the 400 to fill Barney, 6? Mr. Donnie needs a bigger lowboy trailer to bring you the 950. It should fill Barney in 4 scoops.
As we get older our sandpit and toys get bigger and you get to play in one of the ultimate sandpits with Volvos toys.
You mean Rock pit ant no sand in that lot
@@wallbawden5511 The sand grains get bigger along with the toys :-)
I have a feeling Volvo watches all Chris’ vids so they can see what improvements need to be made. He’s a one man QC dept!
sure lakes a plase to plug it in in the middle of know where, jawdrop on the grapple, nice machines for sure , that's a massive bucket 500
I can hear Tony now, "How much fu@#%&! Deeper until I hit *PAY?!* "
Chris- “ I bought a new excavator”
Why ?
Chris- “ The arm rests were nicer”
"And I had Geoff's checkbook."
Awesome new equipment! Those tilt rotor buckets must be a European thing. I watched Duck Girl do her thing with them. Amazing what one person can accomplish. She is a one person construction crew. Regarding the electric equipment. Most construction sites do not have power on them, let alone enough power to charge one or more large pieces of equipment. How do they purpose you charge them?
The tiltrotators are getting traction also in NA, although slowly.
So, for the electric version you would need a portable generator to recharge battery's or solar panels and hope the sun shines? Really cool to see Tony Beets. The 550 looks to be a winner.
Playing around with a machine the size of a 950 is literally my dream 😊
You should go to see Tony at his place and run some equipment with him
A Great equipment for building dam and any con equipment Chris
How do those new machines candles hold up to your new 350 candle I think that you are good on equipment you just need a another haul truck now and then you’ll be all good to go
Multi directional tilting grooming bucket with grappling hooks. Sounds good. Lots of expensive toys. I think Volvo is a great machine.. Wish I had the money.
That is an Engcon tiltrotator, you can put it on eny excavator old or new, small to big.
And it's not just for a bucket, the amount of different stuff you can put under these will blow your mind.
UA-cam "Engcon" and let your dreams fly free 😁
Cheers from Sweden, were 90% of all the excavators have these since 30yrs back 👍
I still think that the old 220 is better, it’s paid for.
I bet all his stuff is paid for. He is careful with his money,has bought equipment and slowly improved it then sold it on and is the third generation of Guins.
@kenore4003 He's third generation BUT he is self-made from my understanding. None of this is inherited. He's earned it all on his own. His dad's business went to Uncle John who still has it. It didn't go to Chris and isn't going to be gifted to him. I think that's why he did all this on his own. They were not giving him anything. Harsh but none of my business. His results are pretty amazing and it's all because he worked for it.
Some people laugh at my car, and I tell them it is paid for, and they generally just walk away without saying anything else
@@bobbywelch6035
That does have a way of making a difference in a person’s attitude. My house is paid off my pickup is paid off I’m just coasting along enjoying life. I’m old so it makes easier.
@@LatitudeSky I think the big takeaway of being the third Gen is having the example of how to run a successful business. Seems like too many third gens who inherited the money didn't bother to learn how theoney and reputation were earned. Chris got the point and has run with it. Here is wishing him a great future.
32:43 what it the turning/swing speed of that machine do they have that stat somewhere...
Chris, you might be able to install the new seats in your existing machines.
Especially in the 350
Hi Chris new Volvos are impressive new 350 that you have I still think it’s a huge machine
Love the guest appearance by Tony Beets.
Next year Chris will be working for Parker in Alaska! 😀
I see Tony was there checking out the 900 ,maybe you and D P might give him a visit up there in his garden 😉
The tip bucket forward angle, was it greater than yours as tipping crush for Jeff's prepool pour From on the new 230
So Chris did Tony invite you up to the Gold mine that would More than likely be an episode or two that would take you past the million Mark and be great for both channel
That 500 is a beast. But that 950 is a monster
Letsdig18 AND the king of the klondike the one and only Tony fucking Beets, wow just wow.
The next contest for you and Mike is, who can pick up a can of Pepsi with the tongs without piercing it!😉😋
Edit: On a side note, that bright green spiral wrap makes it really easy to see where your hoses are in relation to any hazards. Just going from how it shows up on camera, I would guess it will show very well under UV light.
Another option for games with those tilt/rotator buckets would be to set up a line of machines.
1st machine picks up a bucket full of water or whatever, has to swing around to the next machine, which will have it's bucket rotated forwards and up, tip the water into that bucket with minimal loss. Next operator has to pass the water along the line. All take turns and see who loses the least.
I have to commend you on parlaying Volvo's interests in your brand , who could have predicted Volvo's response when you bought the Hyundai. Don't waste it, you could use a larger haul truck !
Electric excavators have there uses but for the type of work you do in the places you work you would have to cart around a gas or diesel powered generator to every job site. I’d like to know how long they will run on a full charge. I wouldn’t think that they would run for 8 or more hours before needing to be recharged but I may be wrong. I can’t even imagine how much it would cost to replace the batteries.
$60k for the outboard charger with built in battery of the same size. It's a container type thing about 8' x 8' x 10'. 7000 kg
I don't know what the battery itself costs.
You need it , I would feel so much better watching your vids in this rig .
OMG I was thinking at the beginning of the video how it would be so cool if they had Tony Beets or (Beeps as my kids call him for all is swearing). That’s so awesome !
What the Beep are you talking about? 😉
Can't wait to see Mike's video reviews in October 🤣🤣
Wow, the computer technology is crazy on these new machines.
Just love the video Chris and thoses exc.
Well Mr. Customer, I got 30 minutes of digging done with the electric excavator, we'll be back tomorrow after a good night's charge.
Does that machine stay powered on long enough to dig a hole big enough to bury itself in? If so, by all means, make good use of that time...
Won’t be long and Chris gonna be saying, I have a couple of really big oaks to clear out so got this here new EC950F😝
Please tell me they have moved the blade control from the left to the right
Pretty awesome seeing Tony
It's the other way around. Tony thought it was awesome to see Chris. I see a bunch of you commenters. we're all saying that , but I would want to meet Chris more than Tony, but that's just me
It would work well on ditches and the sides of ponds
I’m betting Tony went back and told all his friends he got to meet Chris from LD18 !
lots of bells and whistles on that bucket
The screen has a hazard indicator, and Mike will still scratch the counterweight 😂
Flashback to the veternary clinic job with the 550.
Super Articulated Arm, you could pick snakes off the ground and set them out of harms way. Cool with the famous gold digger.