How to Replace Front Wheel Bearings 2014-2019 Toyota Highlander

Buy Now!
New Wheel Bearing from 1AAuto.com 1aau.to/ib/1ASH...
This video shows you how to install new front wheel bearings from TRQ on your 2014-2019 Toyota Highlander.
This process should be similar on the following vehicles:
2014 Toyota Highlander
2015 Toyota Highlander
2016 Toyota Highlander
2017 Toyota Highlander
2018 Toyota Highlander
2019 Toyota Highlander
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obnj/1A...
• Pry Bar 1aau.to/oVc/1AX...
• 10mm Wrench 1aau.to/oXp/1AX...
• 22mm Wrench
• 10mm Socket 1aau.to/obew/1A...
• 12mm Socket 1aau.to/obyL/1A...
• 17mm Socket 1aau.to/obyL/1A...
• 19mm Socket 1aau.to/oajz/1A...
• 21mm Socket 1aau.to/oajz/1A...
• 22mm Socket 1aau.to/ooV/1AX...
• 30mm Socket
• Acetylene torch
• Brake Caliper Hanger 1aau.to/ojd/1AX...
• Cutoff Wheel 1aau.to/oam/1AX...
• Hub Puller
• Press
• Tie Rod Puller
• Locking Pliers 1aau.to/ok6/1AX...
• Pliers
• Snap Ring Pliers
• 1/2 Inch Impact Gun 1aau.to/otQ/1AX...
• 3/8 Inch Drive Ratchet 1aau.to/obyL/1A...
• Socket Extensions 1aau.to/obyL/1A...
• Torque Wrench 1aau.to/oaH4/1A...
• Gloves 1aau.to/oadu/1A...
• Safety Glasses 1aau.to/o6z/1AX...
• Chisel 1aau.to/okL/1AX...
• Floor Jack 1aau.to/o7V/1AX...
• Hammer 1aau.to/oVb/1AX...
• Jack Stands 1aau.to/oVA/1AX...
• Pick 1aau.to/oQP/1AX...
• Rubber Mallet 1aau.to/ogZ/1AX...
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@enjoying_life49]

Having the right tools always makes a big difference. I am unable to find the on car hauler that you used to remove the hub, I have found others, but none like yours. Also when you were trying to remove the bearing piece from the hub that you cut off, what tools were you using for that? A little more detail would be very helpful.

[@enjoying_life49]

When I got a hub puller, all it did was pull the hub towards the knuckle. You need to show more detail on what it presses against in the back of the hub so the horseshoe can pull out instead of everything just being compressed.

[@CSSHAZ3]

Coming from someone who has done like 10 subaru wheel bearings, why are there no seals?!?! I'm about to do this for my sister in laws car and I was dumbfounded that there's not a single seal in there.

[@bittertruth201]

what is the part number for hub puller

[@kaosaelee3146]

Thanks for the video.

[@leonguyen120]

How do you know when to replace bearing?
My highlander 2015 making noise when I goes over 60mph.

[@kadhmkazem5586]

❤❤❤