Great job Moy! I really like that you were able to use up your smaller pieces of plywood. Seems like these accumulate very fast in my garage/shop. I like that your design allows for not only plywood but also lumber! Looking forward to you next video.
Sweet cart Moy... Those projects serves the purpose of storage for all the scraps and pieces of material laying around, and by the time you're done it sits empty because you used up all the scraps... ;) Guess you can always get more..Thanks for sharing..
It's funny you mention that.. I actually didn't lose any shop space. I was able to fit it in my wife's side of the garage. She was very understanding. Thanks for watching houtje
It's a lumber rack, fancy is not the objective but functionality is. I laughed when you mentioned the casters. I'm on the third set with my cart since the it would not with the first two sets unless the cart was empty. Now I have a set of 10" pneumatic casters with grease fittings on the bearings. Still tough to move. I think I need a set of casters like the lumber carts at the big box stores. Maybe my next set. HeHe
good stuff moy !!looks good so far!! i lol when u sd "those little pieces you just cant part with"..lol i know that all too well... i have a box full.. actually 2 boxes..lol..but ya know what? they come in handy for a lot of odd jobs and uses and end up using them sooner then later.looking forward to pt.2. have a good one moy!
Thanks joe. Yeah I usually find a use for those small pieces..sometimes I'll make drawer pulls for bandsaw boxes and stuff like that. I appreciate it bro, have a good one
Great work Moy Its so good to use all the scraps and odd pieces you have on hand to build stuff like this. I so wish i had space for a lumber cart. Cant wait to see the outcome and see how you load it up. Thanks for the vid.
Nice! My belt sander has taken a beating and is still going. Do you have issues with breaking blades on the bandsaw? I do, maybe it's just me doing it wrong..ha ha..thanks for watching
+Moy perez woodshop I don't have any issues with band saw blades... although I always go very slow and do all my intricate work on the scroll saw, which may help.
+Joe basementwoodworking hey joe.. I just found your coment.. yutube marked it as spam. I haven't tried the bladesyou sent me.. but I did have 2 timberwolfblades break n me before .. thanks for the link.. ill have to check it out
Moy perez woodshop i noticed that if theres a link attached to the comment or anything out of the norm itll be marked spam..but those shouldnt break on ya i forget what its c alled but its kinda like reinforcement for bandsaw blades. And yea def check it out . start at the 7:20 mark and its like 2 mins to follow.itll help you tension it properly. .and the limits of a 9,10,14,18 inch bandsaw is too..well,,youll see if u watch the video.haha later moy looking forward to seeing your next video
Great job! The cart is really coming together. I like how you make good use of some of the scrap wood you had in your shop. I try and make as much shop improvement projects as I can with scraps. Keep up the good work and I'm looking forward for part 2!
I wasn't too happy when I put a load on it and it barely moved. Its not that big of a deal. I don't plan on moving it often. If I need to access the back of it, I just open the garage door. Oh well lesson learned.. don't skimp on the casters..thanks for watching!
Great job Moy! I really like that you were able to use up your smaller pieces of plywood. Seems like these accumulate very fast in my garage/shop. I like that your design allows for not only plywood but also lumber! Looking forward to you next video.
Looking good moy. Can't wait to see the final project.
Thanks for watching. I'm was hoping to get everything in one video.. but changed my mind when it was on its way to being a 20 min video..
Great project Moy, an awesome project for scraps, both using and storing them haha.
Yeah.. thanks matt..it is working out great for me
GOOD JOB , I'M WAITING FOR PART-2 , THANK YOU .
Thank you hakeem
Moy Great job using your "scraps". look forward to part 2.
Thanks Mark, I appreciate it
Thanks mark. I have the video done soon
Sweet cart Moy... Those projects serves the purpose of storage for all the scraps and pieces of material laying around, and by the time you're done it sits empty because you used up all the scraps... ;) Guess you can always get more..Thanks for sharing..
Thanks tomy. Yes I always get my hands on plywood scraps. I used most of it on this build though
Good job, Moy. Can't wait to see the finished cart.
Thanks. I appreciate it
Very nice Mate looking good. Thank you for sharing..
Thank you for watching
Nice solid cart Moy! Bring on part 2!
Thanks guys.
Nice! I like the idea of adding the storage drawers.
Thanks chris.. yes it's working out great.
Can't wait for the continuation! Those little drawers ought to come in pretty handy.
Thanks Michael. Yes I have some small pieces that I've thrown in the burn pile... About five minutes later I fish me out...lol
Lol, I thought I was the only one doing that!
Nice build Moy, and great use of any available mtrl.
Thank you sam. Buying wood is always a last resort for me..
Nice Lumber/Storage Cart Moy, should be good to see how part 2 goes. Take Care, Barry from England.
Thanks barry. I appreciate it
Looking good Moy!!!
Thanks
A great look cart... it is that I don't have space for it otherwise i would build one...
It's funny you mention that.. I actually didn't lose any shop space. I was able to fit it in my wife's side of the garage. She was very understanding. Thanks for watching houtje
Nice job!! I will be looking out for part 2!
Thanks tommy, still working on the edit for part 2
It's a lumber rack, fancy is not the objective but functionality is. I laughed when you mentioned the casters. I'm on the third set with my cart since the it would not with the first two sets unless the cart was empty. Now I have a set of 10" pneumatic casters with grease fittings on the bearings. Still tough to move. I think I need a set of casters like the lumber carts at the big box stores. Maybe my next set. HeHe
Yeah now your talking. I'm thinking that would hold up to the weight.thanks for watching.
good stuff moy !!looks good so far!! i lol when u sd "those little pieces you just cant part with"..lol i know that all too well... i have a box full.. actually 2 boxes..lol..but ya know what? they come in handy for a lot of odd jobs and uses and end up using them sooner then later.looking forward to pt.2. have a good one moy!
Thanks joe. Yeah I usually find a use for those small pieces..sometimes I'll make drawer pulls for bandsaw boxes and stuff like that. I appreciate it bro, have a good one
Great job Moy, looking forward to part two,
Merry Christmas and best wishes Harry
Thank you harry and merry christmas
Nice cart and a lot of storage. I built on last year, not as big and it is great. I am sure you will enjoy yours...
Nice! Thanks russ
👏🏼 👏🏼 👏🏼 👏🏼
awesome!!! thank you for sharing your video...
wally Aurora IL
Thank you for checking it out
Great work Moy Its so good to use all the scraps and odd pieces you have on hand to build stuff like this. I so wish i had space for a lumber cart.
Cant wait to see the outcome and see how you load it up. Thanks for the vid.
Thanks patrick I appreciate it buddy
I just built one 28x96x66 and ordered high quality casters half way in.
You are smarter than me andrew..it was rolling okay.. but now than I loaded it up, it is really hard to move..
Ended up getting www.amazon.com/gp/product/B00ZPQNJ66 and they are awesome.
Andrew Latham thank you! My next big build is going to be a mobil mitersaw station, I will definitely order these instead..I appreciate it.
Nice lumber cart, Moy. And a nice way to use up some reclaimed and scrap materials. I'm looking forward to Part 2.
Thanks dave. Yeah I used up alot of scrap on this one
Looks good so far. I have the same bandsaw and belt sander as you do. :-)
Nice! My belt sander has taken a beating and is still going. Do you have issues with breaking blades on the bandsaw? I do, maybe it's just me doing it wrong..ha ha..thanks for watching
+Moy perez woodshop I don't have any issues with band saw blades... although I always go very slow and do all my intricate work on the scroll saw, which may help.
+Joe basementwoodworking hey joe.. I just found your coment.. yutube marked it as spam. I haven't tried the bladesyou sent me.. but I did have 2 timberwolfblades break n me before .. thanks for the link.. ill have to check it out
Moy perez woodshop i noticed that if theres a link attached to the comment or anything out of the norm itll be marked spam..but those shouldnt break on ya i forget what its c alled but its kinda like reinforcement for bandsaw blades. And yea def check it out . start at the 7:20 mark and its like 2 mins to follow.itll help you tension it properly. .and the limits of a 9,10,14,18 inch bandsaw is too..well,,youll see if u watch the video.haha later moy looking forward to seeing your next video
Great job! The cart is really coming together. I like how you make good use of some of the scrap wood you had in your shop. I try and make as much shop improvement projects as I can with scraps. Keep up the good work and I'm looking forward for part 2!
Thanks Mike. I get family members stopping by dropping of scrap pieces from time to time. Its nice to have a place to store all of it now.
Great looking cart Moy, looking forward to part 2
Thanks for watching tommy
too bad you found out about the casters late.
I wasn't too happy when I put a load on it and it barely moved. Its not that big of a deal. I don't plan on moving it often. If I need to access the back of it, I just open the garage door. Oh well lesson learned.. don't skimp on the casters..thanks for watching!