Here is the noise comparison. Interesting fact is that the spin down time on the belt is actually longer - more efficient. Kit available now! endless-sphere...
I was on the wall with the decision of purchasing the belt drive option or not but after watching this video it’s a easy decision now,Thanks for sharing
How does the gearing of this set up compare to stock? Looks like your rear sprocket is larger than the belt kit offered by Luna Cycle, which really only works with the smaller supermoto tires. Very interested in getting a belt drive for my Surron with a equal or lower gearing than is on the stock chain.
Gearing is equivalent to a 52T chain sprocket and 1:8.25 in total(final) reduction final gear ratio. This was Especially made for 19" stock tires plus that you have that extra grunt from below unlike stock 48T which makes the RON a little saggy under acceleration.
WOW Alex this is unbelievable! You've managed to almost eliminate the noise! How much did it cost ? Can it handle more power if you upgrade controller & battery in the future ?
Very cool indeed =) The first proto was expensive, around 60h in development time, and over 600USD in material costs. Hoping to offer a Kit for around 350USD. It can handle way more power for sure, so controller upgrade is not a problem.
@@ioannischerouveim7239 It is equivalent to Motomotos 52T sprocket (stock is 48T) Top speed with this one and sine wave controller is the same as with stock sprocket and stock squarewave controller but you get a lot more torque. One of the best combos if you ask me.
Yea but is it as strong as a chain ? I bought mine the dealer said not to upgrade to the belt as a Stone can snap the belt when it goes between the belt and sprocket
made of rubber like a tyre that dries out and cracks..so it should last as long as a tyre..not very..lets replace a robust metal chain with some rubber..going over bumps makes alot more noise than the chain and belt put together..so anyone with a belt drive certainly wears a mask
Alex thanks to you i have converted to belt, pedal kit and mountain bike seating looks amazing. I will post you a picture later
Damn that belt is so much quieter than chain :O
moro :D
I was on the wall with the decision of purchasing the belt drive option or not but after watching this video it’s a easy decision now,Thanks for sharing
amazing huge difference with the BELT :-)
Snyggt Alex, bra upgrade!
How does the gearing of this set up compare to stock? Looks like your rear sprocket is larger than the belt kit offered by Luna Cycle, which really only works with the smaller supermoto tires. Very interested in getting a belt drive for my Surron with a equal or lower gearing than is on the stock chain.
Gearing is equivalent to a 52T chain sprocket and 1:8.25 in total(final) reduction final gear ratio. This was Especially made for 19" stock tires plus that you have that extra grunt from below unlike stock 48T which makes the RON a little saggy under acceleration.
Do you have plans for that stand I would like to make one
How has the belt been?
like how’s maintenance?
and how often do you need to replace belt ?
can you flip wheel over and reverse 3 phase so belt can be on left side ? or is motor sprocket too inboard ?
Dude I need this! Let me know when you make the kit ready
See this endless-sphere.com/forums/viewtopic.php?f=28&t=89902&start=3175#p1451555
Did you make the bike stand as well? Been looking for something like that...
Yep, self made!
WOW Alex this is unbelievable! You've managed to almost eliminate the noise! How much did it cost ? Can it handle more power if you upgrade controller & battery in the future ?
Very cool indeed =) The first proto was expensive, around 60h in development time, and over 600USD in material costs. Hoping to offer a Kit for around 350USD. It can handle way more power for sure, so controller upgrade is not a problem.
@@ridecrypto Aha great update then! What about the top speed? The back sprocket looks bigger now so is the top speed much slower?
@@ioannischerouveim7239 It is equivalent to Motomotos 52T sprocket (stock is 48T) Top speed with this one and sine wave controller is the same as with stock sprocket and stock squarewave controller but you get a lot more torque. One of the best combos if you ask me.
much better noise level! what about dirt and sand , if you ride offroad? is it kevlar belt?
Should be fine with offroad as long it is dry/semidry. It is carbon belt
Awesome
Yea but is it as strong as a chain ? I bought mine the dealer said not to upgrade to the belt as a Stone can snap the belt when it goes between the belt and sprocket
Depends on where you ride, normally the belt looks like new while the pulleys are worn down to 50%
Chain is stronger anyway
Do you have these back in stock yet?
do you ride trails or street? Is riding in dirt going to be problem with belt?
Mostly dry trails, wet dirt will wear it out faster
@@ridecrypto I've been staying out of wet stuff for the most part. I bought the belt kit but have not installed yet. looks like i'm slapping it on
Hej, kan man sätta på det här beltkittet på motarhjulen?
Jadå men topphastigheten blir lägre. Motardhjulen är ju mindre. Får kanske bygga mindre bakdrev för remmen om man vill ha samma hastighet som förr.
Då kanske det är bäst att bara byta däck till några lite mer slicksdäck? Har du beltkitet redo till försäljning?
@@loco2502 Ja, bäst är att byta 19" crossdäck till gatdäck. Kittet kommer vara tillgängligt om ca 3v.
Belts no good for off road only on road as soon as stones get under the belt don't last long
Are you testing with the square or sine wave controller?
Both are Sine
thats def the square
Cool * * * * * * * *
But make only sense with a stock surron, and nobody want to drive his Surron stock 😅
Why, I drive it with NUC at over 14kW, belt can take around 20.
made of rubber like a tyre that dries out and cracks..so it should last as long as a tyre..not very..lets replace a robust metal chain with some rubber..going over bumps makes alot more noise than the chain and belt put together..so anyone with a belt drive certainly wears a mask