Hi. Complimenti per il video ! È l unico che spiega come posizionare le ganasce le molle ed il senso delle parti . Ottimo ! Tolto il disco in 1 minuto si montano e registrano .
@@vysgarage HI I have a 2006 z4 m with 38,000 miles, the parking brake on the passenger side of a left side drive car sticks a bit after being on a hill. Is the parking brake on both rear wheels or just one? Should I just order a new e brake set before I disassemble it to save time, or should I see if it just needs grease?
Bro! You are a lifesaver! It's now 12:42 am I've been struggling with these shoes for so many hours I've finally got them in thanks to your video! Subbed
Don't know how old this beemer is or what model but the actuator on the E46 models doesn't look like that. It doesn't have have the closed cable hitch and the cable has a talurit not and eye and pin. Apart from that the rest is ok.
@@flatout3577 You need to have the hand brake off and back the adjustment nuts off on the cables at the lever end as far as you can without them coming off. That should give you about 2 inches more length at the actuator end. When you have reassembled the brake assembly you need to adjust your cables at the lever end.
@@veritasaequitas9875hello. Could you please give me more details on last step cable adjustment , done the rest but now my handbrake seems to not react at all . Do I need to remove whole middle console for access?
@@Aubreysangel666 I responded to this last night but it appears to have disappeared. Maybe it's because I posted a link to another UA-camr's content. Google "50sKid handbrake adjustment instructions". Watch that.
Best tutorial on this subject on UA-cam. The spares/parts are clean, good photography and clear voice instructions. Keep them coming.
Clear and objective explanation. Helps a lot anyone who needs to work on the hand brake mechanism, especially if it's for the first time.
Excellent tutorial. Especially like the use of the pink fabric that allows the parts to pop out. Thanks so much!
Well done and brief. No unnecessary noise to detract from the signal. Excellent job.
Hi. Complimenti per il video ! È l unico che spiega come posizionare le ganasce le molle ed il senso delle parti . Ottimo ! Tolto il disco in 1 minuto si montano e registrano .
Grazie 😁
@@vysgarage le asole sono diverse ! Dx fori sx tagli . Delle molle . Ciaoooo
Great video. Made a tough looking job very simple. No BS and straight to the point. Subscribed. Cheers.
Thank you 🙂
@@vysgarage HI I have a 2006 z4 m with 38,000 miles, the parking brake on the passenger side of a left side drive car sticks a bit after being on a hill. Is the parking brake on both rear wheels or just one?
Should I just order a new e brake set before I disassemble it to save time, or should I see if it just needs grease?
Excellent. Clear and concise 👌🏾
Bro! You are a lifesaver! It's now 12:42 am I've been struggling with these shoes for so many hours I've finally got them in thanks to your video!
Subbed
Thank you 😂👍🏻👍🏻
Thank you this seems impossible to mess up if you watch this video but if you don’t it is impossible I know from first hand experience
Thank you! Straight forward with clear instructions 👍🏽
Such a good video! Very well explained for a short video! Thank you!
Thank you for sharing your experience; it's an excellent video. I also found seven clicks back too much and settled at five.
Great video watched 6 before this ,well delivered and simple instruction
fast, easy and really understandable! thx a lot.
Simple and to the point Thank you and good work.
Thanks this is just what i needed 🙌🏻
Fantastic video! Very well presented, many thanks.
Great video sir. Great commentary and angles.
Very good tutorial 👌
Thanks so much for this.
very concise. Easy day.. Subscribed
Great video!
Thank you
Very education🎉❤❤❤
I Love it thx ❤❤❤
Thanks for an informative video .
Good
Don't know how old this beemer is or what model but the actuator on the E46 models doesn't look like that. It doesn't have have the closed cable hitch and the cable has a talurit not and eye and pin.
Apart from that the rest is ok.
How did you do the e46 my cable is barely out the hole😢
@@flatout3577 You need to have the hand brake off and back the adjustment nuts off on the cables at the lever end as far as you can without them coming off.
That should give you about 2 inches more length at the actuator end. When you have reassembled the brake assembly you need to adjust your cables at the lever end.
@@veritasaequitas9875 cheers mate ive sorted it 👌
@@veritasaequitas9875hello. Could you please give me more details on last step cable adjustment , done the rest but now my handbrake seems to not react at all . Do I need to remove whole middle console for access?
@@Aubreysangel666 I responded to this last night but it appears to have disappeared.
Maybe it's because I posted a link to another UA-camr's content.
Google "50sKid handbrake adjustment instructions".
Watch that.
Just about to do this! Thanks
Very useful! Thank you
How do you adjust it when the brake disc is covering it?
Thank you!
Thank you 😊
Nice video:)
Try doing that with new bits
Would the 18mm shoes fit if stock was 16mm and I have rotors with a bigger internal diameter? Desperate!
Hi,
No they won’t.
I make rotor inserts to convert the rotors.
@@vysgarage so with inserts I could keep the rotors and use 16mm shoes? If that's something you sell I'll give you a call today 👍🏻
@@goreallyspeed4819 yes
@@vysgarage thanks, just messaged you on FB
Just did mine but the retaining clip popped out wojld I need to replace the dust shield?
Ideally, yes. But you can also make a little washer with a slotted hole in it as a temporary measure.
so how do you adjust that adjuster when the rotor is on??
Through the wheel bold hole.
Is there one on both sides or just the passenger side?
Both sides