I bought the USA version a few days ago, CS7310P, what a friggin beast, and its not even broke in yet!!!!!!!!! I`m a Stihl guy at heart, but Stihl prices have gone full stupid. Why buy a Stihl when you can buy THIS Echo saw for almost half the money! Not a single regret after running this Echo! Not to mention, this saw is a gas sipper compared to my Stihl`s in the same CC class with no doubts!
Děkuji za komentář - mám více echo pil - žádná nikdy neměla problém a to jsou cenově dostupnější. O Husq jsem slyšel, že už nejsou tak dobré jako stihl a jelikož jsem fanoušek echo tak jsem nad tím nepremyslel vubec. Jinak tuto jsem koupil zanovní po známém, který měl úraz, takže za babku defacto nová a do těd jede jako drak - jediný co se musi po době vyměnit je šnek, který se otáčí a posouvá mazání lišty pumpu.
@@matejkubis Diky za odpověď, já jsem fanda starých Husqvaren. Ale Echo se mi moc líbí, hlavně teda ty malý s ležatým motorem. Co jsem četl tak Echo a Shindawa má nejkvalitnější pokovení válce. A ty kovaný lišty jsou perfektní. Prostě japonská kvalita, lidi je hodně podceňují. Hodně profesionálů co jsem s nima mluvil mi řeklo že Husqvarna 5xx už tolik nevydrží co předchozí řady. Ale žádnou z nich nemám a řežu málo, tak nevím.
It's running at the max rpm that it's tuned for through the cut, making the '4 stroking' sound. It's tuned fine, will make money for many years trouble free. My dolmar 7910 was the same, unless you had a long bar and a big enough job it would just bounce off the max rpm through the cut. Even with a new/perfect chain you would have to lean on it with smaller bars/wood to put enough load on the engine to bring the rpm's down. These big saws really rip.
This is the best real world test I've seen on UA-cam too date this is the saw I will purchase. Good job guy.
Thanks! still runs great,
@@matejkubis2t oil mixs 50/1 ? Motul 710 2t ok oil ?
@@Okinawa1914 2T oil 1:50 Echo PowerBlend is what I use. - But Motul 2T should be OK also.
@@matejkubis 👌👍
Loving the Echo chainsaws.
Me too!
Me too... I have 6 echo chainsaws. Dont want any other
I bought the USA version a few days ago, CS7310P, what a friggin beast, and its not even broke in yet!!!!!!!!!
I`m a Stihl guy at heart, but Stihl prices have gone full stupid. Why buy a Stihl when you can buy THIS Echo saw for almost half the money!
Not a single regret after running this Echo! Not to mention, this saw is a gas sipper compared to my Stihl`s in the same CC class with no doubts!
Very true, the chainsaw is too good for the price. use it almost daily.
Whats a gas sipper?
I'm with you, Stihl prices are insane, even the used ones are damn near priced like new saws. I'd love a 500i, but not at $1700.00.
Really runs great !
Got yourself a new subscriber !
thanks m8.
L̶o̶v̶i̶n̶g̶ making love to the Echo chainsaws ✅
That is amazing.
Klobouk dolu chlape , jsi borec s takovou kobylou ve výškách , mám 621 a 501 a jsou opravdu dobré , palec nahoru , odběr a přeju hezkou neděli .
Děkuji moc za kometář, je to tak! Ale echo zatím paráda. At se vám daří. Hezký den.
Impressive.
thanks for watching.
Enjoy the review of the Echo saw cutting.
Zdravím,zvažuji koupi této pily dá se jí věřit? Dík za odpověď.
Profesionálně se s ní živím, je to držák.
@@matejkubis Tak jsi měl pravdu je to mazec ta pila. Kubíky přibejvaj jedna radost.
@@Zetor6718 velmi rád s ní dělám.
Pěkný video. Chci se tě zeptat. Proč sis nekoupil 372xp? Cena je skoro stejná. Zajímá mě srovnání těhlech dvou pil.
Děkuji za komentář - mám více echo pil - žádná nikdy neměla problém a to jsou cenově dostupnější. O Husq jsem slyšel, že už nejsou tak dobré jako stihl a jelikož jsem fanoušek echo tak jsem nad tím nepremyslel vubec. Jinak tuto jsem koupil zanovní po známém, který měl úraz, takže za babku defacto nová a do těd jede jako drak - jediný co se musi po době vyměnit je šnek, který se otáčí a posouvá mazání lišty pumpu.
echo je velmi kvalitní značka. japonci.
@@matejkubis Diky za odpověď, já jsem fanda starých Husqvaren. Ale Echo se mi moc líbí, hlavně teda ty malý s ležatým motorem. Co jsem četl tak Echo a Shindawa má nejkvalitnější pokovení válce. A ty kovaný lišty jsou perfektní. Prostě japonská kvalita, lidi je hodně podceňují. Hodně profesionálů co jsem s nima mluvil mi řeklo že Husqvarna 5xx už tolik nevydrží co předchozí řady. Ale žádnou z nich nemám a řežu málo, tak nevím.
@@addis8268 je to tak. moje zkušenost i kamarada je zatím super s echo, ale nikde to moc neříkej, nebo to bude stejně předražené jako stihl a husa :D
Daaaaaammmmnnn!!!!
thakz. a good saw
Sounds like it surges at high rpm. Does it need tuned ? Great looking saw
idk tbh, never did I inspect the RPMs cause it runs like i prefer to do my work, but surely there are ways to make it better.
Thank you for the reply
@@coreyriley7160 np if you search on YT there are people doing echo tunings
It's running at the max rpm that it's tuned for through the cut, making the '4 stroking' sound. It's tuned fine, will make money for many years trouble free. My dolmar 7910 was the same, unless you had a long bar and a big enough job it would just bounce off the max rpm through the cut. Even with a new/perfect chain you would have to lean on it with smaller bars/wood to put enough load on the engine to bring the rpm's down. These big saws really rip.
@@nothanks9050 true
Puedo ponerle una espada de 15 pulgadas.
si, oregon o husqarna o echo o dolmar etc. pero más grande es mejor
Sounds like it would have NO PROBLEM running a way bigger bar. Seems too small for the engine
I can definitly rip with longer bars. But it also depends on your wood type. Have a nice day
Yes, much too less load
Long bar mite be too heavy for him !
Echo/Shindaiwa 731 SX maden in USA/Mexico/ China?
Its Europe 7310 SX, made in japan.
@@matejkubishave you tried shindaiwa products?
@@goranpavlovic9051 no, but it should be almost the same as echo, so do your research on that and I Guess you should be OK with them.
Loving the Echo chainsaws.
Indeed.