"""DONT Overclock your KS0 Ultra"""
Вставка
- Опубліковано 7 лют 2025
- Firmware go here: t.me/swift_mining
Get your parts:
➡️KSO Ultra via Yesmining: yesmining.io/?... Code M20 gets you $20 off per item
➡️Buy the 330w PSU: amzn.to/3zNqjnS
➡️Cheaper PSU: amzn.to/49qbpjU
Other Parts:
➡️Fan Shroud from ME: www.etsy.com/s...
➡️Print your own shroud: www.thingivers...
➡️ AC Infinity Fan: amzn.to/3Wo6dco
➡️ 12v Fan: amzn.to/4bxPxoo
➡️ Thermal Grizzly Paste: amzn.to/3w8QzHn
➡️ Thermal Glue: amzn.to/3Sv8dwr
➡️ 5mm Copper Heatsink: amzn.to/489efZl
➡️ 230W PSU: amzn.to/49qbpjU
➡️ 120v Axial Fan: amzn.to/3OCBjsJ
➡️ 12v Fan controller: amzn.to/3OAkG0M
➡️ 3d Printer I used to print these (cheap, beginner model) amzn.to/3SwTXDl
➡️ Better, faster 3d printer: amzn.to/49plj5h
➡️Screwdriver set for electronics: amzn.to/3WqvBys
⚙️ Mein Links ⚙️
⛓Twitter: X.com/TheTechnicals
⛓Aggregated Links: linktr.ee/thet...
⛓Amazon Store: www.amazon.com...
⛓AI Workload Earning (Not Mining): Salad.com code 275N79 for a bonus
⛓Beginner Mining (Nicehash) (No fancy equipment needed): bit.ly/3P1kl7u
⛓Intermediate/Advanced Mining (HiveOS): bit.ly/431Ui62
⛓Unmineable (Get paid in coin of your choice): unmineable.com...
⛓ Buy my 3d printed stands: TechnicalsMatt.etsy.com
⚙️Buy Hardware That I Use & Feature ⚙️
⛓Tangem Wallet: The only HW wallet I use (10% Discount): tangem.com/pri...
⛓ASIC and FPGA From JingleMining: www.jinglemini...
⛓Crypto Miner Bros: Trusted ASIC Seller: bit.ly/3TdqDDr Use Code “Technicals” for $50 off!
⛓ParallelMiner: PSUs, Parts, Cables: bit.ly/3v397Zo
⛓My 3d Printer: amzn.to/49plj5h
⛓My C****** Knife (Buck 102): amzn.to/3uFN8aF
⛓Portable USB Powered 11” Monitor: amzn.to/3SW8IQh
⛓Primochill WetBench: amzn.to/47DFhrw
⛓Drok Meter for monitoring power: amzn.to/3uW7BrY
⛓ColEngine P2 FPGA from JingleMining: www.jinglemini...
Email me: TechnicalsMatt@Gmail.com
If you use my amazon links to buy stuff, I get a commission (Thank you!)
⚙️Real G’s Tip Me ⚙️
🧻 BTC: bc1qu4zl3kl3ajgmcnsv23jp9r5w98wazrss6shta6
🧻 ETH: 0x48A6D6487787aCb9084B265c4f698090ABD3cAff
🧻 USDT: 0x48A6D6487787aCb9084B265c4f698090ABD3cAff
🧻 SOL: 9pMAAF9DA8p2RmhBhWhzSoDwyertmzfWQtRXvtoJYLMA
🧻 USDC: 0x48A6D6487787aCb9084B265c4f698090ABD3cAff
🧻 DOGE: DRFw9AghRs6WDt1LUPtTn6omfxfCBEBT5f
🧻 ADA: addr1q9f8lweppckn847pztayju5m2nsdx7swj2ll2ssrgcpu4j2j07ajzr3dx0tuzyh6f9efk48q6daqay4l74pqx3sretysm92jc5
🧻 ETC: 0x828040FC7e4F009C97Fe804579807077A8f35F0e
🧻 RVN: RVWtr95tGSD4MSGNykDn42xLSPaaFbB6Ae
🧻 ZEPH: ZEPHYR3ReJ2WZFPCCVKMZwfRKUQYBjzYViFTfJHavDtoVkzok937SFm3tWdEeN4fCmHPJM375UyB9YEYPd8NQh5gALRAmigABkv2V
“TheTechnicals” is not a financial advisor. The information contained within this media is for informational and entertainment purposes. The Technicals assumes no responsibility for any actions taken by viewers. We encourage viewers to do their own research on products, services, and investments themselves.
#cryptomining #gpumining #cryptocurrency
Hobbyist miner also did not confirm the new IP address until after he hit the reset button. He can use a super old laptop to remote in that way, heck he can use a complete different network than his home network. I still think Hobbyist miner f'ed it up himself. And his stance of not wanting to recommend it is just false IMHO. I've OC'ed 2 here at home and they've been chugging away perfectly. And at the way the Kaspa network hashrate is going through the roof it only makes sense to OC it. Dont find yourself regretting 6 months from now for not OC'ing. And if you get a second one then stop being babies everyone and OC that one too. The chart in this video just makes pure sense.
Pinned
I want as much hashrate as I can get right now. Mines been running steady but I get why people don't want to mess with the overclocks. All good points in your video
Thanks for bringing attention to this. To add some more details for everyone. I did this LIVE on Stream, so the VOD is out there. I took the KS0 Ultra which had been mining for 10 days and removed the side panels.
My goal was to see how far I could overclock it on JUST air cooling with an 800 CFM 8Inch AC Infinfity Inline Fan.
I didn't plan to do any MOSFETs for new Thermal paste.
I followed the Read Me and did the Intialize Firmware. That bricked my unit. I never even got a chance to get to the actually OC Firmware Phase.
I don't recommend this Firmware at this time, as if you Brick it, you need to give someone remote access to your network to "fix" it and pay for them to fix it....
Not worth the risk, just buy a second unit honestly.
You did all that math without taking your shoes off. Congrats!🎉
Useful content and funny too! Great work!🤜🤛
Sending a friend your way brother to buy some shrouds
You guys are too good to me
@@TechnicalsMatt well seeing as how you make me piss my pants on a regular it's the least I can do 😉
By the way... Tswift personally told me he never told Hobbyest to hit the reset button.. Also, oddly enough, UA-cam banned me for 5 days from commenting funny enough after I called Hobbyest out on this in his comments section... Just saying. I could be wrong, but the timing was funny.
Careful, his posse will roll up on you
@@TechnicalsMatt MS13 already knocked on my door... Fkers rolled up on me at a red light yesterday too... I thought for sure I was gonna see the tech 9 come out. 😏
I bought all the stuff but need to OC mine still. Definitely important to get that extra yield.
Good idea...I just can't stress enough, follow the directions to the T and read them over and over and over. Too many people are bricking their ultra's because they can't seem to follow directions. It amazes me really. And then you get some youtubers who can't admit when their wrong and then trash a beautiful piece of firmware.
I only did the 565 and its been fine. Only added fan on outside and upped the psu. So far so good and its hit 600 sometimes lol.
Just keep your internal fans at 100%
@@RainBitcoins I just let it run and it works fine if the chips cool down too much it seems to run like crap now if i was gonna do higher than 565 i would do the mods and the fancy shrouds and fans for sure
@@FrogmanMining ya but running the fans at 100% is not for your asic chips...its for the 4 vrm chips that we put copper heatsinks on. If you allow the fans to be controlled solely by the Ultra your vrm's are gonna get too hot. And the issue is we don't know nor does the ultra know how hot they are getting as they are temp controlled nor fan controlled. Hence leave your fans at 100%. It also says to do this in the OC instructions.
You NEED to really read and understand the instructions, and do the right cooling mods (AX-6 paste, good pads, shroud, Axial fan, etc.). In most cases, with that it works like a charm. Both of mine are running solidly around 600Gh/s even after playing with 676Gh using a 330W. Definitely worth it to overclock and better than buying another KS0 Ultra
THANK YOU
100% agree
Now i'm a bit nervous...lol. Noob to mining- not overclocking. So- if I follow your steps in the OC video you did- I should be good, correct? Also- I do not have access to a shroud- can I pay someone to make one and ship it to me?
I sell shrouds on my etsy if you still need one technicalsmatt.etsy.com
Lots of people OC with success, just follow the directions in Tswift's TG channel/readme closely.
I did all the mods internally. Mine is running at 562 with no outside fans just stock ones at 100% waiting for my shrouds to arrive from you ❤
Edit: it cost me less than $100 to do this
theirs a reason why some asics dont come OC'd already..
Which ones come already OC'ed?
He didnt, it was the firmware, but i think he knows how to restore. He is going to do a live next week
so far my KS0 Ultra with Tswift OC is hashing over 562GH 24hr avg - been over 4.5 days so far and stock mods, only upgraded PSU
Without extra fun?
I read the instructions and am getting around 629 gh/s using 618G software, maybe going to try higher in a day or two.
Yea I’m pretty scared to do the overclock. Hopefully someone can find a fix for bricked KS0s so that we don’t have to pay so much for repair fee
repair fee, i need a copy of that
selling people stuff that bricks their machines and then fix peoples machines for a fee is one of the best scams in a long time
@@Hansen710 yea super suspicious. Hopefully farmer releases an overclock that is less scammy (probably won’t happen though)
This fw is not scammy at all. tswift has too much on the line to F around like that
@@Hansen710 If I designed software that you decided to use and bricked your stuff because you can't follow instructions properly then you better believe it I'm gonna charge you for you laziness.
I have to try this! Just ordered 10 shrouds (2x5 packs) from you. Great price, but I feel violated by the $200 shipping to Norway. Some of your used socks or something as a bonus gift?
I'll autograph the shrouds, thanks for the order! I think I need a 3rd printer. Sheesh!
@@TechnicalsMatt I'd appreciate that. Signatured shrouds should give my ks0's extra horsepower......I mean hashingpower.
Looking forward to them, Sir
I think to overclock it almost done with all the stuff that need, but i have no idea how i am gonna so with the fans….need some ideas about fans plug in the wall….cant buy those infinity fans over here….
12v 120mm fans will work too, like asic fans, just need an adapter to 3/4 pin
I got the BeQuiet Silent Wings Pro 4 120mm PWM 3000 rpm. Their made in Germany and very well priced....and quiet.
after mod KS0 Ultra is only hashing about 1GH. i re applied thermal paste/pads, installed the heat sinks on the mosfets. moved the fans to the outside of the ultra. I plugged back in and im getting 1GH. I thought it was a power supply issue, but i tried a different one and no luck. I reverted back to the original Iceriver firmware. Still getting 1GH. Any suggestions?
It was at 400gh prior to changing anything, right? Did you try the different firmware variants (L, ~, H) etc?
@@TechnicalsMatt yeah it was hashing 400GH on stock iceriver firmware. when OCs came out i tried the 505GL. That worked fine. I wanted to get up to 600s so i got the thermal glue, heat sinks, 3d printed the shrouds. I did the mod. Typical straight forward mod same as we've all done on the KS0 Pros and original KS0s. I let the glue cure for 24 hours and i put everything back together. She fires right up and i can get to the UI just fine but it won't do more than a few GH. I opened the monitoring tool TSwift gave us and chips are all green but there is no voltage or anything going to the chips. I opened it back up and everything looks fine. I don't think i damaged it. I tried a different power supply and same thing. I reverted back to original Iceriver firmware and it's still getting 5GH.
Thank you for your information. Currently, my ks0 ultra reports an error of not accessing the ip address and the green and red lights turn on at the same time. do you have any way to fix it?
Did you OC it? If not do a reset
@@RainBitcoins I have OC it and got an error. Could you help me?
Why would anyone waste money and hydro on Kaspa. No ROI, returns are shit.
hydro?
Really? My returns are pretty darn good...no complaints here.
@@TechnicalsMatt hydro... he meant a god dam
KS0 Platinum 600 GH coming soon....
KS0 Adamantium BiTurbo 4matic Overtrail Edition 4.0.56 Eddie Bauer exclusive pack
@@TechnicalsMatt dont forget 4x4
@@LeeFall hahahahaha
Is anyone working on an OC for the new AL0?
not sure it's possible, yet..
It wasn't even launched! Lol! 😂😂😂
Wait?!? I thought you were the hobbyest miner?
I'm the hobbyless miner
@@TechnicalsMatt lmao
Uh oh
no uh oh, complete bait title!
🤣 its pretty much a kso pro using 100w less