If I were to use this to transplant from a damaged PCB from an original cart, are there sockets for the special chips? I have a cart with some worn down pins for the console interface. I am just looking for something to transplant all the chips over and then replace the caps and resisters with new.
Quick question, would your boards be good for transplanting from OEM boards? during my childhood lets just say i didn't treat the my games good and the pins are corroded from blowing in them. Would love to give my old games a new life on a brand new PCBs.
The Basic boards are designed to be board replacements! As long as the games don't use any specialty chips like the SuperFX or SA-1 mousebitelabs.com/2019/08/12/how-to-make-a-snes-reproduction-cartridge-quick-guide/
Can I ask where you purchase your 42 pin sockets? I bought a handful for making my own test cart and even with a lot of trimming I couldn't get them positioned flush with the pcb for both a lorom and hirom config like you have.
I got these recently for the board shown in this video: www.ebay.com/itm/264432844580?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=WAg4BDsQRIy&sssrc=2349624&ssuid=Xx-7xSDoTg-&var=&widget_ver=artemis&media=COPY
How many volts for the electrolytic capacitors? I’ve seen 50V, 100V, and 500V. I’m planning on building a few of these and I don’t want to mess anything up
@Bucket Mouse how can i order these stuff from ETSY to germany. Unfotunately It says it wont be shipped to germany. would love to get into repro/hack creating. Neat work anyways!
Do you know where i can get my hands on new chips for thr Gameboy carts if so if be very helpful since im getting into making games for the gb and i plan to use your carts and i wanr to technically make brand new 2023/24 carts for mg game if possible
This is bloody brilliant.
I'm going to be re-purposing so many sports cartridges.
todos lo pensamos jeje
If I were to use this to transplant from a damaged PCB from an original cart, are there sockets for the special chips? I have a cart with some worn down pins for the console interface. I am just looking for something to transplant all the chips over and then replace the caps and resisters with new.
Solid vid, helpful as always!
if the ceramic capacitor are (104) 0.1 µF 50V instead of (102) 0.1 µF 50V do you think it will be ok ?
Quick question, would your boards be good for transplanting from OEM boards? during my childhood lets just say i didn't treat the my games good and the pins are corroded from blowing in them. Would love to give my old games a new life on a brand new PCBs.
The Basic boards are designed to be board replacements! As long as the games don't use any specialty chips like the SuperFX or SA-1
mousebitelabs.com/2019/08/12/how-to-make-a-snes-reproduction-cartridge-quick-guide/
@@bucket_mouse I have a few SuperFX and SA-1 games, i'll probably have to find donor boards for those.
Can I ask where you purchase your 42 pin sockets? I bought a handful for making my own test cart and even with a lot of trimming I couldn't get them positioned flush with the pcb for both a lorom and hirom config like you have.
I got these recently for the board shown in this video:
www.ebay.com/itm/264432844580?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=WAg4BDsQRIy&sssrc=2349624&ssuid=Xx-7xSDoTg-&var=&widget_ver=artemis&media=COPY
for the Electrolytic Capacitor you writed Value: ~22 uF, at least 10 V rated is it good if the one i use are 22 uF, and 50 V
@@krisbalt2543 yep
How many volts for the electrolytic capacitors? I’ve seen 50V, 100V, and 500V. I’m planning on building a few of these and I don’t want to mess anything up
Do you have any recommendations on where and how to buy EPROM chips? The vast majority of what I can find are shady Chinese sellers with bad feedback.
The only place to get them now are eBay and AliExpress unfortunately. If you get defective parts you can request a refund.
Do NTSC boards fit inside PAL cartridges?
Yep they fit
Great stuff :0)
Puedes hacer un vídeo de como meter un hackrom en cartucho de Game Boy color?
@Bucket Mouse how can i order these stuff from ETSY to germany. Unfotunately It says it wont be shipped to germany. would love to get into repro/hack creating. Neat work anyways!
Do you know where i can get my hands on new chips for thr Gameboy carts if so if be very helpful since im getting into making games for the gb and i plan to use your carts and i wanr to technically make brand new 2023/24 carts for mg game if possible
Check out the github for the board you want to make - the parts list is there
how much it cost make a cartridge like that?
How many games can you put in a multi cartridge
Up to two
Is it possible to use 2x16mbit roms in slot 1/2 for a single 32mbit game with this board instead of one 32mbit rom?
@@user-uz1yv2oc9v unfortunately no